利用DCT有效实现正交复用QAM系统

正交复用 QAM(O-QAM)系统是一个相邻载频间隔为波特率的多路系统,可以用数字信号处理技术实现.这种系统在复用路数无限增加时可以达到奈奎斯特速率,并且对传输媒介引超的延迟和幅度失真不灵敏.本文提出用离散余弦变换(DCT)处理器级联一个权重网络实现 O-QAM 系统的新方案.该方案由于充分利用了 FIR 滤波器系数的对称性,使权重网络计算量明显下降.DCT 通过快速卷积算法获得,总计算量明显下降.     

DCS中的数据库分配

本文应用软件工程的思想,在分布式计算机系统中,对已有配置的计算机集,提出一种数据库分配方法,给出此问题在一定约束条件下的数学模型并介绍一个解此问题的启发式算法,使系统的可冗余数据库存贮的通信费用达到最小。     

硅、锗中硼、磷杂质的振动特性

本文用六原子模型．分析丁硼、磷原子在硅、锗半导体中刃位错附近的三维振动特性．     

Horn集上的有向调解法

本文证明了在一定条件下输入有向调解法在Horn集上是完备的,进而得出了在该条件下的单元有向调解法对Horn集的完备性。     

光催化H2O2氧化荧光法测定艾司唑仑

研究了艾司唑仑在光催化下Ｈ２Ｏ２氧化产物的荧光性质，提出一种测定艾司唑仑的新方法．标准曲线的范围为０．６０～５．６０μｇ·Ｍｌ（－１），方法的相对标准偏差和检测限分别为２．１％和０．３１μｇ·ｍＬ（－１）．可直接用于片剂中艾司唑仑含量的测定．     

嵊泗列岛养殖海区浮游植物、赤潮生物的研究

本文列出了嵊泗列岛养殖海区1990年4月至1991年3月主要生态调查结果。浮游植物密度:0.5m 水层为1.62×10~2——2.51×10~6Cells/L,0—7m 水层为1.8×10~4——3.65×10~8Cells/m~3,八月和十一月出现两次高峰,周年出现浮游植物143种、赤潮生物38种,6—9月是该区赤潮发生季节。此外,还对几种主要赤潮生物的周年变化和发生赤潮时该赤潮生物的衰变特点进行了分析,对两年发生六次赤潮的生物组成、赤潮与赤潮生物密度之间的关系进行了讨论。     

15MnMoVNRe钢焊接近缝区拘束应变—相变—韧性之间的关系

以不同焊接热循环分别联合不同拘束应变循环两模拟试验结果,证明在同一热循环作用下,随着拘束应变量的增大使15MnMoVNRe钢CCT图中的B_?和M_?点逐次向左上方移动,从而对其显微组织和其精细结构发生了显著的作用,导致其韧性各异。当有该应变存在时所获得的韧性均高于无拘束应变的,并且该应变ε_max为1%时韧性最高。     

Miniaturized volume holographic optical data storage and correlation system with a storage density of 10 Gb／cm^3

The general idea of holographic optical data storage (HODS) is briefly introduced. Based on the recent advances of HODS, the key techniques and the challenges of HODS are discussed. Some new techniques are proposed to improve the system. A miniaturized volume holographic data storage and correlation system is presented. It can achieve a density of 10 Gb/cm^3 and a fast correlation recognition rate of more than 2000 images per second. It shows the attracting potential advantages over other conventional storage methods in the information storage as well as information processing.     

Intersections of two offset parametric surfaces based on topology analysis

Conventional methods for solving intersections between two offset parametric surfaces often include iteratively using computationally expensive SSI (surface/surface intersections) algorithm. In addition, these methods ignore the relations between the intersection curves of parametric surfaces with different offset distances. The algorithm presented in this paper, makes full use of the topological relations between different intersection loops and calculates intersection loops with the help of previously calculated intersection loops. It first pre-processes two parametric surfaces to obtain the characteristic points, called topology transition points (TTPs), which can help in the subsequent finding of the topologies of the intersection curves. Then these points are categorized into several distinct groups, and we can determine the calculation strategy for searching initial points by analyzing the properties of these TTPs on the surfaces. Hence, all intersection curves can be marched from initial points by the tracing algorithm. The proposed algorithm could calculate intersection curves robustly and effectively, and has been tested to be capable of overcoming the degenerate conditions such as loop and singularities leaking that occur frequently in conventional algorithms.     

Distributed collaborative CAD system based on Web Service

This paper presents a novel Web Service based distributed collaborative CAD system employing feature as its collaborative design element and uses XML to define feature operations and communication protocol between the server and the client. To reduce network load and increase response ability of the system, the feature information is updated incrementally on the client. The system supports collaborative designing on heterogeneous platforms. Its framework and communication protocols are analyzed in detail. The experimental results from the developed prototype system showed that it can effectively support collaborative design under the distributed environment.