RACE理论研究及其在植物基因工程中的应用

cDNA末端快速扩增—RACE(rapid amplification of cDNA ends),是近年发展起来的快速有效的获得全长cDNA的途径之一。本文阐述了RACE的历史、技术原理、局限性以及新型的RACE技术,并且讨论了RACE技术在植物基因研究中的技术优势、应用现状和发展前景。     

单向聚合酶链式反应扩增法研究

cDNA的末端快速扩增（RACE）是获得全长cDNA的有效手段之一。本文论述了RACE技术的原理、方法和改进,并介绍了新型RACE技术。     

常规PCR与RACE结合法快速从cDNA文库中克隆基因

首先根据Fe(Ⅱ)-转运蛋白基因家族的保守区设计同源的常规PCR引物(F1，R1)，扩增出490bp的特异片段。然后根据RACE法原理，巧妙地设计3′RACE(F2)和5′RACE(R3)特异性引物，使两者既能分别与文库载体上的筛选扩增引物配对扩增cDNA 3′和5′末端序列，又能使扩增出的3′RACE和5′RACE产物序列有重叠部分；另外设计引物时还兼顾到使F2和R3也能配对，从而能对3′RACE和5′RACE扩增产物进行双特异性引物常规PCR鉴定。该方案不但能够直接根据序列鉴定3′RACE和5′RACE产物是否为同一基因序列，还能快捷地用常规PCR鉴定3′RACE和5′RACE扩增产物是否为特异性扩增，避免了对非特异性扩增产物的克隆测序等繁琐的鉴定过程，优化了基因克隆策略。最后根据拼读出的全长序列设计引物(F4，R4)扩增出完整编码区。应用该方法成功地从小金海棠缺铁处理的根系cDNA文库中克隆了Fe(Ⅱ)-转运蛋白基因的cDNA。说明该方案是一种从cDNA文库中克隆目的基因的快捷优化方法。     

一种cDNA—5′末端的克隆方法

应用脱氧核糖核苷酸末端转移酶（TDT）在cDNA 5′末端加同聚物尾的方法，通过延长加尾时间，改变加尾步骤，大大加强了加尾效率，使得在cDNA末端快速扩增技术（RACE）中应用TDT加尾法进一步获得mRNA的5′端成为一种行之有效的方法。     

甘蓝型油菜(Brassica napus)中一个未知功能蛋白基因的cDNA克隆

随着现代分子生物学的发展，许多物种，特别是拟南芥等模式生物的整个基因组序列以及其中一部分基因的功能已经比较清楚，但仍然存在大量功能未知的基因有待进一步研究,从已知片段出发，利用cDNA末端快速扩增（rapid amplification of cDNA ends，RACE）技术钓取基因全长，并结合生物信息学技术预测蛋白质结构，是研究未知基因功能的一种重要手段．     

黄蜀葵查尔酮合成酶基因AmCHS克隆及序列分析

从黄蜀葵(Abelmoschus manihot) 花瓣中通过简并引物克隆得到查尔酮合成酶基因cDNA 核心序列,根据核心序列设计特异引物,再应用5′RACE 和3′RACE 技术分别扩增该序列的5′末端和3′末端序列,最后通过序列拼接获得黄蜀葵查尔酮合成酶基因（AmCHS）cDNA全序列.序列分析结果表明AmCHS cDNA编码区长1170 bp,编码389个氨基酸。其氨基酸序列与其它已知高等植物CHS基因具有很高的同源性,并且包含了CHS 具有的活性位点和催化位点等保守性位点.     

黄蜀葵查尔酮合成酶基因AmCHS克隆及序列分析

从黄蜀葵(Abelmoschus manihot) 花瓣中通过简并引物克隆得到查尔酮合成酶基因cDNA 核心序列,根据核心序列设计特异引物,再应用5′RACE 和3′RACE 技术分别扩增该序列的5′末端和3′末端序列,最后通过序列拼接获得黄蜀葵查尔酮合成酶基因（AmCHS）cDNA全序列.序列分析结果表明AmCHS cDNA编码区长1170 bp,编码389个氨基酸.其氨基酸序列与其它已知高等植物CHS基因具有很高的同源性,并且包含了CHS具有的活性位点和催化位点等保守性位点.     

Rapid Amplification of 5‘ cDNA End of S.Liaotungensis Choline Monooxygenase Using Inverse PCR RACE

Based on part of a known cDNA sequence of Suaeda Liaotungensis choline monooxygenase the author successfully cloned the 5‘ cDNA end of Suaeda Lianotungensis choline monooxygenase using Inverse PCR RACE with a specially designed 5‘-phosphated RT primer and two pairs of specific inverse PCR primers.Compared with the anchored PCR RACE,inverse PCR RACE has bettter specificity and higher amplification.     

杨树抗杨四瘿螨相关基因的表达分析

采用抑制性消减杂交(suppression subtractive hybridization,SSH)技术,在构建杨四瘿螨诱导差异表达的抑制消减cDNA文库的基础上,通过RTPCR技术对候选基因进行了验证,其中有6条差异表达候选基因在4个时间点表达量有明显的增强。运用RACE(Rapid Amplification of cDNA Ends)技术克隆获得了一段全长2 053 bp的cDNA克隆,命名为PtWRKY,编码588个氨基酸。     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.