Effect of Mg substitution for La on microstructure, hydrogen storage and electrochemical properties of La1−xMgxNi3.5 (x=0.20, 0.23, 0.25 at%) alloys

The effect of Mg substitution for La on microstructure, hydrogen storage and electrochemical properties of the annealed La_(1-x) Mg_x Ni_3.5(x=0.20, 0.23, 0.25 at%) alloys have been studied. All the samples were mainly composed of(LaMg)_2Ni_7,(LaMg)Ni_3, and LaNi_5 phases. Mg substitution for La changed the phase abundance, but did not change the constitution of all phases, which is con fi rmed by the results of backscattered SEM images and EDS analysis. The P–C isotherms indicated that the La_(1-x) Mg_x Ni_3.5alloys reversibly absorbed and desorbed hydrogen smoothly at 298 K. The hydrogen absorption cyclic stabilities of La_(1-x) Mg_x Ni_3.5alloy after 5 hydrogen absorption/desorption cycles reached the maximum values of91.9% and 96.0% at 298 K and 323 K, respectively. The hydrogen desorption capacity and plateau pressure for the La_(1-x) Mg_x Ni_3.5alloy reached the maximum values of 1.055 H/M and 0.074 MPa, respectively. The desorption capacities of La_(1-x) Mg_x Ni_3.5reached 0.193 H/M and 0.565 H/M in the fi rst minute at 298 K and 323 K, respectively. Electrochemical property measurement indicated that La_(1-x) Mg_x Ni_3.5(x=0.20,0.23, 0.25 at%) alloys possessed excellent activation capability and were completely activated within3 cycles. Discharge capacities of La_(1-x) Mg_x Ni_3.5alloys reached 378.2 m A h/g(x = 0.20 at%), 342.7 m A h/g(x = 0.23 at%), and 369.6 m A h/g(x = 0.25 at%), respectively. Moreover, energy density of La_(1-x) Mg_x Ni_3.5alloy was much larger than that of La_0.80Mg_0.20Ni_3.5 alloy and nearly approaches the maximum value of La0.75Mg0.25Ni3.5. Thus, the La_(1-x) Mg_x Ni_3.5alloy exhibits optimum comprehensive properties of hydrogen storage and electrochemistry.     

循环网络模拟技术在土石方工程中的应用

土石方工程由于施工过程的复杂及受到众多随机因素的影响,很难用人工方法精确计算各道路的行车及排队情况,确定各道路的等级以及施工机械设备的数量。采用循环网络模拟技术,用挖、装、运、卸等仿真节点来模拟实际施工的相应过程,建立能反映土石方实际开挖过程的仿真模型。仿真得出的一系列施工参数为辅助管理人员做出决策提供参考依据。某工程中的成功应用表明,此方法快捷、便利,值得深入研究并推广应用。     

太阳电池填充因子随日照强度变化的理论分析与计算

根据太阳电池直流模型和最大功率点数学条件,推出短路电流、开路电压、最大功率点电流和电压 以及填充因子随日照强度变化的数学关系式;并选取２个电池分别计算出在不同日照强度下上述电池参数随日 照强度的变化率。验证了短路电流和最大功率点电流是近似跟日照强度成正比,开路电压和最大功率点电压是 近似跟日照强度的自然对数成正比。并提出了填充因子随日照强度的变化关系不具有简单的函数形式,而对不 同的太阳电池其变化关系也迥异。最后用Multisim的模拟结果检验了理论分析计算的正确性。     

基于智能体模拟的结构性疏散计划设计研究

展示了一个基于Agent模拟方法的框架方法,用于为危急中的复杂技术系统设计结构性的疏散计划.该计划利用复杂自适应系统的模拟方式,并采用基于智能体模拟的方法作为认知工具来设计整体系统的疏散方案.结构化的疏散计划应用文中提出的整体性技术框架,没有采用标准化的常规方法.提出了一个使疏散人群能够更加适应的调整危机时刻的紧急情况和减少无效疏散的建议性方案.本框架方法在一个典型的复杂自适应系统一地铁火灾中得到应用.     

