利用耦合超导量子比特实现受控U门

运用两量子比特非局域操作的几何表示理论,提出了利用射频脉冲作用下的耦合超导量子比特构建受控逻辑门(受控U门)的一个理论方案,并进一步推导出在电容耦合和自感耦合系统中构建受控U门时,其哈密顿量中的拉比频率所需要满足的条件.最后通过两量子比特控制相位门的实现说明该方案的可行性.     

Generation of three-qubit entangled states using superconducting phase qubits

Entanglement is one of the key resources required for quantum computation, so the experimental creation and measurement of entangled states is of crucial importance for various physical implementations of quantum computers. In superconducting devices, two-qubit entangled states have been demonstrated and used to show violations of Bell's inequality and to implement simple quantum algorithms. Unlike the two-qubit case, where all maximally entangled two-qubit states are equivalent up to local changes of basis, three qubits can be entangled in two fundamentally different ways. These are typified by the states |GHZ>= (|000+?|111>)/ sqrt [2] and |W>= (|001>?+?|010>?+?|100>)/ sqrt [3]. Here we demonstrate the operation of three coupled superconducting phase qubits and use them to create and measure |GHZ> and |W>states. The states are fully characterized using quantum state tomography and are shown to satisfy entanglement witnesses, confirming that they are indeed examples of three-qubit entanglement and are not separable into mixtures of two-qubit entanglement.     

超导量子比特中的Landau-Zener-Stckelberg干涉

超导量子比特是人工固态量子系统,在低温和弱耗散条件下,具有量子化的能级结构.这些能级之间的间隔可以随外加偏置电磁场连续变化,不同能级在某些偏置场可能形成量子系统中所特有的免交叉.最近研究成果表明,利用这些免交叉,可以在固态量子比特中实现Landau-Zener-Stckelberg（LZS）干涉,为测量系统的能谱、表征系统与环境的耦合、实现量子逻辑门、产生量子纠缠等提供了一个便捷的新手段.     

Coupling superconducting qubits via a cavity bus

Superconducting circuits are promising candidates for constructing quantum bits (qubits) in a quantum computer; single-qubit operations are now routine, and several examples of two-qubit interactions and gates have been demonstrated. These experiments show that two nearby qubits can be readily coupled with local interactions. Performing gate operations between an arbitrary pair of distant qubits is highly desirable for any quantum computer architecture, but has not yet been demonstrated. An efficient way to achieve this goal is to couple the qubits to a 'quantum bus', which distributes quantum information among the qubits. Here we show the implementation of such a quantum bus, using microwave photons confined in a transmission line cavity, to couple two superconducting qubits on opposite sides of a chip. The interaction is mediated by the exchange of virtual rather than real photons, avoiding cavity-induced loss. Using fast control of the qubits to switch the coupling effectively on and off, we demonstrate coherent transfer of quantum states between the qubits. The cavity is also used to perform multiplexed control and measurement of the qubit states. This approach can be expanded to more than two qubits, and is an attractive architecture for quantum information processing on a chip.     

Quantum oscillations in two coupled charge qubits

A practical quantum computer, if built, would consist of a set of coupled two-level quantum systems (qubits). Among the variety of qubits implemented, solid-state qubits are of particular interest because of their potential suitability for integrated devices. A variety of qubits based on Josephson junctions have been implemented; these exploit the coherence of Cooper-pair tunnelling in the superconducting state. Despite apparent progress in the implementation of individual solid-state qubits, there have been no experimental reports of multiple qubit gates--a basic requirement for building a real quantum computer. Here we demonstrate a Josephson circuit consisting of two coupled charge qubits. Using a pulse technique, we coherently mix quantum states and observe quantum oscillations, the spectrum of which reflects interaction between the qubits. Our results demonstrate the feasibility of coupling multiple solid-state qubits, and indicate the existence of entangled two-qubit states.     

