共查询到20条相似文献,搜索用时 687 毫秒
1.
2.
基于T-S模型的迭代学习控制算法及其在机器人点位控制中的仿真研究 总被引:3,自引:2,他引:3
考虑了一类特殊的迭代学习控制问题,即用迭代学习方法解决机器人的点位控制问题。采用T-S模型描述机器人系统,在T-S模型的基础上,运用并行分配补偿方法(PDC)确定T-S模型的迭代学习控制器结构,并给出了误差收敛条件。为避免迭代过程的初始定位操作,丈中还设计了模糊循环迭代学习律。最后以在垂直面内运动的单关节的机器人为例说明了所提出方法的有效性。 相似文献
3.
4.
针对一类正则线性不确定系统,提出一种基于连续/离散二维混合模型的迭代学习控制设计方法。首先,通过独立地考虑迭代学习控制系统连续的控制行为与离散的学习行为,建立迭代学习控制系统的连续/离散二维混合模型,将迭代学习控制器设计问题转化为一类连续/离散二维系统的状态反馈控制问题。然后应用二维连续/离散系统方法,获得迭代学习控制系统稳定性条件。最后根据稳定性条件,利用线性矩阵不等式方法,求得迭代学习控制器参数,它通过Matlab工具箱可以方便的获得。与现有方法相比,所提出的迭代学习控制器利用了输出误差以及状态变化的信息来修正当前的控制,因而设计方法更加符合其本质特征,具有简单实用、直观明了的特点。数值仿真实例验证了所提方法的有效性。 相似文献
5.
滞后广义系统状态跟踪的学习控制算法 总被引:12,自引:0,他引:12
尝试性的将迭代学习控制方法应用于滞后广义系统的状态跟踪控制上,针对满足A22可逆条件的滞后广义系统,给出了跟踪控制的学习算法,并对算法的收敛性及状态跟踪的可能性进行了分析。我们所设计的学习控制器对系统有很好的鲁棒性能,对A22不可逆,对此将另文讨论。 相似文献
6.
基于迭代学习控制的PID控制器设计 总被引:4,自引:0,他引:4
针对传统的经验PID整定方法,提出了一种新的PID参数整定算法。该算法首先利用PD型迭代学习控制来进行期望轨迹的跟踪控制,然后根据迭代学习控制的输入输出数据序列,通过强跟踪滤波器来进行参数辨识,可获得对应于期望轨迹的优化的PID控制参数。给出了迭代学习控制的收敛条件,以及如何利用强跟踪滤波器来进行参数辨识。仿真和实验结果表明,采用该算法设计PID控制器,被控系统可以获得较佳的动态性能和较强的鲁棒性。 相似文献
7.
研究了一类具有随机时延和控制器增益扰动的非线性网络控制系统的非脆弱保性能控制问题。基于变采样周期的方法,将网络控制系统建模为非线性Markov跳变系统。利用Lyapunov稳定性理论,给出了保证整个闭环系统均方随机渐近稳定的充分条件。通过线性矩阵不等式的方法,设计了一种非脆弱状态反馈控制器,在该控制器的作用下,闭环系统的能量函数值不超过一个规定的上界。仿真算例说明了所提方法的有效性。 相似文献
8.
研究了一类存在时变时延和丢包的网络控制系统(networked control systems, NCS )的H∞优化控制问题。当网络时延和连续丢包有界时,NCS被建模为等效的具有时变时滞的系统,利用Lvapunov Krasovskii泛函和线性矩阵不等式方法,在NCS渐近稳定的基础上给出NCS状态反馈次优和最优H∞控制律的设计方法,求解时不需要使用重复迭代,设计控制器时也无须知道调节参数。仿真表明了此方法的可行性和有效性。 相似文献
9.
任意初始状态下迭代学习控制的频域分析 总被引:6,自引:0,他引:6
针对广义受控对象G(s) ,提出了一种迭代学习控制器在频域中设计的思想 ,给出了在任意初始状态下迭代学习控制算法收敛的充分条件 ,证明了经过逐次迭代后系统实际输出信号对期望输出信号的逼近特性 ,输出跟踪误差将一致有界 ,且与期望状态及期望输入无关。进一步讨论了反馈控制在迭代学习控制器中的作用。仿真结果表明了该算法的有效性。 相似文献
10.
一类非线性系统在任意初值下的开环D型迭代学习控制 总被引:1,自引:0,他引:1
给出了一类非线性时变系统在任意初值条件下采用开环D型迭代学习控制算法时的收敛条件,运用算子理论进行收敛性证明。该算法克服了系统输出信号跟踪期望输出依赖于期望状态和期望输入的缺陷,解决了迭代学习控制中的初始状态问题,而且收敛条件放宽了,给出了仿真研究实例,研究结果说明该算法的有效性。 相似文献
11.
Research on robust mean square stability of networked control systems with packet dropout 总被引:1,自引:0,他引:1 下载免费PDF全文
This paper is concerned with the robust stabilization problem of networked control systems with stochastic packet dropouts and uncertain parameters. Considering the stochastic packet dropout occuring in two channels between the sensor and the controller, and between the controller and the actuator, networked control systems are modeled as the Markovian jump linear system with four operation modes. Based on this model, the necessary and sufficient conditions for the mean square stability of the deterministic... 相似文献
12.
