稀土氧化物在复合PSZ材料中的作用

复合稳定ＺｒＯ２在高温热处理过程中,发生立方相向四方相的相变,由于Ｙ２Ｏ３或Ｃｅ２Ｏ３和ＭｇＯ的复合稳定作用,相变过程产生大量介稳的ｔ－ＺｒＯ２析出体。可相变四方相含量随热处理时间而增加,其中外２ｍｏｌ％Ｙ２Ｏ３的（Ｙ,Ｍｇ）－ＰＳＺ／ＭｇＡｌ２Ｏ４材料处理至８００ｈ仍未降低。热处理过程中Ｙ２Ｏ３和Ｃｅ２Ｏ３始终存在于晶格中稳定ＺｒＯ２．复合稳定剂充分体现了对立方和四方相的稳定作用,多元ＰＳＺ的稳     

1000℃MgO—B2O3—SiO2三元相关系研究

ＭｇＯ－Ｂ２Ｏ３－ＳｉＯ２三元系１０００℃时，３５％≤ＭｇＯ％〈６０％组成范围内平衡相均为固相，其相关系可由Ｍｇ３Ｂ２Ｏ６－Ｍｇ２ＳｉＯ４－Ｍｇ２Ｂ２Ｏ５，Ｍｇ２Ｂ２Ｏ５－Ｍｇ２ＳｉＯ４－ＭｇＳｉＯ３，Ｍｇ２Ｂ２Ｏ５－ＭｇＳｉＯ３－ＳｉＯ２三个结线三角形表示。各平衡相量之间关系可应用ＸＲＤ定量相分析或重心规则计算。     

Ba和Mg掺杂对Bi（Pb）—Sr—Ca—Cu—O超导性能的影响

采用固态反应法制备了名义组分为Ｂｉ１．８Ｐｂ０．２Ｓｒ２Ｃａ２Ｃｕ３Ｏｘ和Ｂｉ０．９Ｐｂ０．１Ｂａ０．１Ｍｇ０．１Ｓｒ０．８ＣａＣｕ２Ｏｘ超导样品，并研究了Ｂａ，Ｍｇ掺杂对Ｂｉ系超导性能的影响。用Ｘ射线衍射及电阻－温度关系的测量获得的实验结果表明，添加Ｂａ和Ｍｇ元素可以有效地抑制Ｂｉ系２２１２相的生成，促进２２２３相的形成，并能提高超导材料的Ｔｃ。     

Si3N4-MgO-CeO2陶瓷烧结过程中的致密化与相变

氮化硅陶瓷有极大的应用潜力,但由于其强共价键,很难烧结致密化。采用了一种新的ＭｇＯ－ＣｅＯ２复合烧结助剂,利用Ｘ射线衍射、透射电镜等手段研究了ＭｇＯ－ＣｅＯ２复合烧结助剂对氮化硅陶瓷致密化和相变过程的影响,结果发现对Ｓｉ３Ｎ４－ＭｇＯ－ＣｅＯ２陶瓷,在１４５０℃就会有大量液相出现,１５００～１５５０℃为快速致密化阶段,而α－Ｓｉ３Ｎ４→β－Ｓｉ３Ｎ４相变主要发生在１５５０～１６００℃,相变过程滞后于致密化过程。常压烧结Ｓｉ３Ｎ４－ＭｇＯ－ＣｅＯ２陶瓷,强度达９４８ＭＰａ,因此,ＭｇＯ－ＣｅＯ２是一种非常有效的氮化硅的烧结助剂。     

Ba和Mg掺杂对Bi（Pb）－Sr－Ca－Cu－O超导性能的影响

采用固态反应法制备了名义组分为Ｂｉ１．８Ｐｂ０．２Ｓｒ２Ｃａ２Ｃｕ３Ｏｘ和Ｂｉ０．９Ｐｂ０．１Ｂａ０．１Ｍｇ０．１Ｓｒ０．８ＣａＣｕ２Ｏｘ超导样品，并研究了Ｂａ、Ｍｇ掺杂对Ｂｉ系超导性能的影响。用ｘ射线衍射及电阻－温度关系的测量获得的实验结果表明，添加Ｂａ和Ｍｇ元素可以有效地抑制Ｂｉ系２２１２相的生成，促进２２２３相的形成，并能提高超导材料的Ｔｃ．     

氟金云母可切削玻璃陶瓷的研究

本文选定Ｋ２Ｏ－ＭｇＯ－Ａｌ２Ｏ３－Ｂ２Ｏ３－ＳｉＯ２－Ｆ系统为成分设计基础，制备出氟金云母为主晶相的可切削玻璃陶瓷，弯曲强度σｂ＝１６０ＭＰａ，断裂韧性ＫＩＣ＝２．１ＭＰａ·ｍ１２．组织特征为相互交错的云母晶体。     

Si_3N_4－MgO－CeO_2陶瓷烧结过程中MgO的自动析晶

作者首次发现了Ｓｉ３Ｎ４－ＭｇＯ－ＣｅＯ２系陶瓷在烧结过程中玻璃相自动析晶这一独特现象．对于Ｓｉ３Ｎ４－ＭｇＯ－ＣｅＯ２系陶瓷在１４５０℃，ＭｇＯ－ＣｅＯ２就会与Ｓｉ３Ｎ４颗粒表面的ＳｉＯ２反应形成硅酸盐液相，冷却后则成为玻璃相保留在烧结体中；当烧结温度高于１５５０℃时，作者发现，ＣｅＯ２仍留在玻璃相中，但ＭｇＯ会自动析晶出来，其结果是大大减少了烧结体中严重影响其高温性能的玻璃相的含量，对于提高烧结氮化硅陶瓷的高温性能有重要作用     

