生质柴油碱性均匀相触媒制程研究

生质柴油为重要之可再生能源。本文研究改善液相触媒制程,以降低甲醇与三酸甘油酯间界面阻力,以提生反应速率。实验结果发现,在批式制程中,提高搅拌速率可提升反应速率,然因工厂实际操作恐有困难。以相转移触媒可达增加反应速率与产率效果,但需注意选用之相转移触媒不可在强碱下被破坏。使用共溶剂THF可促进反应速率与产率,为一可行的选择。而连续制程较批式制程有较好的效率。     

一类带有局部化源的反应扩散方程组解的整体存在性及爆破

考虑一类带有局部化源项的反应扩散方程组.在适当的假设下,用上、下解法得到了该问题的解在有限时刻爆破及整体存在的充分条件.     

Bis-Wittig反应法合成不对称二烯腊肪酸酯

双季鏻盐1与n-BuLi反应生成膦双叶德2,接着与两种不同的醛发生bis-Wittig反应成功地合成了天然产物二烯脂肪酸甲酯7a及两个新的类似物7b和7c,产率为24%～30%.该法具有原料易得,路线短等特点.产物的结构用IR、1HNMR、和Ms等进行了表征.图3,参16.     

贝叶斯规整化神经网络预测苯取代物的毒性

利用贝叶斯规整化神经网络(BRNN)研究了59种苯取代的环境毒性和分子结构的关系.建立了基于脂水分配系数和4种量子指数的QSAR环境毒性预测模型.结果表明:该模型的预测性能超过偏最小二乘法(PLS)和逐步线性回归方法,残差分析显示其稳定可靠,有望成为一种良好的苯取代物毒性的环境评价和预测的方法.     

标准态下碳酸二甲酯合成体系热力学分析

 用Benson基团贡献法计算了碳酸二甲酯(DMC)的热力学数据标准摩尔生成焓Δ_fH_m^θ、标准摩尔生成吉布斯自由能Δ_fH_m^θ和等压摩尔热容C_p,m;在标准态下,300~1 000 K温度范围内对比了甲醇或二甲醚(DME)氧化羰化合成DMC,甲醇或DME与CO₂直接合成DMC,由合成气合成DMC,DME,甲醛或甲醇这些反应的焓变Δ_fH_m^θ、吉布斯自由能变Δ_fH_m^θ和平衡常数lnK^θ.计算结果表明:在讨论的条件范围内,由DME氧化羰化合成DMC是热力学上可自发进行的反应,但DME和CO₂反应合成DMC与甲醇和CO₂反应合成DMC,均不能自发进行(需要通过耦合等方式来改变反应途径或重构反应体系,该反应才有可能进行).此计算将为合成DMC的反应路线设计以及新催化剂体系的探索提供热力学依据.     

Preparation of polypropylene/montmorillonite nanocomposites by intercalative polymerization： Effect of in situ polymer matrix functionalization on the stability of the nanocomposite structure

The copolymerization of propylene and 5-hexenyl-9-borabicyclo[3.3.1]nonane (5-hexenyl-9-BBN) has been conducted with an MgCl2/TiCl4 catalyst intercalated in an organically modified montmorillonite (OMMT) with triethylaluminum (AlEt3) cocatalyst and diphenyldimethoxysilane (DDS) external donor. This polymerization process simultaneously results in both the exfoliation of MMT layers to realize the preparation of polypropylene (PP)/MMT nanocomposites and the implantation of reactive borane groups in the formed PP matrix. The polymer-borne borane groups have been able to undergo an effi-cient hydrolysis process under very mild reaction conditions (40℃, 3 h, in THF), introducing hydroxy groups into PP without sacrificing the polymerization-formed nanocomposite structure (the exfoliation of MMT). The resultant hydroxyl-functionalized PP/MMT nanocomposites exhibit enhanced structural stability against processing compared with those based on unfunctionalized PP matrix.     

Experimental investigation of incremental reactivity of di-tert-butyl peroxide

Large quantities of di-tert-butyl peroxide (DTBP) have been emitted into the troposphere due to human activities. Its role in the atmospheric photochemical reaction has not been understood. This study presents the results of the photochemical reactions of DTBP and NOx, which have been simulated in a self-made smog chamber under the temperature of (29±1)℃. Both the wall decays of ozone and NO2 could be neglected, compared to the results in simulative experiments. The effective intensity of UV light used in the experiments was 1.28×10-3 s-1, which was expressed by the rate constant of NO2 photolysis in purified air. The reaction mechanism was proposed according to our results and reports of other researchers. The maximum values of incremental reactivity (IR) in the three simulative ex- periments were 9.53×10-2, 5.23×10-2 and 3.78×10-2, respectively. The incremental reactivity decreased with the increase of initial concentrations of DTBP. The IR value of DTBP obtained in this study was comparable to that of acetylene reported in our previous research.     

DNA编码的模型分析

提出了适应DNA计算的DNA编码问题.对等码长的DNA编码问题的数学模型进行分析.以优化码长作为目标,分析了约束条件.以杂交反应为核心将约束条件分为基本约束和控制生化实验的约束,而控制生化实验的约束包含组合约束和热力学约束.控制移动不匹配的下值才能控制杂交反应,由此改进了移动距离.引入窗口距离解决了错配总量和分布的控制问题.     

二甲醚HCCI发动机微量排放物的研究

根据优化气相色谱仪工作条件,对二甲醚均质充量压燃(HCCI)发动机排气中的甲醛和甲酸甲酯进行了检测.通过二甲醚简化反应机理与Fluent的耦合联算,以及结合Woschni传热模型和DME详细反应机理的Chemkin反应动力学数值模拟,对二甲醚HCCI发动机的燃烧过程及其微量排放物(甲醛、甲酸和甲酸甲酯)进行了预测分析.结果表明:在一定条件下,甲醛、甲酸和甲酸甲酯存在于排气中,其排放量均随过量空气系数的减小而减小,发动机转速、进气温度和压力对其影响也很大.     

纳米四水羟基硝酸氧铋的制备及在氮气气氛下的热分解动力学

利用反相微乳液法制备出了纳米四水羟基硝酸氧铋[Bi6O4(OH)4](NO3)6(H2O)4,并以热分析为手段对纳米[Bi6O4(OH)4](NO3)6(H 2O)4的热分解过程和非等温热分解动力学机理进行了研究.动力学研究确定了[Bi6O4(OH)4](NO3)6(H2O)4脱硝酸根反应属于球对称的三维扩散的D3机理,热分解表观活化能为E=98.90033 kJ/mol,lnA=27.13109.