铈（Ⅳ）-罗丹明6G化学发光体系测定中药清咽片中没食子酸

研究在硫酸-盐酸介质下,没食子酸与铈(Ⅳ)和罗丹明6G体系的化学发光行为,并对影响化学发光强度的诸因素进行试验和探讨,据此建立了流动注射化学发光法检测没食子酸的新方法.检测的线性范围为1.0×10-8～1.0×10-6g/mL;检出限为3.0×10-9g/mL;对浓度为1.0×10-7g/mL没食子酸连续11次测定,其相对标准偏差为2.1%.该方法应用于清咽片中没食子酸含量的测定,结果满意.     

铈(IV)-罗丹明6G化学发光体系测定中药清咽片中没食子酸

研究在硫酸--盐酸介质下,没食子酸与铈(Ⅳ)和罗丹明6G体系的化学发光行为,并对影响化学发光强度的诸因素进行试验和探讨,据此建立了流动注射化学发光法检测没食子酸的新方法.检测的线性范围为1.0×10-8～1.0×10-6g/mL;检出限为3.0×10-9g/mL;对浓度为1.0×10-7g/mL没食子酸连续11次测定,其相对标准偏差为2.1%.该方法应用于清咽片中没食子酸含量的测定,结果满意.     

高锰酸钾-罗丹明B化学发光测定硫酸特布他林

基于稀硫酸介质中,罗丹明B-高锰酸钾与硫酸特布他林的发光体系,建立了-种流动注射化学发光测定硫酸特布他林的新方法.该方法灵敏度高,操作简便,线性范围宽(1.0×10-7g/mL～1.0×10-5g/ml),检出限为6.2×10-8g/mL,相对标准偏差为2.0%(n=11,Cs=5.0×10-6g/mL),应用于测定博利康尼片剂并与标准方法(中国药典法)比较,结果满意.     

锰(Ⅳ)-甲醛流动注射化学发光体系测定酪氨酸

根据锰(Ⅳ)氧化酪氨酸可以产生弱的化学发光,甲醛对这一化学发光反应有较强的增敏作用的原理,建立了测定酪氨酸的流动注射化学发光分析法.实验结果表明,该方法检出限为2.0×10-7g/mL酪氨酸,线性响应范围为8.0×10-7～1.0×10-5g/mL.对5.0×10-6g/mL酪氨酸进行11次测定,相对标准偏差为2.1%.该法已应用于测定医用18 氨基酸注射液中的L 酪氨酸.     

流动注射化学发光法测定芬布芬

建立了一种测定芬布芬的流动注射化学发光新方法.在1.0×10-7～9.0×10-6 g/mL范围内,高锰酸钾-甲醛体系的相对化学发光强度与芬布芬浓度呈良好的线性关系,方法的检出限为1.5×10-7 g/mL.对1.0×10-6 g/mL芬布芬平行测定11次,相对标准偏差为1.0%.本方法可应用于片剂中芬布芬的测定,结果显示回收率为94%～97%.     

基于碳质印刷电极电化学发光分析法测定四环素

基于碱性介质中的荧光素(fluorescein)在碳质印刷电极上的弱电氧化化学发光信号可被四环素增敏,建立了测定四环素的高选择性电化学发光分析新方法.在实验所建立的最佳条件下,该方法测定四环素的线性范围为1.0×10-6～3.0×10-4g/mL,检出限为7 0×10-7g/mL,相对标准偏差为2.4%(n=11;c=1 0×10-5g/mL).该方法已应用于片剂四环素样品的分析.     

高锰酸钾-甲醛-()化学发光体系的研究

在甲醛存在下,高锰酸钾与()能够发生化学发光反应,产生很强的化学发光,由此建立了一种测定()的流动注射化学发光分析法.方法的检出限为4.5×10-8g/mL,相对标准偏差为1.3%(1.0×10-6g/mL(),n＝11),线性范围为1.0×10-7～1.0×10-5g/mL.该法已用于尿样中()的测定.     

鲁米诺-Cu(Ⅱ)-盐酸二甲双胍化学发光体系的研究

在Cu(Ⅱ)存在下,研究了luminol-Cu(Ⅱ)-盐酸二甲双胍化学发光体系,建立了测定盐酸二甲双胍的流动注射化学发光新方法.结果表明,在优化的实验条件下,化学发光强度与盐酸二甲双胍浓度在1.0×10-9~1.0×10-7g/mL范围内呈线性关系.该方法测定盐酸二甲双胍的检出限为5×10-10g/mL,相对标准偏差为1.1%(1.0×10-8g/mL盐酸二甲双胍溶液,n=11).该方法已用于片剂中盐酸二甲双胍含量的测定.     

电化学发光法测定氟哌啶醇的研究

基于氟哌啶醇对钌联吡啶电化学发光强度的增强作用,建立了测定氟哌啶醇的电化学发光新方法.结果表明,在6.0×10-7mol/L钌联吡啶和0.10 mol/L磷酸盐缓冲溶液(pH值为7.50)中,控制铂电极的工作电位为1.25 V,氟哌啶醇增强化学发光强度与氟哌啶醇浓度在1.0×10-9~9.0×10-6g/mL范围内呈线性关系,检出限为8.0×10-10g/mL(S/N=3),对1.0×10-8g/mL的氟哌啶醇进行11次平行测量,相对标准偏差为1.9%.所建立的方法已应用于针剂和片剂中氟哌啶醇的测定.     

测定甲氧氯普胺的化学发光新体系

基于在碱性条件下,甲氧氯普胺能够与鲁米诺和亚铁氰化钾产生化学发光的现象,结合流动注射技术,建立了测定甲氧氯普胺的化学发光新体系.结果表明,该方法测定甲氧氯普胺的线性范围为8.0×10-8~1.0×10-4g/mL,检出限为4.0×10-8g/mL,对8.0×10-5g/mL的甲氧氯普胺标准溶液连续11次测定的相对标准偏差为1.6%.方法已成功应用于药片中甲氧氯普胺含量的测定.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.