Filter Paper-Derived Three-Dimensional Carbon Fibers Film Supported Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> as a Superior Binder-Free Anode Material for High Performance Lithium-Ion Batteries

Highly uniform and tight adhering of Fe₃O₄ particles on carbon fiber film (Fe₃O₄/CFF) is achieved through a simple in-situ thermal oxidation method. Particularly, 3D CFF with interconnected structure can shorten transfer path and buffer the volume expansion during charge-discharge cycling. Herein, the obtained Fe₃O₄/CFF anode exhibits a stable cycling performance and excellent high rate capability. The cell delivers a reversible capacity of 1 711 mAh·g^–1 at a current density of 100 mA·g^–1 after 100 cycles. Even at a high rate density of 2 A·g^–1, the specific capacity also can maintain 1 034 mAh·g^–1 after 100 cycles. The simplified fabrication is featured with low-cost and this binder-free perspective holds great potential in mass-production of high-performance metal oxide electrochemical devices.     

Analysis of the factors affecting the magnetic characteristics of nano-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> particles

We prepared Fe3O4 nanoparticles using chemical coprecipitation and studied the factors affecting the magnetic characteristics of nano-Fe3O4 particles.We identified four factors and three levels of an orthogonal experiment and investigated these four factors that affect the magnetic characteristics of the Fe3O4 particles.We obtained important information from this investigation.The Fe3+ to Fe2+ molar ratio,the iron precursor salt,the amount of surfactant and the amount of alkali were found to be important.We also studied the influence of the order of alkali and surfactant addition,the aging time and the stirring speed on the magnetic characteristics of the nano-Fe3O4 particles.The Fe3O4 preparation process was also analyzed.     

Electrochemical properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.3</Subscript>Ti<Subscript>0.2</Subscript>O<Subscript>4</Subscript>/Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> cells

Spinel compounds LiNi_0.5Mn_1.3Ti_0.2O₄ (LNMTO) and Li₄Ti₅O₁₂ (LTO) were synthesized by different methods. The particle sizes of LNMTO and LTO are 0.5–2 and 0.5–0.8 μm, respectively. The LNMTO/LTO cell exhibits better electrochemical properties at both a low current rate of 0.2C and a high current rate of 1C. When the specific capacity was determined based on the mass of the LNMTO cathode, the LNMTO/LTO cell delivered 137 mA·h·g⁻¹ at 0.2C and 118.2 mA·h·g⁻¹ at 1C, and the corresponding capacity retentions after 30 cycles are 88.5% and 92.4%, respectively.     

Microwave absorption properties of SiC@SiO2@Fe3O4 hybrids in the 2-18 GHz range

To enhance the microwave absorption performance of silicon carbide nanowires (SiCNWs), SiO₂ nanoshells with a thickness of approximately 2 nm and Fe₃O₄ nanoparticles were grown on the surface of SiCNWs to form SiC@SiO₂@Fe₃O₄ hybrids. The microwave absorption performance of the SiC@SiO₂@Fe₃O₄ hybrids with different thicknesses was investigated in the frequency range from 2 to 18 GHz using a free-space antenna-based system. The results indicate that SiC@SiO₂@Fe₃O₄ hybrids exhibit improved microwave absorption. In particular, in the case of an SiC@SiO₂ to iron(Ⅲ) acetylacetonate mass ratio of 1:3, the microwave absorption with an absorber of 2-mm thickness exhibited a minimum reflection loss of -39.58 dB at 12.24 GHz. With respect to the enhanced microwave absorption mechanism, the Fe₃O₄ nanoparticles coated on SiC@SiO₂ nanowires are proposed to balance the permeability and permittivity of the materials, contributing to the microwave attenuation.     

Synthesis and magnetic properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/helical carbon nanofiber nanocomposites from the catalytic pyrolysis of ferrocene

High purity Fe3O4 /helical carbon nanofiber composites were obtained on a large scale by the catalytic pyrolysis of ferrocene in the presence of tin powder at 500°C over 12 h. The sizes of Fe 3 O 4 nanoparticles are 35–65 nm in size, and the diameters of the helical carbon nanofibers range from 40–70 nm. The shapes and compositions of the nanocomposites are simply controlled by adjusting the reaction temperatures. On the basis of the obtained experimental results the formation of the helical Fe3O4/carbon nanofiber composites was investigated and discussed. The magnetic hysteresis loop of the products shows ferromagnetic behavior with saturation magnetization (M s ), remanent magnetization (M r ) and coercivity (H c ) values of ca. 29.8 emu/g, 9.6 emu/g and 306.6 Oe, respectively.     

