Near-MDR codes over Z 4

In this paper, we define near-MDR （maximum distance with respect to rank） codes over the ring Z4 and prove that a linear code C over Z4 is near-MDR if and only if the torsion codes Tor（C）is near-MDS. Finally, the generator matrices of all near-MDR codes over Z4 are given.     

PAS-300分散控制系统在国电电力大同二电厂脱硫系统中的应用

文章主要介绍了PAS-300分散控制系统在国电电力大同二电厂脱硫系统中的应用,进行了系统可靠性分析,为脱硫DCS国产化设计提供了参考和借鉴.     

黄嘌呤氧化酶微型生物传感器及其应用的研究

该文利用Ｎａｆｉｏｎ和电化学聚合苯酚（ＰＰｈ）复合膜将黄嘌呤氧化酶（ＸＯＤ）成功地固定在碳纤维微电极上，制成黄嘌呤氧化酶微型传感器。在５．０×１０－５～１．８×１０－３ｍｏｌ／Ｌ范围内次黄嘌呤浓度与传感器的电流响应呈线性关系，相关系数为０．９９９０。该传感器具有灵敏度高，抗干扰能力强，使用寿命长等特点。传感器用于心肌细胞缺血性损伤过程中胞外次黄嘌呤的测定，结果满意。     

关于智能液位测控仪的方案设计

本文介绍了以AT89C54-单片机为核心构成的智能液位测控仪的组成、原理及硬、软件设计方案,其中针对程序跑飞问题提出了一个特殊解决方法.     

A detection method for logic functions suitable for dual-logic synthesis

Logic functions can be implemented in either AND/OR/NOT-based traditional Boolean (TB) logic or AND/XOR-based Reed–Muller (RM) logic. To the majority of logic functions, it will be beneficial to be partially implemented in both TB logic and RM logic, called dual-logic. In this paper, a detection condition favoring dual-logic synthesis is proposed. A corresponding detection algorithm is developed and implemented in C. The algorithm is applied to test a set of MCNC91 benchmarks for verifying the algorithm. The results show that the proposed algorithm is more efficient than published ones.     

LPS致大鼠肺泡Ⅱ型细胞凋亡及对Fas抗原表达的影响

探讨Ｆａｓ信号通路在肺泡Ⅱ型细胞损伤作用的可能机制及意义．建立大鼠肺泡Ⅱ型细胞体外培养，采用流式细胞术、原位杂交、逆转录、多聚酶链式反应等方法，观察大肠杆菌内毒素（ＬＰＳ）对肺泡Ⅱ型细胞ＦａｓｍＲＮＡ、蛋白质及细胞凋亡的影响．成功建立大鼠肺泡Ⅱ型细胞体外培养技术，ＬＰＳ刺激后，肺泡Ⅱ型细胞ＦａｓｍＲＮＡ、蛋白质表达均显著增加（Ｐ＜０．０１），ＬＰＳ可诱导肺泡Ⅱ型细胞凋亡，并在一定范围内呈量－效关系，表明ＬＰＳ对肺泡上皮的损伤效应，除直接损伤作用外，还可能通过诱导Ｆａｓ抗原表达增加，而致细胞凋亡的方式进行     

铜单一元素合金化热轧钢板的组织与性能

研究了铜单一合金化高纯净热轧钢板在时效退火前后的组织与性质的关系，结果表明，铜具有明显的时效强化作用，在时效过程中铜的析出优先于钢板的再结晶，同时高纯净化体使风材保持了良好的塑性，分析表明，铜单一合金化高纯净钢具有良好的发展前景。     

Weighted joint calibration for interferometric SAR

Calibration is a processing procedure for across-track interferometric synthetic aperture radar （InSAR） to achieve an accurate three-dimensional location. A calibration technique, called weighted joint calibration, for the generation of wide-area geocoded digital elevation models （DEMs） is proposed. It cali- brates multiple InSAR scenes simultaneously, and allows reducing the number of required ground control points （GCPs） by using tie points （TPs）. This approach may ensure the continuity of three- dimensional location among adjacent scenes, which is necessary for mosaic and fusion of data coming from different scenes. In addition, it introduces weights to calibration to discriminate GCPs and TPs with different coherences and locations. This paper presents the principles and methodology of this weighted joint calibration technique and illustrates its successful application in airborne In- SAR data.     

《冲压工艺与模具设计》课程教学改革探索与实践

为适应应用型人才培养的目标要求,根据《冲压工艺与模具设计》课程的特点,对该门课程的教学进行深入思考与探索,优化教学内容、加强教材建设与实践教学、改革教学方法与手段,以提高教学质量.