共查询到19条相似文献,搜索用时 453 毫秒
1.
视频图像采集系统的设计与实现 总被引:7,自引:1,他引:6
阐述了一个新颖的、较为通用的视频信号采集系统软硬件设计原理.本系统采用EPLD芯片完成了以前需要多个分立芯片才能完成的采集控制电路,简化了电路设计,便于调试.系统中采用锁相环路控制视频同步.还详细介绍了EPLD程序的设计方法及流程. 相似文献
2.
Ad hoc网络交互式仿真系统 总被引:9,自引:3,他引:6
Ad hoc网络的多跳特性和结点的移动性使得协议的调试变得非常困难。本首先分析了Ad hoc网络协议调试的难点,提出了使用交互式仿真系统调试的方法,然后对我国开发的Ad hoc网络交互式仿真系统的功能,结构和实现方法做了详细的介绍,文章的最后介绍了我们使用该仿真系统调试协议的过程。 相似文献
3.
Vega开发环境的扩展研究 总被引:8,自引:2,他引:6
目前版本的Vega软件不能满足各工程领域的视景仿真开发需求。在分析了Vega组成及工作原理的基础上,提出了开发Vega扩展模块的方法。包括:开发DLL以创建自定义模块类,通过注册回调函数以支持Vega公用函数以及实现具体的绘图功能;定义DLL导出函数为客户程序初始化模块等提供接口;创建关键字配置文件、GUI配置文件以及Lynx插件DLL,实现Lynx界面的扩展。基于该方法研制的“水下空间”模块已付诸应用,提高了水下场景视景仿真的开发效率。 相似文献
4.
本文介绍了可分离二维数字滤波器的设计程序。在滤波器的设计和实现过程中所采用的计算方法是很有效的。文中给出的几个例子说明了这种设计方法的应用。 相似文献
5.
6.
基于PC机的无人机仿真系统开发 总被引:5,自引:1,他引:4
本文介绍了一个基于PC机的无人机仿真系统,采用MFC单文档-多视图程序框架和嵌入方式的组件化结构,实现由界面层、组织层、功能层构成的仿真程序。介绍了仿真系统的界面和功能。 相似文献
7.
针对HLA作为新一代分布交互仿真体系结构,增加了数据记录系统的实现难度,介绍了基于HLA的仿真数据记录系统的体系结构、主要功能模块及其相应实现策略。重点研究了系统实现过程中的关键技术进行研究,并结合工程实践,对数据文件记录格式和存储方法提出了一定见解。作为分布交互仿真系统的一个重要组成部分,该记录系统已经成功应用于综合仿真环境项目的全系统集成调试工作中,显著提高了系统调试工作的效率、客观性和准确性,缩短了系统集成调试的周期。 相似文献
8.
电站仿真建模图形化软件系统——GNET 总被引:1,自引:0,他引:1
GNET是火电厂仿真机图形建模一体化环境。GNET建模软件完全采用图形化用户接口,使建模人员能够通过友好、方便的图形界面和数据库、模块、模型程序进行联系,完成从建模到调试的全过程,从而大大地方便了仿真建模工作 相似文献
9.
10.
11.
The GPS multipath signal model is presented, which indicates that the coherent DLL outputs in multipath environment are the convolution between the ideal DLL outputs and the channel responses. So the channel responses can be estimated by a least square method using the observed curve of the DLL discriminator. In terms of the estimated multipath channels, two multipath mitigation methods are discussed, which are equalization filtering and multipath subtracting, respectively. It is shown, by computer simulation, that the least square method has a good performance in channels estimation and the multipath errors can be mitigated almost completely by either of the methods. However, the multipath subtracting method has relative small remnant errors than equalization filtering. 相似文献
12.
潘永吉 《系统工程与电子技术》1989,(11)
本文叙述了设计高方向性微带定向耦合器的方法,综合出了一套较精确而实用的计算公式。此公式适用于设计陶瓷基片微带定向耦合器,经引入有效磁导率μ_(deff)后又可用于铁氧体基片微带定向耦合器设计。这套公式比较直观,便于编制程序以进行计算机辅助设计(CAD)。我们用铁氧体基片研究出了耦合度C=-6dB~-20dB之间不同波段上高方向性微带耦合器,这些器件已正式用于雷达系统。 相似文献
13.
Application of Petri Net to Fault Diagnosis in Satellite 总被引:2,自引:0,他引:2
1. INTaODUCTIONPetri net is always applied to discrete dynamic systems as a modeling toOl. It has adVantages against Othertools as direct modeling and strict analysis. Petri net can be considered as a graph which is converted intoother from known knowledge represelltation or from st~ure, funcfion or behavior of a system. The occurs when the variables of a system increase that calculation of system design becomes too complicsted to becompleted by hand. Instead, it comes into possible at t… 相似文献
14.
JIANG Chanaiun 《系统科学与系统工程学报(英文版)》1999,(2)
1IntroductionWiththedevelopmentofcomputerscience,parallelmodelandparajleltreatingarepaidmoreandmoreextensiveattention.Parallelprogrammingunderparajlelenvironmentisthenecessarypathforpeopletoreajizetheconcurrentcomputation.However,programmingunderparallelenvironmentismuchmoredifficultthanserialenvironmentforparajlelprograminvolvesmorethanoneprocesswhichruninmorethanoneprocessor.Moreover,theseprocessesoftencommunicateeachother.Sotheparallelprogrammustensureboththecorrectnessofcomputationandcomm… 相似文献
15.
基于VB的PLC与微机通讯及其应用 总被引:7,自引:0,他引:7
从OMRONCQM1型可编程控制器的使用属性和系统构成特征出发,详细分析了PLC与上微机间的通讯协议、VB的通讯机制及其适用范围,结合壁面清洗机器人监控系统的监控程序设计之实例,系统地研究了在VB环境下的PLC与上位监控计算机之间通讯程序的设计方法和使用要点,提出了一种实现PLC与微机之间的快速、便捷和可靠的通讯方式,并且在壁面清洗机器人系统监控程序的设计中加以了验证。 相似文献
16.
作战武器任务规划仿真系统原型的开发 总被引:1,自引:0,他引:1
针对复杂虚拟战场环境下的联合作战仿真,设计出了一套仿真方案。利用建模软件Maya、人机交互仿真软件Virtools及程序开发语言C#,开发出了该方案的一个原型。原型采用了根据模型精细度建模、模块化程序设计等优化设计方法。程序运行结果表明,该原型具有模型文件量小、仿真视觉效果佳、程序运行流畅及程序可修改性、可重用性较好等特点,其针对武器装备的作战规划仿真结果为联合作战环境下武器装备的效能评估提供了依据。Abstract: A simulation scheme was designed aiming at joint operations simulation in the comprehensive virtual combat environment which developed the prototype of this scheme, with modeling software Maya, human-computer interaction designing software Virtools, program developing language C#. The prototype applied optimum design methods like modeling according to models' fineness, modular program designing and so on. Based on the program running results, the prototype possessed such good features as lightweight modeling, good visual effects, fluent program operation, better modifying and reusing properties, etc. The simulation results for weapon equipment mission planning provide reference to weapon equipment effectiveness evaluation in the joint operational environment. 相似文献
17.
18.
MATLAB在数字图像处理CAI课件制作中的应用 总被引:2,自引:0,他引:2
利用MATLAB6.1可视化编辑图形界面的能力,结合图像滤波的实例,介绍了利用MATLAB的图形用户界面进行数字图像处理课件制作的方法和具体步骤,给出了具体的程序,并针对实际图像进行实验。仿真实验结果表明,利用此方法进行课件制作是可行和有效的。 相似文献