Enhanced electrochemical properties of LaFeO3 with Ni modification for MH-Ni batteries

In this work, we synthesized LaFeO₃-xwt%Ni (x=0, 5, 10, 15) composites via a solid-state reaction method by adding Ni to the reactants, La₂O₃ and Fe₂O₃. Field-emission scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDS) results revealed that Ni powders evenly dispersed among the LaFeO₃ particles and apparently reduced their aggregation, which imparted the composites with a loose structure. Moreover, the Ni formed a conductive network, thus improving the conductivity of the composites. The maximum discharge capacity of the LaFeO₃ electrodes remarkably increased from 266.8 mAh·g-1 (x=0) to 339.7 mAh·g-1 (x=10). In particular, the high-rate dischargeability of the LaFeO₃-10wt%Ni electrode at a discharge current density of 1500 mA·g-1 reached 54.6%, which was approximately 1.5 times higher than that of the pure LaFeO₃. Such a Ni-modified loose structure not only increased the charge transfer rate on the surface of the LaFeO₃ particles but also enhanced the hydrogen diffusion rate in the bulk LaFeO₃.     

Effect of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization behavior of glass-ceramics produced from naturally cooled yellow phosphorus furnace slag

CaO-Al₂O₃-SiO₂ (CAS) glass-ceramics were prepared via a melting method using naturally cooled yellow phosphorus furnace slag as the main raw material. The effects of the addition of Fe₂O₃ on the crystallization behavior and properties of the prepared glass-ceramics were studied by differential thermal analysis, X-ray diffraction, and scanning electron microscopy. The crystallization activation energy was calculated using the modified Johnson-Mehl-Avrami equation. The results show that the intrinsic nucleating agent in the yellow phosphorus furnace slag could effectively promote the crystallization of CAS. The crystallization activation energy first increased and then decreased with increasing amount of added Fe₂O₃. At 4wt% of added Fe₂O₃, the crystallization activation energy reached a maximum of 676.374 kJ·mol-1. The type of the main crystalline phase did not change with the amount of added Fe₂O₃. The primary and secondary crystalline phases were identified as wollastonite (CaSiO₃) and hedenbergite (CaFe(Si₂O₆)), respectively.     

Synthesis of highly ordered SnO2／Fe2O3 composite nanowire arrays by electrophoretic deposition method

Highly ordered SnO2/Fe2O3 composite nanowire arrays have been synthesized by electrophoretic deposition method. The morphology and chemical composition of SnO2/Fe2O3 composite nanowire arrays are characterized by SEM, TEM, EDX, XPS, and XRD. The results show that the SnO2/Fe2O3 composite nanowires are about 180 nm in width and tens of microns in length, and they are composed of small nanoparticles of tetraganal SnO2 and rhombohedral α-Fe203 with diameters of 10-15nm. The SnO2/Fe2O3 composite nanowires are formed by a series of chemical reactions.     

Preparation and electrochemical properties of carbon-coated LiFePO4 hollow nanofibers

Carbon-coated LiFePO₄ hollow nanofibers as cathode materials for Li-ion batteries were obtained by coaxial electrospinning. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Brunauer–Emmett–Teller specific surface area analysis, galvanostatic charge–discharge, and electrochemical impedance spectroscopy (EIS) were employed to investigate the crystalline structure, morphology, and electrochemical performance of the as-prepared hollow nanofibers. The results indicate that the carbon-coated LiFePO₄ hollow nanofibers have good long-term cycling performance and good rate capability: at a current density of 0.2C (1.0C = 170 mA·g-1) in the voltage range of 2.5–4.2 V, the cathode materials achieve an initial discharge specific capacity of 153.16 mAh·g-1 with a first charge–discharge coulombic efficiency of more than 97%, as well as a high capacity retention of 99% after 10 cycles; moreover, the materials can retain a specific capacity of 135.68 mAh·g-1, even at 2C.     

Kinetic studies of the decomposition reaction of adducts of dinuclear Fe(Ⅱ)/O2

Kinetic studies of the decomposition reaction of dinuclear Fe(Ⅱ) adducts [Fe₂(N-Et-HPTB){O₂P(OPh)₂}](Cl- O₄)₂ (1) and [Fe₂(N-Et-HPTB) {O₂P(Ph)₂}] (ClO₄)₂ (2) with O₂ have been carried out at low temperature using UV-vis spectra. The decomposition reaction of Fe(Ⅱ)/O₂ adducts was first-order in the experimental conditions, and the activation parameters were obtained. ?H^¹ = 85.62 kJ·mol^-1, ?S¹ = 19.43 J·mol^-1·K^-1 for compound (1) and ?H^¹ = 97.97 kJ·mol^-1, ?S^¹ = 55.68 J·mol^-1·K^-1 for compound (2). These results are similar to those of dioxygen adducts of other metals complexes and natural enzymes such as methane mono- oxygenase (MMOH).     

Mineral-phase evolution and sintering behavior of MO-SiO2-Al2O3-B2O3 (M=Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO₂ and network intermediate Al₂O₃ were introduced into typical low-melting binary compositions CaO·B₂O₃, CaO·2B₂O₃, and BaO·B₂O₃ via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950℃. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO-SiO₂-Al₂O₃-B₂O₃ (M=Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al₂₀B₄O₃₆, CaAl₂Si₂O₈, and BaAl₂Si₂O₈ and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.     

Synthesis, Characterization and Calorimetry of Ni（C4H8N2O3）2Cl2

A coordination complex was synthesized from NiCl2 and dipeptide glycylglycine（GG）. It was characterized by element analysis, NMR and TG methods, and then was determined to be Ni（C4HsN2O3）2Cl2. Using an isoperibolic reaction calorimeter, the standard molar enthalpy of formation of Ni（GG）2Cl2（solid） has been determined to be -（1 674.66±2.02） kJ · mol^-1 at 298.15 K.     

