钠快离子导体Na_(2.5)Zr_(2-x)Ti_xSi_(1.5)P_(1.5)O_(12.0)系统的研究

钠快离子导体Ｎａ_２．５Ｚｒ_２－ｘＴｉ_ｘＳｉ_１．５Ｐ_１．５Ｏ_１２．０系统ｘ＝０－２．０的化合物，由Ｎａ_３ＰＯ_４－ＺｒＯ_２－ＺｒＰ_２Ｏ_７－ＳｉＯ_２－ＴｉＯ_２为反应的起始原料，在９００℃－１２００℃的高温下反应数小时至二十小时制得。系统化合物的相变关系已探明，并测定了有关的单纯相在不同温度下的导电率以及电导激活能。相当于起始组成为Ｎａ_２．５Ｚｒ_１．０Ｔｉ_１．０Ｓｉ_１．５Ｐ_１．５Ｏ_１２．０的单纯相（标为２．５１相）在３００℃时的导电率σ３００＝１．８５×１０－２（Ω·ｃｍ）－１，其电导激活能为２３．６４ｋＪ／ｍｏｌｅ，相当于起始组成为Ｎａ_２．５Ｔｉ_２．０Ｓｉ_１．５Ｐ_１．５Ｏ_１２．０的单纯相（标为２．５２相）在３００℃时的导电率σ３００＝０．４６×１０－２（Ω·ｃｍ）－１，其电导激活能为２８．８９ｋＪ／ｍｏｌｅ．     

温公颐中国逻辑史研究方法论初探

温公颐先生中国逻辑史研究的方法论涉及一般原则和具体方法两个层面。其中,一般原则主要包括"贵有创见"、实事求是和发展的观点3个方面。具体方法主要有比较的方法、语言学的方法以及逻辑与历史统一的方法等。温公颐中国逻辑史研究的方法论,在一定意义上是对近代以来中国逻辑史研究中简单比附这一思路与方法的有力矫正。     

Functional magnetic resonance imaging of amphetamine craving

The aim of this study is to identify the brain activity associated with amphetamine craving for understanding the neurobiology of addiction by watching pictures of happy, sad or amphetamine. Brain activity was measured in 12 amphetamine addicts and 12 healthy subjects by fMRI while the subjects watched pictures designed to elicit happy feelings, sad feelings, or the desire to use amphetamine. The result demonstrated that amphetamine cues led to abnormally high cingulate and low frontal lobe activation in amphetamine addicts, who showed abnormalities in affect-related brain activation.     

An ERP study for the degrees of the difficulty in visual search

The present study mainly probed the relationships between ERP components and the degrees of difficulty in visual search. Three experimental and one controlled conditions were randomly selected. Results showed that the P1, N1, and P2 amplitudes and latencies had no significant differences among the three experimental and one controlled conditions, and the ERP waveforms of low perceptual load of visual search were different from that of high perceptual load. These results might indicate that the latencies and amplitudes of initial P1, N1 and P2 in high and low perceptual load conditions were almost the same. The ERP waveforms of parallel search were very different from that of serial search, and the ERP waveforms of serial search were very similar. The P3 amplitudes increased as the degrees of the difficulty in visual search decreased.     

基于PLC的温度控制在电镀生产线中的应用

介绍了以三菱FX0NPLC为核心的温度控制系统在电镀生产线中的应用。简述了温度控制原理,论述了控制系统的设计方案及其软硬件的实现方法。实践表明该方法简单易行,适应性好,可靠性高。     

水切割机中超高压预应力复合缸体研究

针对水切割机中高压缸经常爆裂的现象,本文研究了预应力缸体、高压缸的失效原因及预应力缸体的基本特点,最后进行了缸体疲劳实验。     

Molecular cloning and expression of interleukin Ibeta (IL-1β) from red seabream (Pagrus major)

The interleukin 1β (IL-1β) cDNA was cloned from the red seabream (Pagrus major) by homology cloning strategy. A cDNA fragment was amplified by PCR using two degenerated primers, which were designed according to the conserved regions of other known IL-1β sequences, and elongated by 3' ends and 5' ends RACE PCR to get the full length coding sequence of red seabream IL-1β (RS IL-1β). The sequence contained 1252 nucleotides that included a 5' untranslated region (UTR) of 84bp, a 3' UTR of 410 bp and an open reading frame (ORF) of 759 nucleotides which could be translated into a putative peptide of 253 amino acids with molecular weight of 28.6 kD and putative isoelectric point pI of 5.29. The deduced peptide contained two potential N-glycosylation sites and an identifiable IL1 family signature, but lacked the signal peptide and the clear ICE cut site, which were common in other nonmammalian IL-1β genes. The RS IL-1β had the highest homology with piscine IL-1β according to phylogenetic tree analysis.     

育种目标性状间的同一关系分析方法研究

借助集对分析理论,提出了一种新的育种目标性状间的关系分析方法,阐明了其基本原理与分析步骤,并结合小麦育种实例,介绍了这种分析方法的具体应用。在此基础上,讨论了这种分析方法的优越性及尚待改进之处。表3,参9。     

Development of Full Automatic External Welding Machine for Annular Welds of Pipeline

To meet the demands of rapid development of pipeline constructions in China, a complete set of full automatic external welding machine for annular welds of pipeline and welding procedure have been developed thereof. The system has been applied in the “West-East Pipeline Project” and its performance is proven. With this welding machine the welding parameters can be either preset before or adjusted in real time during the welding process, which avoids the blemishes of same type domestic and international products. Thus it is best propitious to in-situ construction conditions and workers‘ technical level in China. In this article the development of mechanical and control systems of this product is introduced and typical welding procedure parameters are provided.     

制备介孔复合环境材料的酸洗刻蚀工艺

探索了一种制备介孔复合环境材料的方法--破坏式造孔与有机复合相结合,使最终产品可大量吸附污染水体中的各种污染物并具有一定的杀菌功能.该方法通过酸洗刻蚀,达到了去除原材料中的杂质和刻蚀孔径的目的,所制备的中间产品24h吸湿率为原材料的2倍,染料吸附量为原材料的1.6倍.