首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 93 毫秒
1.
Recent development of a high-performance narrowband high-temperature superconducting (HTS) filter is presented. A 10-pole quasi-elliptic function response filter with two pairs of transmission zeros (for high selectivity), which has a center frequency of 2.185 GHz and a 3 dB bandwidth of 10 MHz (a fractional bandwidth of 0.45%), is introduced. The filter was fabricated on a 40 mm×16 mm×0.5 mm MgO wafer with double-sided YBCO films. The measured results show that the filter has 0.15 dB insertion loss at the ...  相似文献   

2.
Matched filter is one of the key technologies to achieve high-speed data transmission. In this paper,a parallel finite-impulse response (FIR) filter structure based on polyphase filter-ing is used to achieve high-speed matched filter in quadrature phase-shift keying (QPSK) demodulation up to 800 Mb·s-1. First,a window function is employed of to obtain impulse response of matched filter. Second,the high-speed parallel FIR structure is presented based on polyphase filtering. Then,the filter with EP2S180F1020 on the Quartus II 7.2 platform is achieved. The final results show that the design is correct and can implement high-speed matched filtering,wherein the equivalent frequency of which is up to 2 037 MHz. In addition,this scheme is easy to real-ize,which brings great value to the application of this filter in high-speed matched filters design in demodulation systems.  相似文献   

3.
A simple delay-predictive continuous-time generalized predictive controller with filter (F - SDCGPC) is proposed. By using modified predictive output signal and cost function, the delay compensator is incorporated in the control law with observer structure, and a filter is added for enhancing robustness. The design of filter does not affect the nominal set-point response, and it is more flexible than the design of observer polynomial. The analysis and simulation results show that the F - SDCGPC has better robustness than the observer structure without filter when large time-delay error is considered.  相似文献   

4.
On YBCO/LaAIO3/YBCO substrate with the dimension of 10 mm x 20 mm, a miniature HTSC (high temperature superconductivity) bandpass filter with multi-zigzag line structure is developed. At 77 K, the center frequency is 1.2 GHz, the bandwidth is 50 MHz, and the insertion lossis 0.12 dB.  相似文献   

5.
A synthesized design method is proposed to design microstrip band-pass filters. The impact of the box structure to the filter performance is considered besides the structure of microstrip. An X-band high temperature superconducting (HTS) microstrip filter for deep space network is designed using this method. The six-pole microstrip band-pass filter at frequency of 9500 ± 500 MHz is realized using TBCCO HTS thin film grown on 0.5 mm thick LaAlO3 substrate. The filter shows very high rejection of 90 dB in the...  相似文献   

6.
In this paper, a dual-band notch filter for two-layer frequency selective surface (FSS) at terahertz (THz) frequency with high fil- tering performance has been realized on high-resistivity silicon substrates. With periodic metallic resonators patterned on the sili- con wafer, the designed filter can provide two tunable resonant frequencies for terahertz application. The transmission response was improved by introducing an extra surrounding pattern around the T-shaped structure, and the location of transmission drop was tuned independently with geometric parameters. Simulated by finite-integral time-domain method, the filter is designed to operate between 0.2 and 0.6 THz with dual-band band-stop performance, a salient feature of this design is making the low sensi- tivity of its frequency response to the incident angles, which allows to place the filter close to the radiation source with spherical wave fronts. The proposed structures were fabricated using photolithography and tested by THz time-domain spectroscopy system Experimental results show that the transmission response has more than 12 and 32 dB rejections near 285 and 460 GHz respectively, which is in good agreement with the simulation result.  相似文献   

7.
Development of miniature HTSC wide-band filter with open-loop resonators   总被引:1,自引:0,他引:1  
The strong electric and magnetic coupled novel HTSC (high temperature superconductor) open-loop microstrip resonators are studied in this report and the traditional structure of open-loop resonators is improved. A miniature wide-band HTSC bandpass filter is developed by the novel structure, which is fabricated on YBCO/LaAIO3/YBCO substrate with dimensions of 14.8×9.6 mm^2. This filter is tested at 77 K, and the specifications are that the center frequency is 2230 MHz, the bandwidth is 455 MHz, and the best insertion loss is 0.14 dB in passband.  相似文献   

8.
The most common typical bulk acoustic wave (BAW) filters are fabricated using bulk micromachining technology, but they have several disadvantages. This paper describes a new structure for front end passband BAW filters manufactured using surface micromachining. Porous silicon is used as a thick sacrificial layer. The structure reduces the influence of the support film on the filter to improve the VLSI compatibility as well as the filter quality. The cross-talk between resonators with different frequencies can be dramatically reduced by using resonators with a self-supporting structure.  相似文献   

9.
In the design of nonuniform filter banks (NUFBs) with direct structure, the location of each analysis filter, corresponding to the sampling factor satisfying maximal decimation condition, should be set properly to avoid large aliasing. In this paper, a necessary and sufficient condition for the setting of the location of each analysis filter is derived. The NUFBs, we focus on, have rational decimation factors. Based on the derived condition, the frequency support of each analysis filter for the realizable NUFBs can be determined directly in such a way that the analysis filters can extract the corresponding bands of the input signal. This provides a guideline for the design of NUFBs with direct structure in choosing proper locations of analysis filters.  相似文献   

