Mineralogical and sink-float studies of Jajarm low-grade bauxite

Jajarm’s bauxite deposits are mainly diasporic, and they have a low mass ratio of Al₂O₃/SiO₂. It is necessary to increase the run-of-mine mass ratio before feeding the material to the Bayer process. Chemical analysis indicated that the low-grade bauxite sample from Jajarm contained 43.9wt% Al₂O₃ and 13.35wt% SiO₂, resulting in a mass ratio of 3.29. According to mineralogical studies, the presence of aluminosilicate minerals such as kaolinite, illite, and quartz was the main reason for the decrease of the mass ratio. Microscopic observations revealed that, with the size reduction from -1000+710 to -38 μm, the liberation degree of diaspore increased from 10% to 60%, and that of aluminosilicates increased from 20% to 85%. Heavy liquids with the densities of 2.8, 3.0, 3.2, and 3.4 g/cm3 were used to evaluate the heavy media separation in three sizes, i.e., -3350+710, -710+212, and -212+125 μm. Laboratory studies confirm that the density of 3.2 g/cm3 can produce the concentrates (in sunk fractions) with recoveries of 89.09%, 91.24%, and 84.68% with the Al₂O₃/SiO₂ mass ratios of 5.03, 5.16, and 5.15 for the -3350+710, -710+212, and -212+125 μm sizes, respectively.     

Molybdenite alkali fusion and leaching: reactions and mechanism

The production of MoO₃ from Sarcheshmeh molybdenite concentrate via a pyro-hydrometallurgical process was studied. The molybdenite concentrate and sodium carbonate were premixed and fused under air atmosphere. Then the fused products were leached in water and the dissolved molybdenum was recovered as ammonium molybdate. The ammonium molybdate was then calcined to produce molybdic oxide. At the fusion stage, the effect of the mass ratio of carbonate to sulfide on the reaction products and the solubility of the products was investigated. The results show that during the fusion, sodium molybdate and sodium sulfate are the final reaction products and sodium sulfide is detected as an intermediate reaction product. By melting at 850℃ with 5wt% excess carbonate, the maximum solubility of the products is obtained. The molybdenum is recovered from the solutions as ammonium molybdate.     

Bandwidth optimization of a Planar Inverted-F Antenna using binary and real coded genetic algorithms

With the exponential development of mobile communications and the miniaturization of radio frequency transceivers, the need for small and low profile antennas at mobile frequencies is constantly growing. Therefore, new antennas should be developed to provide larger bandwidth and at the same time small dimensions. Although the gain in bandwidth performances of an antenna are directly related to its dimensions in relation to the wavelength, the aim is to keep the overall size of the antenna constant and from there, find the geometry and structure that give the best performance. The design and bandwidth optimization of a Planar Inverted-F Antenna (PIFA) were introduced in order to achieve a larger bandwidth in the 2 GHz band, using two optimization techniques based upon genetic algorithms (GA), namely the Binary Coded GA (BCGA) and Real-Coded GA (RCGA). During the optimization process, the different PIFA models were evaluated using the finite-difference time domain (FDTD) method-a technique belonging to the general class of differential time domain numerical modeling methods.     

Optimal Predictive Impedance Control in the Presence of Uncertainty for a Lower Limb Rehabilitation Robot

As an innovative concept, an optimal predictive impedance controller(OPIC) is introduced here to control a lower limb rehabilitation robot(LLRR) in the presence of uncertainty. The desired impedance law is considered to propose a conventional model-based impedance controller for the LLRR. However, external disturbances, model imperfection, and parameters uncertainties reduce the performance of the controller in practice. In order to cope with these uncertainties, an optimal predictive compensator is introduced as a solution for a proposed convex optimization problem, which is performed on a forward finite-length horizon. As a result, the LLRR has the desired behavior even in an uncertain environment. The performance and efficiency of the proposed controller are verified by the simulation results.     