Impulsive controller design for nonlinear networked control systems with time delay and packet dropouts 下载免费PDF全文
The globally exponential stability of nonlinear impulsive networked control systems(NINCS) with time delay and packet dropouts is investigated.By applying Lyapunov function theory,sufficient conditions on the global exponential stability are derived by introducing a comparison system and estimating the corresponding Cauchy matrix.An impulsive controller is explicitly designed to achieve exponential stability and ensure state converge with a given decay rate for the system.The Lorenz oscillator system is presented as a numerical example to illustrate the theoretical results and effectiveness of the proposed controller design procedure. 相似文献
13.
The robust H∞ control for networked control systems with both stochastic network-induced delay and data packet dropout is studied.When data are transmitted over network,the stochastic data packet dropout process can be described by a two-state Markov chain.The networked control systems with stochastic network-induced delay and data packet dropout are modeled as a discrete time Markov jump linear system with two operation modes.The sufficient condition of robust H∞ control for networked control systems stabilized by state feedback controller is presented in terms of linear matrix inequality.The state feedback controller can be constructed via the solution of a set of linear matrix inequalities.An example is given to verify the effectiveness of the method proposed. 相似文献
14.
针对一类网络化控制系统,提出一种输出反馈控制的新方法--观测器/控制器集成设计。该方法借助状态观测器重构系统状态,设计输出反馈控制器,将闭环系统建模为一类混杂系统。利用Lyapunov-Krasovskii泛函方法,以线性矩阵不等式(linear matrix inequality, LMI)形式给出了闭环系统的稳定性判据以及观测器/控制器的集成设计方法。仿真算例说明了所提出的方法简单、有效且易于实现。 相似文献
15.
The robust H∞ control for networked control systems with both stochastic network-induced delay and data packet dropout is studied. When data are transmitted over network, the stochastic data packet dropout process can be described by a two-state Markov chain. The networked control systems with stochastic network-induced delay and data packet dropout are modeled as a discrete time Markov jump linear system with two operation modes. The sufficient condition of robust H∞ control for networked control systems stabilized by state feedback controller is presented in terms of linear matrix inequality. The state feedback controller can be constructed via the solution of a set of linear matrix inequalities. An example is given to verify the effectiveness of the method proposed. 相似文献
16.
A new controller design problem of networked control systems with packet dropping is proposed. Depending on the place that the observer is put in the system, the network control systems with packet dropping are modeled as stochastic systems with the random variables satisfying the Bernoulli random binary distribution. The observer-based controller is designed to stabilize the networked system in the sense of mean square, and the prescribed H∞ disturbance attenuation level is achieved. The controller design problem is formulated as the feasibility of the convex optimization problem, which can be solved by a linear matrix inequality (LMI) approach. Numerical examples illustrate the effectiveness of the proposed methods. 相似文献
17.
In this paper, the data-based control problem is investigated for a class of networked nonlinear systems with measurement noise as well as packet dropouts in the feedback and forward channels. The measurement noise and the number of consecutive packet dropouts in both channels are assumed to be random but bounded. A data-based networked predictive control method is proposed, in which a sequence of control increment predictions are calculated in the controller based on the measured output error, and based on the control increment predictions received by the actuator, a proper control action is obtained and applied to the plant according to the real-time number of consecutive packet dropouts at each sampling instant. Then the stability analysis is performed for the networked closedloop system. Finally, the effectiveness of the proposed method is illustrated by a numerical example. 相似文献
18.
Research on fault-tolerant control of networked control systems based on information scheduling 总被引:2,自引:1,他引:1
A kind of networked control system is studied; the networked control system with noise disturbance is modeled based on information scheduling and control co-design. Augmented state matrix analysis method is introduced, and robust fault-tolerant control problem of networked control systems with noise disturbance under actuator failures is studied. The parametric expression of the controller under actuator failures is given. Furthermore, the result is analyzed by simulation tests, which not only satisfies the networked control systems stability, but also decreases the data information number in network channel and makes full use of the network resources. 相似文献
19.
针对网络控制系统(NCS)同时存在网络诱导时延和数据包丢失的情况,讨论了如何设计控制器的问题。首先,给出了一种新的闭环网络控制系统的建模方法——模糊T-S方法,利用这种模糊模型去逼近非线性网络控制系统,使之局部线性化,并在此模型的基础上应用平行分布补偿原理设计了网络控制系统模糊控制器。进而,应用Lyapunov理论和LMI方法,研究了模糊NCS的稳定性问题,同时基于线性矩阵不等式给出依赖状态时滞和网络诱导时延的状态反馈模糊控制器的设计方法,并获得使模糊NCS稳定的充分条件。通过两个仿真实例验证了该控制方法的有效性。 相似文献
20.
A new controller design problem of networked control systems with packet dropping is proposed. Depending on the place that the observer is put in the system, the network control systems with packet dropping are modeled as stochastic systems with the random variables satisfying the Bernoulli random binary distribution. The observer-based controller is designed to stabilize the networked system in the sense of mean square, and the prescribed H∞ disturbance attenuation level is achieved. The controller design problem is formulated as the feasibility of the convex optimization problem, which can be solved by a linear matrix inequality (LMI) approach. Numerical examples illustrate the effectiveness of the proposed methods. 相似文献