Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.     

冻结黏土的强度与变形特性及参数研究

为了更全面地分析冻土的强度与变形特性,以皖北某矿取样的原状黏土为研究对象,进行不同温度(-5℃、-10℃、-15℃)下的单轴抗压强度试验和三轴剪切强度试验.试验结果表明,在试验温度下,试样单轴抗压强度的应力-应变曲线为应变软化型;试验条件下,冻土三轴剪切应力-应变曲线可以用双曲线模型描述.随着温度的降低,冻土的单轴抗压强度和弹性模量均增加.初始弹性模量和极限偏应力均与围压呈正相关,与温度呈负相关.冻土的抗剪强度随围压增加而增大,随温度增加而减小.通过冻土三轴试验得到的抗剪强度指标推算单轴抗压强度,可以为人工冻结法施工提供理论依据.     

Fuzzy Views on Black-Litterman Portfolio Selection Model

In this paper, views of investor are described in fuzzy sets, and two fuzzy Black-Litterman models are constructed with fuzzy views and fuzzy random views respectively. In the models, expected returns and uncertainty matrix of views are redefined and the views are formulated by fuzzy approaches suitably. Then the models are tested with data from Chinese financial markets. Empirical results show that the fuzzy random views model performs the best, and both the fuzzy models are better than the traditional ones, demonstrating that the fuzzy approaches can contain more information in the views and measure the uncertainty more correctly.     

新生代农民工收入消费统计分析——基于郑州市817位新生代农民工调查数据

近年来,我国农民工群体正处在代际更替的阶段,新生代农民工有其独特的消费观念、消费结构和消费行为。同时,新生代农民工也面临生产生活方式和消费方式的变化,其收入提高与消费行为转变更是实现我国经济转型的重要推动力。基于此,本文选取郑州市作为样本地区,对新生代农民工的收入状况、消费观念和消费行为进行实地调查,运用Logist模型分析其收入状况、消费观念对其消费行为选择的影响。最后,从改善新生代农民工收入状况、人力资本提升和消费观念的引导等方面提出科学、合理的建议。     

人类卫生健康共同体视域下的全球科技合作研究——以新冠肺炎疫情为背景

新冠疫情暴发以来,中国政府和人民秉持人类命运共同体理念,运用一系列先进技术,在较短时间内扭转了国内疫情的严峻形势.在此背景下,为了更好地发挥中国方案在全球抗疫中的作用,文章运用内容分析法和归纳分析法,首先梳理了从人类命运共同体到人类卫生健康共同体的理论逻辑,其次探究了人类卫生健康共同体、全球科技合作与疫情防控之间的结构关系,最后分析了中国疫情防控的有效举措,进而得出结论:中国疫情防控工作的成效离不开人类命运共同体理念的指引和全球科技合作的开展,而中国在平台建设、机制整合及合作网络等领域的方案共享将有助于遏制全球疫情的蔓延.     

Speeding Up the GVW Algorithm via a Substituting Method

Journal of Systems Science and Complexity - The GVW algorithm is an efficient signature-based algorithm for computing Gröbner bases. In this paper, the authors consider the implementation of...     

高温作用后砂岩物理力学性质阈值温度的确定——基于机器学习算法

通过采用机器学习算法，提出了高温作用后砂岩物理力学性质变化的阈值温度的确定方法。基于Python语言，利用K-Means、SVM算法，实现了对样本数据的分类和聚类，确定了阈值温度区间，验证了二分类法的合理性和准确性.结果表明，砂岩样本的阈值温度区间为400~600 ℃，阈值温度上下砂岩的物理力学性质存在显著差异，体现为阈值温度区间以下的岩样物理力学性质较为分散，而阈值温度区间以上的岩样物理力学性质较为集中.     

Simultaneous anti-windup synthesis for linear systems subject to actuator saturation

A synthesis method for global stability and performance of input constrained linear systems, which uses a linear outputfeedback controller and a static anti-windup compensator is investigated. Different from the traditional two-step anti-windup design procedure, the proposed method synthesizes all controller parameters simultaneously. Sufficient conditions for global stability and minimizing the induced L2 gain are formulated and solved as a linear matrix inequalities(LMIs) optimization problem, which also provides an opportunity to search for a better performance tradeoff between the linear controller and the anti-windup compensator.The well-posedness of the close-loop system is also guaranteed.Simulation results show the effectiveness of the proposed method.