Manipulating spin and charge in magnetic semiconductors using superconducting vortices

The continuous need for miniaturization and increase in device speed drives the electronics industry to explore new avenues of information processing. One possibility is to use electron spin to store, manipulate and carry information. All such 'spintronics' applications are faced with formidable challenges in finding fast and efficient ways to create, transport, detect, control and manipulate spin textures and currents. Here we show how most of these operations can be performed in a relatively simple manner in a hybrid system consisting of a superconducting film and a paramagnetic diluted magnetic semiconductor (DMS) quantum well. Our proposal is based on the observation that the inhomogeneous magnetic fields of the superconducting film create local spin and charge textures in the DMS quantum well, leading to a variety of effects such as Bloch oscillations and an unusual quantum Hall effect. We exploit recent progress in manipulating magnetic flux bundles (vortices) in superconductors and show how these can create, manipulate and control the spin textures in DMSs.     

Implementation of a Toffoli gate with superconducting circuits

The Toffoli gate is a three-quantum-bit (three-qubit) operation that inverts the state of a target qubit conditioned on the state of two control qubits. It makes universal reversible classical computation possible and, together with a Hadamard gate, forms a universal set of gates in quantum computation. It is also a key element in quantum error correction schemes. The Toffoli gate has been implemented in nuclear magnetic resonance, linear optics and ion trap systems. Experiments with superconducting qubits have also shown significant progress recently: two-qubit algorithms and two-qubit process tomography have been implemented, three-qubit entangled states have been prepared, first steps towards quantum teleportation have been taken and work on quantum computing architectures has been done. Implementation of the Toffoli gate with only single- and two-qubit gates requires six controlled-NOT gates and ten single-qubit operations, and has not been realized in any system owing to current limits on coherence. Here we implement a Toffoli gate with three superconducting transmon qubits coupled to a microwave resonator. By exploiting the third energy level of the transmon qubits, we have significantly reduced the number of elementary gates needed for the implementation of the Toffoli gate, relative to that required in theoretical proposals using only two-level systems. Using full process tomography and Monte Carlo process certification, we completely characterize the Toffoli gate acting on three independent qubits, measuring a fidelity of 68.5?±?0.5 per cent. A similar approach to realizing characteristic features of a Toffoli-class gate has been demonstrated with two qubits and a resonator and achieved a limited characterization considering only the phase fidelity. Our results reinforce the potential of macroscopic superconducting qubits for the implementation of complex quantum operations with the possibility of quantum error correction.     

Demonstration of an all-optical quantum controlled-NOT gate

The promise of tremendous computational power, coupled with the development of robust error-correcting schemes, has fuelled extensive efforts to build a quantum computer. The requirements for realizing such a device are confounding: scalable quantum bits (two-level quantum systems, or qubits) that can be well isolated from the environment, but also initialized, measured and made to undergo controllable interactions to implement a universal set of quantum logic gates. The usual set consists of single qubit rotations and a controlled-NOT (CNOT) gate, which flips the state of a target qubit conditional on the control qubit being in the state 1. Here we report an unambiguous experimental demonstration and comprehensive characterization of quantum CNOT operation in an optical system. We produce all four entangled Bell states as a function of only the input qubits' logical values, for a single operating condition of the gate. The gate is probabilistic (the qubits are destroyed upon failure), but with the addition of linear optical quantum non-demolition measurements, it is equivalent to the CNOT gate required for scalable all-optical quantum computation.     