三维地学建模技术与Kriging方法在固体矿产储量计算中的应用

结合Kriging方法在计算机上的实现和应用,介绍了运用三维地学建模技术生成矿体的三维品位模型的原理流程以及关键技术,并在此基础上进行矿产资源储最计算.其基本流程为:根据实际地质勘探数据生成矿体三维实体模型;在实体tin模型内部应用块模型方法进行划分,建立矿体块体模型;利用Kriging方法进行插值,生成矿体的品位模型...     

施工企业防范经营风险初探

施工企业经营风险是指企业在经营中对未来经营环境中的不确定因素与多变性无法全部或精确预测所造成预计支出与收益偏离实际的风险。企业经营风险是在经营过程中产生的,因此,经营风险贯穿于企业生产经营的全过程。     

Lipids of sulfate-reducing bacteria and sulfur-oxidizing bacteria found in the Dongsheng uranium deposit

U-bearing sandstones from the Dongsheng deposit in Ordos Basin contain abundant C15-C18 fatty acids. The fatty acids may have been derived from modern and ancient organisms including organisms from the intervals of U mineralization. A certain amount of i15:0, a15:0, a17:0 fatty acids coexist with small amounts of i17:1ω7c and 10me16:0, characteristic biomarkers of Desulfovibrio and Desulfobacter sp., respectively. This indicates the existence of sulfate-reducing bacteria (SRB) in the sandstones. The presence of sulfur-oxidizing bacteria (SOB), such as Beggiatoa and Thioploca, is indicated by significant amounts of 16:1ω7c and 18:1ω7c fatty acids. The existence of the SRB in the deposit, as inferred from the fatty acids, is consistent with results from fossilized microorganisms and isotopic compositions of ore-stage pyrite. This suggests that the environment may have been favorable for the SRB to grow since ore formation (9.8-22 Ma). The bacteria may have degraded hydrocarbons directly, or indirectly utilized hydrocarbons degraded by oxic microbes in the deposits. This process may have produced 12C-rich calcite and prominent baseline humps of unresolved complex mixtures (UCM), and 25-demethylated hopanes and tricyclic terpanes. The existence of sulfur-oxidizing bacteria and sulfate-reducing bacteria in the deposit may have resulted in bacterial sulfate reduction to sulfide, re-oxidization of the sulfide to sulfate and subsequent reduction of the sulfate to sulfide. This assertion is supported by ore-stage pyrite with δ34S values as low as-39.2‰, and the lightest sulfate (about 11‰) measured during the Phanerozoic, a difference of more than 46‰.     

掘进机电气系统结构及故障判断

文章论述了掘进机电气系统所采用的控制方式以及保护方式,结合掘进机电气系统原理,提出电气系统故障点分布,进行分析,使维修人员能够快捷地判断和处理故障。     

Man-machine interface in tunneling applications in the electrical control system

文章介绍了人机界面的性能、参数,并分析了其在掘进机中的应用和在提高电气系统性能上的重要作用.     

Photocatalytic activity of TiO<Subscript>2</Subscript> sensitized by CdS quantum dots under visible-light irradiation

In this paper, CdS quantum dots sensitized TiO2 composite powders (QD-CdS/TiO2) were synthesized by impregnating TiO2 powder into CdS sol with different concentrations. X-ray diffraction pattern (XRD) shows the crystal structures of CdS and TiO2 are cubic phase and anatase phase separately in QD- CdS/TiO2 powder samples; the crystal size of CdS in QD- CdS/TiO2 is about 3-7 nm, while TiO2 crystal size is about 20 nm. With increasing CdS content in QD-CdS/TiO2 composite, the UV-Vis absorption spectrum shifted to the longer wavelength lines, exhibiting obvious quantum size effect. The fluorescence intensity of QD-CdS/TiO2 irradiated by blue light is weaker than that of pure CdS. When the molar ratio of CdS and TiO2 is about 1∶2, the QD-CdS/TiO2 powder has the best catalytic properties under visible-light irradiation, and the degradation rate of rhodamine B (RhB) is up to 92.2% within 60 min.