基于协同环境的混合实时任务调度模型

针对协同处理应用的混合实时任务调度需求,提出了基于预取时间的虚拟服务器调度模型,给出了模型调度中的相关算法,论证了算法的可调度性.该算法基于资源划分补给策略,可以实现多种调度算法在同一个实时调度系统中的并发工作.实验结果表明该模型具有很好的调度效果.     

电阻绝缘检测中低压脉冲信号注入法的算法改进

在有源式低压脉冲信号注入法的基础上,重新推导了计算电阻值的数学模型,并设计了一种运用该模型的有源式动力电池绝缘电阻监测系统,该系统可以有效地解决部分无源式和有源式绝缘检测法无法有效精确测量同时下降的正负端绝缘电阻与正负端单侧绝缘电阻的问题.此外,通过台架实验验证了该监测系统的有效性,在改进电动汽车动力电池监测系统方面具有一定的应用价值.     

竖向荷载下分布式连接全装配RC楼盖横板向受力性能试验研究

为研究分布式连接全装配RC楼盖(DCPCD)横板向受力性能,进行了6个足尺DCPCD试件和2个现浇试件在竖向均布荷载下的静载试验,分析了试件的破坏模式、挠曲变形和应变发展规律.结果表明,DCPCD板缝连接件传力性能良好,试件弯曲刚度小于现浇试件,没有明显的塑性工作阶段,且较早进入弹塑性.DCPCD横板向挠曲变形以板缝变形和预制板转动为主,横板向变形曲线由多段直线在板缝位置处连接而成.DCPCD的板缝构造对楼盖横板向传力效果和弯曲刚度有较大影响,建议采用宽板预制方案和奇数板楼盖布置方法.然后,基于共轭法理论,提出了DCPCD弹性阶段横板向弯曲刚度计算方法,理论计算值与试验结果吻合良好,说明该方法可为四边支承条件下DCPCD的竖向承载力与变形计算提供依据.     

以木聚糖为抗菌剂的木质地板抗菌性能

随着生活水平的提高,人们越来越重视室内家居环境的健康、环保问题.因此,研究、开发抗菌实木地板具有现实意义.采用贴膜法检测抗菌地板的抗菌性能:以木聚糖为抗菌剂,用8%浓度溶液浸泡杨木单板,接种一定数量的大肠杆菌和金色葡萄球菌.经过一段时间培养后,检测地板细菌数量.结果表明:经过木聚糖溶液处理的地板对大肠杆菌和金色葡萄球菌的抗菌率为73.58%和90.09%,抗菌等级达到Ⅱ级.     

基于改进射线跟踪法的隧道环境无线信道仿真

隧道环境与陆地上移动通信有显著不同,需要对其无线信道特性进行研究.本文提出了一种改进的射线跟踪法,能够对隧道环境无线信道特性高效地仿真,降低了射线跟踪的计算复杂度,同时采用一种新的坐标系描述弯道的几何形状,便于对弯道部分进行射线跟踪.本文将路径损耗的仿真结果与北京地铁14号线的实测结果进行对比,对比表明:改进的射线跟踪法能够有效地预测路径损耗;直道中K因子在-8～25 dB范围内变化,且随着距离增大有减小的趋势.     

水泥搅拌桩在路基加固处理中的控制要点

水泥搅拌桩的加固原理是用水泥做固化剂,是一种应用较广泛的地基加固方法,利用地基土中的孔隙水进行水化反应后,再行固结,达到改良地基的目的.文章对水泥搅拌桩施工质量作了相关探讨.     

Influences of ultrasonic irradiation on the morphology and structure of nanoporous Co nanoparticles during chemical dealloying

The Co-61.8 wt% Al nanoparticles of 45 nm were prepared by hydrogen plasma-metal reaction (HPMR) method. The nanoparticles display core shell structure with Al13Co4 and CoAl core and aluminum oxide shell (about 2 nm). Under ultrasonic irradiation, nanoporous fcc-Co nanoparticles were produced successfully by chemically dealloying the Co-Al nanoparticles at room temperature, whereas, without ultrasonic irradiation CoAl phase could hardly react with sodium hydroxide solution. At 323 K the Co-Al nanoparticles could be dealloyed to fcc-Co and hcp-Co phases even without ultrasonic irradiation. The surface area of the dealloyed nanoparticles under ultrasonic irradiation was larger than that of the dealloyed sample without ultrasonic irradiation at the same temperature. It is believed that the microjet and shock-wave induced by ultrasonic irradiation give rise to particles size reduction, interparticle collision and surface cleaning, and accelerate the dealloying process and the phase transformation.     