Demonstration of controlled-NOT quantum gates on a pair of superconducting quantum bits

Quantum computation requires quantum logic gates that use the interaction within pairs of quantum bits (qubits) to perform conditional operations. Superconducting qubits may offer an attractive route towards scalable quantum computing. In previous experiments on coupled superconducting qubits, conditional gate behaviour and entanglement were demonstrated. Here we demonstrate selective execution of the complete set of four different controlled-NOT (CNOT) quantum logic gates, by applying microwave pulses of appropriate frequency to a single pair of coupled flux qubits. All two-qubit computational basis states and their superpositions are used as input, while two independent single-shot SQUID detectors measure the output state, including qubit-qubit correlations. We determined the gate's truth table by directly measuring the state transfer amplitudes and by acquiring the relevant quantum phase shift using a Ramsey-like interference experiment. The four conditional gates result from the symmetry of the qubits in the pair: either qubit can assume the role of control or target, and the gate action can be conditioned on either the 0-state or the 1-state. These gates are now sufficiently characterized to be used in quantum algorithms, and together form an efficient set of versatile building blocks.     

专用炉混装模式下作业计划优化方法

针对钢铁企业热装作业中专用炉混装作业计划编制难题,建立了一体化作业计划优化模型,并提出基于优化与简单仿真相结合的多步骤优化方法进行模型求解.在给定工艺参数情况下,提出的算法可快速给出优化的、一体化专用炉混装作业计划及冷装、热装板坯的详细作业时刻.模型给出的优化结果满足工业实际需求,作业计划具有较强的可行性及可操作性.     

Atomic physics and quantum optics using superconducting circuits

Superconducting circuits based on Josephson junctions exhibit macroscopic quantum coherence and can behave like artificial atoms. Recent technological advances have made it possible to implement atomic-physics and quantum-optics experiments on a chip using these artificial atoms. This Review presents a brief overview of the progress achieved so far in this rapidly advancing field. We not only discuss phenomena analogous to those in atomic physics and quantum optics with natural atoms, but also highlight those not occurring in natural atoms. In addition, we summarize several prospective directions in this emerging interdisciplinary field.     

Deterministic quantum teleportation of atomic qubits

Quantum teleportation provides a means to transport quantum information efficiently from one location to another, without the physical transfer of the associated quantum-information carrier. This is achieved by using the non-local correlations of previously distributed, entangled quantum bits (qubits). Teleportation is expected to play an integral role in quantum communication and quantum computation. Previous experimental demonstrations have been implemented with optical systems that used both discrete and continuous variables, and with liquid-state nuclear magnetic resonance. Here we report unconditional teleportation of massive particle qubits using atomic (9Be+) ions confined in a segmented ion trap, which aids individual qubit addressing. We achieve an average fidelity of 78 per cent, which exceeds the fidelity of any protocol that does not use entanglement. This demonstration is also important because it incorporates most of the techniques necessary for scalable quantum information processing in an ion-trap system.     

Experimental realization of freely propagating teleported qubits

Quantum teleportation is central to quantum communication, and plays an important role in a number of quantum computation protocols. Most information-processing applications of quantum teleportation include the subsequent manipulation of the qubit (the teleported photon), so it is highly desirable to have a teleportation procedure resulting in high-quality, freely flying qubits. In our previous teleportation experiment, the teleported qubit had to be detected (and thus destroyed) to verify the success of the procedure. Here we report a teleportation experiment that results in freely propagating individual qubits. The basic idea is to suppress unwanted coincidence detection events by providing the photon to be teleported much less frequently than the auxiliary entangled pair. Therefore, a case of successful teleportation can be identified with high probability without the need actually to detect the teleported photon. The experimental fidelity of our procedure surpasses the theoretical limit required for the implementation of quantum repeaters.     

Long-distance teleportation of qubits at telecommunication wavelengths

Matter and energy cannot be teleported (that is, transferred from one place to another without passing through intermediate locations). However, teleportation of quantum states (the ultimate structure of objects) is possible: only the structure is teleported--the matter stays at the source side and must be already present at the final location. Several table-top experiments have used qubits (two-dimensional quantum systems) or continuous variables to demonstrate the principle over short distances. Here we report a long-distance experimental demonstration of probabilistic quantum teleportation. Qubits carried by photons of 1.3 micro m wavelength are teleported onto photons of 1.55 micro m wavelength from one laboratory to another, separated by 55 m but connected by 2 km of standard telecommunications fibre. The first (and, with foreseeable technologies, the only) application of quantum teleportation is in quantum communication, where it could help to extend quantum cryptography to larger distances.     