Al_2O_3／nano－SiC复相陶瓷力学性能及显微结构

研究了热压烧结Ａｌ２Ｏ３／ｎａｎｏ－ＳｉＣ复相陶瓷的力学性能及显微结构。研究表明,纳米ＳｉＣ的引入显著地改善了材料的力学性能,在ＳｉＣ添加体积分数为１０％时,Ａｌ２Ｏ３／ｎａｎｏ－ＳｉＣ复相陶瓷抗弯强度σｆ达峰值为８６９ＭＰａ,断裂韧性ＫＩｃ也达峰值为６．７ＭＰａ·ｍ０．５,比纯Ａｌ２Ｏ３基体材料分别提高１３８％和８１％。ＴＥＭ观察表明：纳米ＳｉＣ晶粒主要存在于Ａｌ２Ｏ３基体晶粒内部,形成独特的“晶内型”结构。当受外力作用时,既能因弥散的纳米颗粒诱发穿晶断裂,且穿晶断裂时,还能因晶内存在第二相颗粒而引起裂纹偏转,起到增强增韧作用。     

载体SiO_2表面修饰对钒基催化剂丙烷氧化脱氢催化性能的影响

用ＸＲＤ、Ｒａｍａｎ、ＦＴ－ＩＲ、５１Ｖ－ＮＭＲ、Ｐｙ－ＩＲ和ＴＰＲ－ＴＰＯ表征ＳｉＯ２或ＳｉＯ２上预负载ＭｇＯ后负载的钒氧化物催化剂体系．ＳｉＯ２上直接负载钒氧化物,在钒负载量约为５ｗｔ％Ｖ２Ｏ５时出现Ｖ２Ｏ５晶相,而预负载ＭｇＯ的在相同钒含量时则没有出现Ｖ２Ｏ５晶相,表明预负载ＭｇＯ促进了钒氧化物在载体表面的分散．预负载ＭｇＯ的催化剂的可还原性和其还原态活化气相氧的活性较低,有较好的丙烷氧化脱氢的丙烯选择性,同时又因有较强的表面酸性位,有利于对丙烷仲碳Ｃ－Ｈ键的活化,而能保持其较高的丙烷氧化脱氢活性．钒氧物种与载体形成Ｖ－Ｏ－Ｍｇ（Ｓｉ）桥键,该桥键氧可能是丙烷氧化脱氢的活性氧物种     

Bi系银基带材的制备微结构与性能的关系

采用分析纯原料进行粉末装管拉丝，然后用每道次变形量大于３０％的轧制工艺，经一次压制，在８２０～８８０℃之间非线性控制温度时间函数，总烧结时间少于１２０ｈ，制备出电流密度Ｊ＿ｃ（７７Ｋ，０Ｔ）大于３×１０￣４Ａ／ｃｍ￣２、波动范围在±２０％的高温超导Ｂｉ系银基带材，粉末装管后预抽真空处理和缓慢升温避免了长带材的起泡．ＤＴＡ研究表明，掺Ａｇ的带材降低了液相形成温度，提高了相分解温度，且使相变更易控制．ＳＥＭ显示非超导相为弥散细小的ＳｒＣａＣｕＯ。     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

On Tragic Consciousness In The Works By Ernest Hemingway

As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

Achieving Unusual States of Matter Under High Pressure

正The periodicity of the elements and the non-reactivity of the inner-shell electrons are two related principles of chemistry,rooted in the atomic shell structure.Within compounds,Group I elements,for example,invariably assume the+1 oxidation state,and their chemical properties differ completely from those of the p-block elements.These general rules govern our understanding of chemical structures and reactions.Using first principles calcula-     

Exchange-Correlation and Electronic Excitation Energies from Pairing Matrix Fluctuations

We have developed an adiabatic connection to formulate the ground-state exchange-correlation energy in terms of pairing matrix linear fluctuations.This formulation of the exchange-correlation energy opens a new channel for density functional approximations based on the many-body perturbation theory.We illustrate the potential of such approaches with an approximation based on the particle-particle Random Phase Approximation(pp-RPA).This re-     

Density Functional Theory for the Response of Periodic Systems to Electric Fields Based on the Vector Potential Approach

正The electronic and nuclear(structural/vibrational)response of 1D-3D nanoscale systems to electric fields gives rise to a host of optical,mechanical,spectral,etc.properties that are of high theoretical and applied interest.Due to the computational difficulty of treating such large systems it is convenient to model them as infinite and periodic(at least,in first approximation).The fundamental theoretical/computational problem in doing so is that     

On the Thermodynamic Limit for Responses to Static Electromagnetic Fields

For molecular systems,the quantum-mechanical treatment of their responses to static electromagnetic fields usually employs a scalar-potential treatment of the electric field and a vector-potential treatment of the magnetic field.Although the potential for each field separately is associated with the choice of an(unphysical)origin,the precise choice of the origin for the electrostatic field has little consequences for the results.This is different for the