粉末冶金陶瓷模工艺中的快速脱蜡新技术

粉末冶金陶瓷模工艺是一种先进的过净形成形工艺．本文报道该工艺中一种新的脱蜡技术．采用快速加热、管径集中热量和定向导热传热综合方法，在陶瓷模和大部分蜡模材料处于较低温度下，使蜡模材料来不及发生显著的热膨胀而直接蒸发，得到脱蜡干净、外形完整的陶瓷模．     

中水回用前景及其实际意义

概述了中水及中水回用的概念,分析了目前中水回用中存在的问题,探讨了水源热泵技术的应用。     

High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

在Triton X—100存在下,用2-(5-溴-2-吡啶偶氮)-5-二乙胺基苯酚(5-Br-PADAP)分光光度测定方钍石中的钍

方钍石是钍来源的重要含钍矿物。目前测定钍的含量的方法较多,虽有用5-Br-PADAP测定钍的方法的报导,但未见有在triton X-100存在下,用5-Br-PADAP直接测定方钍石中钍的含量的报导。Triton X-100的存在,使测定的酸度增加,从而增加干扰元素的干扰比;并且增加了络合物的稳定时间。本文采用5-Br-PADAP作显色剂,在氯乙酸-氯乙酸钠缓冲体系中用triton X-100表面活性剂胶束增溶分光光度测定方钍石(人工样品)中钍的含量,获得较满意的结果。在25毫升中,钍的比耳定律范围在0～20微克,摩尔吸光系数为5.2×10~4升·摩尔~(-1)·厘米~(-1),Sandell灵敏度为0.0045微克钍(IV)/厘米~2。我们对两种含量的方钍石人工样品进行了测试,结果良好,回收率在97.3～101.4％之间,此方法可靠,精密度较高,误差符合微量组分的测定要求,我们对样品测定结果表示满意。     

A New Shaping Model for Green Ceramic Balls

The shaping quality of green ceramic balls is directly related to the efficiency and cost of later machining for the ceramic balls. Until now the shaping for green ceramic balls is still conducted by handwork. In this paper, a new shaping model for green ceramic balls was designed. In the new model, two grinding wheels with the same generator line as circular arc are mounted on symmetry, and their axes are parallel. The green ball can be put in the enveloping space formed by the two grinding wheels. The rad...     

袋装砂井施工工艺及质量控制

介绍了广肇高速公路1-B标段软基处理中的袋装砂井施工工艺与工程质量控制,并列出了部份监测结果.     

Finesse 全瓷冠适合性的体外实验研究

目的 :测量Finesse全瓷冠的边缘浮出量及粘固剂的厚度 ,并与金属全冠及金瓷全冠相比较 ,为Finesse全瓷冠的临床应用提供适合性方面的理论依据。方法 :用片切法测量 3组全冠粘固前、后边缘浮出量及粘固剂的厚度。结果 :Finesse全瓷冠粘固前、后的边缘浮出量分别为 (37 6 1± 9 13) μm、(6 5 85± 15 11) μm ,粘固剂厚度为 (40 84± 9 73) μm ,与金属全冠及金瓷全冠相比较 ,均无显著性差异 ;3组全冠粘固前和粘固后的边缘浮出量有显著性差异。结论 :Finesse全瓷冠适合性良好 ,完全可为临床应用 ;粘接对全冠修复体的边缘浮出量有影响。     

Study on Ceramic Cutting by Plasma Arc

Engineering ceramics are typical difficult-to-machine materials because of high hardness and brittleness. PAC (Plasma Arc Cutting) is a very important thermal cutting process and has been successfully used in cutting stainless steel and other difficult-to-machine alloys. PAC‘s application in cutting ceramics, however, is still limited because the most ceramics are not good electronic conducts, and transferred plasma arc cannot be produced between cathode and work-piece. So we presented a method of plasma ...     

浅埋煤层开采中的溃沙灾害研究

分析了浅埋煤层开采的水文条件和工程地质条件，得出了浅埋煤层发生渍沙灾害必须具备的4个条件；根据浅埋煤层中组合关键层的一些参数分析了老顶破断岩块的运动规律，判断了浅埋煤层开采中岩块是否发生回转失稳，探讨了岩块回转触矸后发生滑落失稳的可能性，计算了断裂岩块端角接触面高度，得出了满足裂隙滤沙的合理端角接触面高度；大柳塔1203工作面开采只发生了涌水而未溃沙，这和理论计算的结论基本一致．参8．