Solar and lunar observations at Istanbul in the 1570s

From the early ninth century until about eight centuries later, the Middle East witnessed a series of both simple and systematic astronomical observations for the purpose of testing contemporary astronomical tables and deriving the fundamental solar, lunar, and planetary parameters. Of them, the extensive observations of lunar eclipses available before 1000 AD for testing the ephemeredes computed from the astronomical tables are in a relatively sharp contrast to the twelve lunar observations that are pertained to the four extant accounts of the measurements of the basic parameters of Ptolemaic lunar model. The last of them are Taqī al-Dīn Mu?ammad b. Ma‘rūf’s (1526–1585) trio of lunar eclipses observed from Istanbul, Cairo, and Thessalonica in 1576–1577 and documented in chapter 2 of book 5 of his famous work, Sidrat muntaha al-afkar fī malakūt al-falak al-dawwār (The Lotus Tree in the Seventh Heaven of Reflection). In this article, we provide a detailed analysis of the accuracy of his solar (1577–1579) and lunar observations.     

Prediction of α‐stable GARCH and ARMA‐GARCH‐M models

The best prediction of generalized autoregressive conditional heteroskedasticity (GARCH) models with α‐stable innovations, α‐stable power‐GARCH models and autoregressive moving average (ARMA) models with GARCH in mean effects (ARMA‐GARCH‐M) are proposed. We present a sufficient condition for stationarity of α‐stable GARCH models. The prediction methods are easy to implement in practice. The proposed prediction methods are applied for predicting future values of the daily SP500 stock market and wind speed data.     

The FN3 and BRCT motifs in the exomer component Chs5p define a conserved module that is necessary and sufficient for its function

Chs5p is a component of the exomer, a coat complex required to transport the chitin synthase Chs3p from the trans-Golgi network to the plasma membrane. The Chs5p N-terminal region exhibits fibronectin type III (FN3) and BRCT domains. FN3 domains are present in proteins that mediate adhesion processes, whereas BRCT domains are involved in DNA repair. Several fungi—including Schizosaccharomyces pombe, which has no detectable amounts of chitin—have proteins similar to Chs5p. Here we show that the FN3 and BRCT motifs in Chs5p behave as a module that is necessary and sufficient for Chs5p localization and for cargo delivery. The N-terminal regions of S. cerevisiae Chs5p and S. pombe Cfr1p are interchangeable in terms of Golgi localization, but not in terms of exomer assembly, showing that the conserved function of this module is protein retention in this organelle and that the interaction between the exomer components is organism-specific.     

tRNA splicing endonuclease mutations cause pontocerebellar hypoplasia

Pontocerebellar hypoplasias (PCH) represent a group of neurodegenerative autosomal recessive disorders with prenatal onset, atrophy or hypoplasia of the cerebellum, hypoplasia of the ventral pons, microcephaly, variable neocortical atrophy and severe mental and motor impairments. In two subtypes, PCH2 and PCH4, we identified mutations in three of the four different subunits of the tRNA-splicing endonuclease complex. Our findings point to RNA processing as a new basic cellular impairment in neurological disorders.     

Aging behavior of a copper-bearing high-strength low-carbon steel

The effects of aging temperature and time on the hardness and impact toughness of a copper-bearing high-strength low-carbon steel were investigated. The hardness of the aged samples reached maxima after 1 h and 5 h of aging at 500 and 450℃, respectively; this increase in hardness was followed by a decrease in hardness until a temperature of 700℃, at which secondary hardening was observed. The impact toughness of the aged steel was found to be higher for 5 h of aging. Transmission electron microscopy confirmed the presence of carbide and copper precipitates; also, the secondary hardening could be the result of the transformation of austenite (formed in the aging treatment) to martensite. Differential scanning calorimetry of the steel was performed to better understand the precipitation behavior. The results revealed that the precipitation of the steel exhibited two significant stages of copper precipitate nucleation and coarsening of the precipitates, with corresponding activation energies of 49 and 238 kJ·mol-1, respectively.