金鱼精子头在卵细胞质中转化的超微结构研究

用透射电镜研究了金鱼卵子受精后起始阶段精子头在卵细胞质中的转化过程，结果表明：这种转化同样必须经精子核膜的崩解、原来高度致密的精子染色质的解聚与分散以及新的核膜（雄原核核膜）的形成。     

肾蕨颈卵器中轴列细胞发育的超微结构研究

利用电子显微镜对肾蕨颈卵器中的中轴列细胞发育进行了超微结构的研究．肾蕨颈卵器中轴列细胞由1个卵细胞、1个腹沟细胞和4个颈沟细胞组成．其中卵细胞是中轴列细胞中最重要的细胞．卯细胞在刚刚形成时,细胞核椭圆形,核仁明显,细胞中细胞器丰富,随着卵细胞的发育,卵细胞与周围细胞间形成分离腔,并在表面出现附加膜,同时核伸长呈新月形,形成核外折的结构．本文重点报道了卵细胞发育过程中附加膜、分离腔的形成以及细胞核和细胞器的形态与分布的变化,同时探讨了卵细胞的结构变化在受精过程中的重要作用．     

盐透析体外组装核小体及检测方法

核小体是构成真核生物染色质的基本结构单位,体内研究核小体及染色质结构受到诸多因素限制,体外重构核小体结构是研究与核小体及染色质结构相关课题的一种重要的方法手段.实验将ES1,CS1以及601DNA序列克隆到载体中,通过PCR大量扩增回收得到目的DNA条带,表达纯化了4种组蛋白且装配成组蛋白八聚体,在盐透析的条件下组装形成核小体结构,利用EB染色以及Biotin标记的方法分析检测了形成核小体的效率.结果显示,在盐透析的条件下,可以有效的组装形成核小体结构,而且随着组蛋白八聚体与DNA的比例增加,核小体的形成效率显著提高.本实验为核小体定位、染色质重塑及组蛋白变体等表观遗传学以及结构生物学领域的研究奠定一定的基础.     

盐透析体外组装核小体及检测方法

核小体是构成真核生物染色质的基本结构单位,体内研究核小体及染色质结构受到诸多因素限制,体外重构核小体结构是研究与核小体及染色质结构相关课题的一种重要的方法手段.实验将ES1,CS1以及601DNA序列克隆到载体中,通过PCR大量扩增回收得到目的DNA条带,表达纯化了4种组蛋白且装配成组蛋白八聚体,在盐透析的条件下组装形成核小体结构,利用EB染色以及Biotin标记的方法分析检测了形成核小体的效率.结果显示,在盐透析的条件下,可以有效的组装形成核小体结构,而且随着组蛋白八聚体与DNA的比例增加,核小体的形成效率显著提高.本实验为核小体定位、染色质重塑及组蛋白变体等表观遗传学以及结构生物学领域的研究奠定一定的基础.     

华美游仆虫大、小核的透射电镜和生化抽提-扫描电镜观察

应用透射电镜术和生化抽提扫描电镜术显示,华美游仆虫大核核膜表面形成孔状结构,并有相当数量的附着物;小核核膜表面也有孔状结构,但附着物较少.此外,非分裂期大核染色质凝缩排列形成染色质团,染色质团由染色质颗粒构成,各个染色质颗粒含有许多均质的染色质小体;大核DNA合成期间,大核复制带区的染色质团分解成染色质小体.据所得结果认为,染色质小体是构成游仆虫大核的基本结构单元;大、小核形态上的差异与其在无性生殖期间核、质间的功能活动及物质联系有关.     

僧帽牡蛎卵母细胞卵黄发生的超微结构研究

本文在亚显微的水平上研究僧帽牡蛎(Ostrea cucullata Born)卵母细胞卵黄发生及细胞器的演变规律。可能有高尔基复合体、线粒体、内质网和微吞饮泡四种细胞组分参与卵黄粒的形成。在积累卵黄物质中,卵母细胞的核膜看来凸出细胞质和凹陷入细胞核内,核孔的数目增加,孔径扩大。许多线粒体围绕在核周围,并与核膜接触。在卵母细胞核内观察到微管结构。所有这些似乎暗示着核质和细胞质之间的物质交换是很强烈的。     

基于微型机器人的显微注射系统设计与实验

针对传统显微注射操作中手动操作难度大、成本高等问题,设计了一种基于微型机器人的低成本显微注射系统.首先,介绍三自由度微型机器人、信号控制器和功率放大器的结构和设计原理.其次,分析机器人在平面和垂直方向的运动性能.在驱动信号100 Hz时,平面尺蠖式蠕动速度可达32.5μm/步;在驱动信号高于200 Hz时,步进分辨率小于5μm;垂直方向运动最大范围5 mm,最小分辨率达2μm,满足实际要求.最后,设计了显微针对插、虾卵细胞吸附固定实验和虾卵细胞注射实验,结果表明,本文方案操作简单、重复性强,显微注射成功率达88%.     

小鼠附睾精子的显微受精

目的：建立显微受精的方法,并探讨小鼠附睾精子在显微注射进入卵母细胞后的受精能力。方法：用显微注射法把小鼠附睾头和附睾尾精子注入卵母细胞的胞质内或卵周隙进行显微受精。结果：把单个附睾尾精子注入卵细胞质中,培养后１４个存活的卵细胞中,有５个卵裂为２－细胞期胚胎;将单个附睾头精子注入卵母细胞中,有２５个存活,其中９个受精发育为２－细胞期胚胎;将附睾尾精子注入卵周隙进行带下受精,３０个存活的卵细胞中有４个     

"克隆"的再认识

克隆是指无性繁殖系,理论基础是细胞的全能性,动物克隆大多是体细胞核与去核卵细胞融和后培育成克隆动物,它的意义是培养优良新品种,繁制濒危物种,治疗疾病等。但克隆不是复制,克隆人也有积极的一面。     

原核显微注射产生转基因绵羊胚胎

体外采集绵羊卵丘卵母细胞复合体,成熟培养24 h,经过体外受精培养17 h,比较高速离心对胚胎发育的影响;高速离心可以使黑色脂滴甩到一边从而使受精卵原核清晰可见.然后将绵羊乳腺特异表达人肝细胞再生增强因子和真核细胞表达增强绿色荧光蛋白(Enhanced Green fluorescence protein,EGFP)的载体DNA显微注射于绵羊受精卵雄原核中,并将异构胚在SOF液中发育培养.结果表明:高速离心组囊胚率低于对照组,但是没有显著性差异(P》0.05);显微注射外源基因2天后在激光共聚焦显微镜下可见荧光胚胎;PCR检测5个荧光胚胎均可见特异性条带.在原核显微注射生产转基因胚胎中,绿色荧光蛋白可作为标记基因进行早期胚胎筛选,为提高转基因动物移植效率奠定实验基础.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.