10.
Directional speech enhancement of signals from microphone arrays is an effective way to improve speech recognition for cochlear implant users.The strict implant size limitation results in a short distance between microphones.The fractional delay problem due to the short distance between microphones is solved by a maximal flat (Maxflat) finite impulse response (FIR) filter,using the Maxflat error criteria at a low frequency containing most of the speech information and energy.The fractional Maxflat FIR filter approximates the ideal digital fractional filter at the magnitude response,phase response,and phase delay characteristics,and is also very low order.The results demonstrate that the Maxflat FIR filter accurately and effectively solves the fractional digital delay and is very suitable for real-time speech processing in practical cochlear implant products.  相似文献   

11.
So far, the only Ca magneto-optic atomic filters reported are based on a heated Ca cell, and the transmission spectrum obtained is double-peaked with 3 GHz effective passband limited by Doppler broadening. A magneto-optic atomic filter with single-peaked transmission spectrum of sub-Doppler bandwidth based on the thermal Ca atomic beam is firstly experimentally demonstrated. The fast Ca dipole transition(1S0–1P1) at 422.7 nm, which matches a strong solar Fraunhofer line, was utilized. A folded ninebeam traveling wave configuration is employed, and the maximum transmission efficiency is measured to be 7.3 %.A sub-Doppler transmission bandwidth of 590 MHz, much narrower than the 2.2 GHz Doppler width in the heated atomic cell, is obtained for the first time.  相似文献   

12.
本文研究了一种基于阶梯阻抗谐振器(SIR)和缺陷馈电结构的小型双频带通滤波器(BPF).具有T型中央加载的SIR可以更自由地调整双频谐振频率,SIR和缺陷馈电结构组合,并进行阶数调整,可以很容易控制绝对带宽,仿真得到传输零点.最后,仿真结果显示,恒定绝对带宽在230MHz±5.6%的情况下,第二通带可以在1.55GHz,1.75GHz和2.05GHz之间切换,恒定绝对带宽为32MHz的情况下,第一通带稳定在0.90GHz.实际加工的滤波器测量结果与仿真结果吻合较好.  相似文献   

13.
采用低温烧结电磁复合材料作基板,基于LTCC技术制备多层片式电感、电容及抗EMI低通滤波器,利用ADS软件和HFSS软件对低通滤波器进行电路仿真和三维结构仿真,设计出封装尺寸为0805型,截止频率为50 MHz,带内纹波小于0.5 dB,100 MHz处衰减大于20 dB的LTCC低通滤波器。  相似文献   

14.
文章中利用基片集成波导和双模滤波器两种技术,对基片集成波导双模带通滤波器的设计进行了研究,设计了一种微波带通滤波器结构,该滤波器结构简单,无载品质因数高达9000.应用凹型过渡结构,使基片集成波导与微带线的过渡问题得到很好解决,使基片集成波导双模带通滤波器便于集成.设计的滤波器中心频率在5.61GHz,通过TE102和TE201两种模式耦合,形成一个传输零点,改善了滤波器的性能,通带内反射损耗S11优于24dB,3dB带宽达50MHz.  相似文献   

15.
窗函数法设计的FIR滤波器已被广泛应用,但滤波器边界频率不易精确控制,不能分别控制通带与阻带的纹波幅度,在阻带边界频率附近的衰减最小。采用神经网络算法使所设计滤波器频响与理想频响之间的全局误差在通带与阻带内最小,使通带阻带无波动无过冲,阻带有更大的衰减,通带与阻带的边界频率容易控制。采用以上方法设计了一低通滤波器并在TMS320C5402 DSP上进行了实验,实验结果验证了算法的可行性,并改善了滤波器的性能。  相似文献   

16.
在传统1/4波长阶跃阻抗谐振器(step impedance resonator,SIR)的基础上,提出一种新型双频宽带带通滤波器(bandpass filter,BPF)的结构及其设计方法,其中心频率为1.90/5.65 GHz,可工作于GSM等无线通信系统中.该滤波器频率覆盖范围广,带宽宽,其第一频段的绝对带宽为980 MHz,第二频段的绝对带宽为960 MHz.该滤波器在基频1.90 GHz的回波损耗低于-25 dB,插入损耗为-0.012 dB.同时,滤波器的两通带隔离度好,结构简单,易于加工.频率响应特性S11和S21的电磁仿真和实测结果非常吻合.  相似文献   

17.
缪古  屈德新  杜立航 《科技信息》2010,(35):I0101-I0102
本文提出了一种具有高阻带特性的超宽带滤波器。并联短路支节超宽带滤波器存在上阻带频率范围过窄的问题,为了改善其的带外抑制性能,本文设计了一种紧凑的级联结构超宽带滤波器,在不明显增大滤波器尺寸的条件下,有效拓宽对其上阻带频率范围。优化设计后,得到了一个通带频段为2.1~10.2GHz,上阻带达18.5GHz的超宽带滤波器。仿真结果表明,该结构具有良好的带内带外特性。该滤波器结构简单,尺寸紧凑,适于实际应用。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号