联合分布函数的条件反失效率刻画

基于条件反失效率函数,得到了联合分布函数的一种表示.     

渗透系数的条件模拟对污染物运移的不确定性分析

应用基于顺序条件模拟的蒙特卡罗方法,分析不同的先验渗透系数对污染物运移的不确定性影响.研究结果证明渗透系数的条件模拟可大大降低污染物运移结果的不确定性;随着渗透系数条件点数的变化,通过模拟得到的含水层中污染羽的空间矩(一阶矩和二阶矩)变化并不明显,各点的污染物浓度均值变化也不大.而污染物浓度变化的最大方差(不确定性)则随着渗透系数条件点数的增加而减小,同时运移结果的不确定性还取决于渗透系数条件点在空间上的分布位置.最后,根据渗透系数不同的条件模拟对污染物运移结果的响应,对实际工作中选取条件点的多寡提出相应的建议.     

一种基于动作条件互斥的处理动作条件效果的算法

在给出动作无条件互斥、动作半条件互斥和动作全条件互斥等概念的基础上,提出一种新的算法,在规划图的扩张阶段建立各种互斥关系,在规划解的搜索过程中利用这些互斥关系,判断是否需要进行条件冲突检测,从而加快了有效规划的搜索,提高了系统的效率.     

二次型在超曲面上条件极值的矩阵解法

利用矩阵理论得到了二次型在一般的二次超曲面上取得条件极值的充分条件,并结合实例用Matlab编程实现了求解过程．     

Tuning charge transport in solution-sheared organic semiconductors using lattice strain

Circuits based on organic semiconductors are being actively explored for flexible, transparent and low-cost electronic applications. But to realize such applications, the charge carrier mobilities of solution-processed organic semiconductors must be improved. For inorganic semiconductors, a general method of increasing charge carrier mobility is to introduce strain within the crystal lattice. Here we describe a solution-processing technique for organic semiconductors in which lattice strain is used to increase charge carrier mobilities by introducing greater electron orbital overlap between the component molecules. For organic semiconductors, the spacing between cofacially stacked, conjugated backbones (the π-π stacking distance) greatly influences electron orbital overlap and therefore mobility. Using our method to incrementally introduce lattice strain, we alter the π-π stacking distance of 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene) from 3.33?? to 3.08??. We believe that 3.08?? is the shortest π-π stacking distance that has been achieved in an organic semiconductor crystal lattice (although a π-π distance of 3.04?? has been achieved through intramolecular bonding). The positive charge carrier (hole) mobility in TIPS-pentacene transistors increased from 0.8?cm(2)?V(-1)?s(-1) for unstrained films to a high mobility of 4.6?cm(2)?V(-1)?s(-1) for a strained film. Using solution processing to modify molecular packing through lattice strain should aid the development of high-performance, low-cost organic semiconducting devices.     

Dimensioning a stockpile operation using principal component analysis

Mineral processing plants generally have narrow tolerances for the grades of their input raw materials, so stockpiles are often maintained to reduce material variance and ensure consistency. However, designing stockpiles has often proven difficult when the input material consists of multiple sub-materials that have different levels of variances in their grades. In this paper, we address this issue by applying principal component analysis(PCA) to reduce the dimensions of the input data. The study was conducted in three steps. First, we applied PCA to the input data to transform them into a lower-dimension space while retaining 80% of the original variance. Next, we simulated a stockpile operation with various geometric stockpile configurations using a stockpile simulator in MATLAB. We used the variance reduction ratio as the primary criterion for evaluating the efficiency of the stockpiles. Finally, we used multiple regression to identify the relationships between stockpile efficiency and various design parameters and analyzed the regression results based on the original input variables and principal components. The results showed that PCA is indeed useful in solving a stockpile design problem that involves multiple correlated input-material grades.