作物高产性的光合碳同化生理限制因子分析

对影响作物高产的光合作用碳同化的生理限制因子进行了分析，提出内外因子结合考虑是提高作物的光合效率和产量的关键．     

层间耦合对多壁纳米碳管光学特性影响的研究

研究了耦合效应对多壁纳米碳管非线性光致发光的影响.采用π 轨道紧束缚模型,从理论上得到了层间耦合会减小多壁碳纳米管的带隙和电子跃迁几率.从而说明了多壁碳纳米管的荧光很难观察到的原因.     

《左传》人物祸福预言类型考论

将<左传>中所记载的人物祸福预言,作出分类与考论,将其分为形貌,言语行为、梦境、卜筮、灾异、天象、歌谣(谶语)六类,并通过此类预言对其所具有的社会思想价值作出分析与评论.     

Solid-state Synthesis of Carbon-nanostructures

1 Results In addition to single wall and multiwall carbon nanotubes[1], several structures,which are more or less related to fullerenes,including carbon nanohorns[2a], carbon nanospheres[2b] and onion like carbon structures[2c] have been reported.A new simple straight forward method to access some of these structures is the solid-state pyrolysis of different organometallic complexes in a sealed vessel,which led so far to carbon nanotubes[3a,b], carbon nanocables[3c] and onions[3d].     

Fe/SiO2催化剂的快速制备及催化生长碳纳米管

以纳米二氧化硅吸附和分散FeCl3.6H2O,采用旋转蒸发-高温还原法合成出Fe/SiO2催化剂。采用化学气相沉积法制备碳纳米管,使用SEM和TEM对产物进行了表征。结果表明,当Fe/(SiO2 Fe)(物质的量比)为17.5%时,能够制备出高质量的直径为30~50nm的多壁碳纳米管。     

Samples Selection for Artificial Neural Network Training in Preliminary Structural Design

An artificial neural network (ANN) is applied in the preliminary structural design of reticulated shells. Major efforts are made to enhance the generalization ability of networks through well-selected training samples. Number-theoretic methods (NTMs) are adopted to generate samples with low discrepancy, i.e.uniformly scattered in the domain, where discrepancy is a quantitative measurement of the uniformity. The discrepancy of the NTM-based sample set is 1/6-1/7 that of samples with equal spacing. In a case study,networks trained by NTM-based samples are compared with those trained by equal-spaced samples in generalizing performance. The results show that both the computational precision and stability of the former ANNs are more satisfactory than those of the latter. It is concluded that the flexibility of ANNs in generalizing can be effectively increased by use of uniformly distributed training samples rather than simply piling data.More reliable uniformity should be obtained, however, through NTMs instead of equal-spaced samples.     

碳钢表面生成黄铁矿保护膜的研究

研究了碳钢表面在H_2S水溶液中,迅速生成黄铁矿保护膜的机理和工艺条件。用X光衍射和扫描电镜形貌观察确认,在Fe-H_2S-H_2O系中产生的各种硫化铁腐蚀产物的物相及其转化次序。实验结果指出,当反应温度高于100℃时,产生二硫化物S_2~(2-)离子,提高pH值,能降低溶解Fe~(2+)浓度,这是迅速生成黄铁矿的必要条件。     

Mindlin层合圆柱壳理论的Hamiltonian结构与辛解析解

通过引进状态变量及其对偶变量。建立Ｍｉｎｄｌｉｎ层合圆柱壳的Ｈａｍｉｌｔｏｎ正则方程．在辛几何数学框架下，采用共轭辛正交归一关系给出各种复杂边界条件下的精确解．     

化学一级强化+悬浮填料活性污泥处理污水

针对浙江无锡市惠山区新建的惠山污水处理厂设计工艺,采用化学一级强化处理工艺及悬浮填料活性污泥法,并且就这两种工艺结合组成的二级强化处理工艺在工程实践中的应用作了技术可靠性和经济合理性分析.得出化学一级强化及悬浮填料活性污泥法的处理工艺具有工程投资省、适应水质变化操作灵活等优点.但由于没有太多运行经验,所以需要一个逐步摸索的过程.     

稀土高碳当量灰口铸铁组织与性能的研究

本文研究了利用稀土合金改善高碳当量灰口铸铁质量的可能性,稀土合金对高碳当 量灰口铸铁组织和性能影响的规律,以及稀土夹杂物在铸铁各相中分布的规律．发现了 稀土合金加入量与铸铁的机械性能之间明显的对应关系——“双峰值效应”。对稀土高 碳当量灰口铸铁的某些高温机械、物理、化学性能进行了研究。结果表明稀土合金加入 到高碳当量灰口铸铁中以后能净化铁水,改善组织,并提高其性能．