甲基萘转移甲基化合成2,6-二甲基萘

以β-甲基萘和混合甲基萘为原料,均四甲苯和偏三甲苯为烷基化剂,无水alCl3为催化剂,二氯甲烷为溶剂,进行转移甲基化反应合成2,6-二甲基萘.考察了反应温度、催化剂和烷基化剂的加入量以及烷基化剂种类对反应结果的影响.     

钢-混凝土连续组合梁桥的理论分析和试验研究

根据完全剪力连接的连续组合梁桥的构造特点及各部分受力机理,做出合理假设,提出分层平面框架计算模型该计算模型用于沈阳市东西快速干道工程某段连续组合梁桥,计算值与静载试验实测值非常接近,证明了本计算模型用于钢-混凝土连续组合梁桥正确实用的.     

全球化知识经济潮流与两岸未来教育发展趋势（Ⅱ）——以指标评价为基础的检证观点

3．3评价结果 3．3．1多元尺度法 (1)评价对象 1)检定值 依据多元尺度法分析结果，采三维构面进行17个评价对象的空间配置，压力系数可达0．03769．R^2为0．98917，介于“非常好”与“好”之间；若采二维构面进行空间配置，则压力系数值为0．14148，介于“还可以”与“不好”之间(参表2)，R^2为0．89671．     

Resource Search in Unstructured Peer-to-Peer System Based on Multiple-Tree Overlay Structure

We propose a multiple-tree overlay structure for resource discovery in unstructured P2P systems. Peers that have similar interests or hold similar type of resources will be grouped into a tree-like cluster. We exploit the heterogeneity of peers in each cluster by connecting peers with more capacities closer to the root of the tree. The capacity of a peer can be defined in different ways （e.g. higher network bandwidth, larger disk space, more data items of a certain type etc.） according to different needs of users or applications.     

一类非线性分式规划问题的最优性条件和对偶

在(F,α,,ρd)-凸和广义(F,α,,ρd)-凸的基础上,讨论了一类非线性分式规划问题的最优性条件和对偶,获得了Kuhn-Tucker最优性充分条件及对偶问题的弱对偶结果.     

纳米固体超强酸SO42-/ZnO催化合成乙酸异戊酯的研究

本文利用纳米固体超强酸SO4^2-/ZnO催化合成乙酸异戊酯的最佳反应条件,既反应时间2.0h,催化剂用量为酸质量的1.0%,酸醇比为1∶2,验证实验产率为96.7%,且该实验反应时间短,无腐蚀无污染,催化剂可回收可重复利用.     

创新在修旧利废工作中的作用

创新在各项工作发展前进的不竭动力,LS-80-1600型多功能割带机是兴隆庄煤矿自主创新研制成功的废皮带加工装置,本文重点介绍该机器的工作原理和经济效益。     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

关于2-群的注记

通过对2-群的研究，得到了一类2-群的结构，进而给出了一类无限2-群有无限的阿贝尔子群的例子．     

2,3-二溴甲基-5,6-二氰基吡嗪的合成新方法

以2,3-二甲基-5,6-二氰基吡嗪为原料,在AIBN的引发下,用NBS进行自由基溴化反应,合成了标题产物,其结构经熔点,MS,1HNMR,UV等予以确证,从而为该物质的合成探索了一条新途径.