SNCR应用于水泥窑氮氧化物控制的氨氧化

为了对水泥窑应用SNCR控制技术时CaO催化NH3氧化问题进行研究,该文采用固定床反应器,研究温度(650～950℃)、NH3体积分数(100×10-6～1500×10-6)和O2体积分数(0～4%)对于CaO催化NH3氧化作用的影响。采用Fourier变换红外光谱仪(FTIR)测量NH3和NO组分的体积分数。实验结果表明:CaO催化NH3氧化反应的转化率和产物NO的选择性随NH3体积分数增加而下降,随温度和O2体积分数增加而增加。基于NH3转化率和产物NO选择性随NH3体积分数的变化规律,提出CaO催化NH3氧化的首要途径是NH3和O2的吸附,吸附态NH3会与O2反应生成NO,而非前人提出的NH3与CaO反应生成CaN。采用该机理可以较好地解释实验规律。     

Effect of Ni addition on the glass-forming ability and soft-magnetic properties of FeNiBPNb metallic glasses

The effect of Ni addition on the glass-forming ability (GFA) and soft-magnetic properties of an (Fe1-xNix)75.5B14.5P7Nb3 (x=0-0.6) alloy system were investigated. We found that the addition of Ni was effective in allowing the alloy to approach a eutectic point as well as increasing the thermal stability of the supercooled liquid. By increasing the amount of Ni,the supercooled liquid region (ΔTx),the reduced glass transition temperature Trg (Tg/Tl) and the Y parameter [Tx/(Tg+Tl)] increased from 49 to 75 K,0...     

Surface pollen assemblages of human-disturbed vegetation and their relationship with vegetation and climate in Northeast China

Pollen assemblages of 53 surface pollen samples from farmlands and wastelands in Northeast China were analyzed. Tree pollen percentages were usually higher than 30%, with Pinus (26.9%), Quercus (0.9%), Betula (0.9%) and Populus (0.7%) as the major types, and herb pollen percentages were usually higher than 50%, with weedy Poaceae (8.7%), Chenopodiaceae (7.1%), Artemisia (1.9%) and Compositae (3.5%) as the major taxa. Thus, the pollen assemblages were consistent with the regional vegetation compositions. However, there were differences in pollen assemblages among regions, especially among different geomorphological units. For example, in the mountains, there were more types of tree pollen and higher total percentages (average 42%) than in other areas, while cereal pollen percentages were lowest (11.2%). In the hills and high plains, herbs made up more than 60% of the pollens, with cereals (average 53.6%) the dominant type. In the low plains, pollen types were similar to those in the hills and high plains, but total pollen concentrations and the proportion of Concentricystes were much higher, while cereal pollen percentages were slightly lower (average 41.6%). Pollen assemblages in different land use types also differed. For example, in farmland, cereal pollen percentages were more than 40% and Chenopodiaceae was usually less than 2.5%, while in wasteland, weedy Poaceae was usually less than 10% and Chenopodiaceae was usually higher than 25%. Total pollen concentrations in farmland (average 3909 grains/g) were much lower than in wasteland (average 15074 grains/g). Redundancy analysis revealed that pollen assemblages were significantly negatively correlated with mean annual temperature (-0.73) and July mean temperature (-0.81) and significantly positively correlated with mean annual precipitation (0.48), indicating that pollen assemblages in the artificial or human-disturbed vegetation reflect regional climate well. Comparison of pollen assemblages in different areas of northern China showed that pollen concentrations reflect the intensities of human impact to some degree. For example, pollen concentrations decrease as human impacts increase in intensity. The cereal pollen proportions in farmland differed by area. In Northeast China, cereal pollen proportions were distinctly higher than in most other areas of northern China, suggesting differences in planting habits and climate.