Preparation and luminescence properties of monodisperse silica/aminosilane-coated Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Yb,Ho upconversion nanoparticles

Monodisperse silica/aminosilane-coated Y 2 O 3:Yb,Ho nanoparticles are prepared via homogenous precipitation combined with a polyvinylpyrrolidone-assisted ammoniation method.The factors that contribute to the success of the coating are examined,and the procedure is optimized.Compared with uncoated nanoparticles,coated nanoparticles exhibit an increased ratio of green to red emission intensity,which can mainly be attributed to the decreased number of surface defects induced by the surface coating.     

Preparation and radar-absorbing properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript>/Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/Yb<Subscript>2</Subscript>O<Subscript>3</Subscript> composite powder

Al₂O₃/TiO₂/Fe₂O₃/Yb₂O₃ composite powder was synthesized via the sol-gel method. The structure, morphology, and radar-absorption properties of the composite powder were characterized by transmission electron microscopy, X-ray diffraction analysis and RF impedance analysis. The results show that two types of particles exist in the composite powder. One is irregular flakes (100-200 nm) and the other is spherical Al₂O₃ particles (smaller than 80 nm). Electromagnetic wave attenuation is mostly achieved by dielectric loss. The maximum value of the dissipation factor reaches 0.76 (at 15.68 GHz) in the frequency range of 2-18 GHz. The electromagnetic absorption of waves covers 2-18 GHz with the matching thicknesses of 1.5-4.5 mm. The absorption peak shifts to the lower-frequency area with increasing matching thickness. The effective absorption band covers the frequency range of 2.16-9.76 GHz, and the maximum absorption peak reaches -20.18 dB with a matching thickness of 3.5 mm at a frequency of 3.52 GHz.     

Near-infrared to visible up-conversion emissions of Er^3＋ doped Al2O3 powders derived from the sol-gel method

The Er3 doped Al2O3 powders were prepared by the sol-gel method using the aluminium isopropoxide [Al(OC3H7)3]-derived Al2O3 sols with addition of the erbium nitrate [Er(NO3)3.5H2O]. The different phase structure, including three crystalline types of (Al,Er)2O3 phases, γ, θ, α, and two Er-Al-O phases, ErAlO3 and Al10Er6O24, was obtained with the 1 mol% Er3 doped Al2O3 powders at the different sintering temperatures of 600―1200℃. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the 2H11/2, 4S3/2→4I15/2 and 4F9/2→4I15/2 transitions of Er3 , were detected by a 978 nm semiconductor laser diodes excitation. The phase structure and OH content had evident influence on the up-conversion emissions intensity. The maximum intensities of both the green and red emissions were obtained respectively for the Er3 doped Al2O3 powders sintered at 1200 ℃, which was composed mainly of α-(Al,Er)2O3, less of ErAlO3 and Al10Er6O24 phases, and with the least OH content. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er3 doped Al2O3 powders.     

Giant magneto-optical faraday effect of nanometer Fe-In<Subscript>2</Subscript>O<Subscript>3</Subscript> granular films

The giant magneto-optical Faraday effect of nanometer ferromagnetic metal-semiconductor matrix Fe-ln2O3 granular films prepared by the radio frequency sputtering are studied. The result shows that the Faraday rotation angle θF value of the granular film samples with Fe volume fraction x = 35% is of the order of 10^5（°）/cm at room temperature. Temperature dependence of the Faraday rotation angle θF of Fe0.35（In2O3）0.65 granular films shows that θF value below 10 K increases rapidly with the decrease of the temperature, and when T= 4.2 K, θF value is 106（°）/cm. Through the study of the dependence of low field susceptibility on temperature and the hysteresis loops at different temperatures, it has been found that when the temperature decreases to a critical point Tp = 10 K, the transformation of state from ferro-agnetic to spin-glass-like occurs in Fe0.35（In2O3）0.65 granular films. The remarkable increase of the Faraday rotation angle θF value of Fe0.35（In2O3）0.65 granular films below 10 K seems to arise from the sp-d exchange interaction of the granular film samples in the spin-glass-like state.     

Structural and electrical properties of HCl-polyaniline-Ag composites synthesized by polymerization using Ag-coated (NH4)2S2O8 powder

Ag nanoparticles were sputter-deposited on ammonium persulfate ((NH₄)₂S₂O₈) powder to obtain (NH₄)₂S₂O₈-Ag powder, which was used to synthesize the HCl-doped polyaniline-Ag (HCl-PANI-Ag) composite via a polymerization procedure. The Ag nanoparticles were dispersed in the HCl-PANI matrix, and their sizes mainly ranged from 3 to 6 nm. The Ag nanoparticles did not affect the structure of emeraldine salt in the composite, and they increased the ordered crystalline regions in the HCl-PANI matrix. The HCl-PANI-Ag composite had a conductivity of (6.8 ±0.1) S/cm, which is about four times larger than that of the HCl-PANI. The charge transport mechanism in the composite is explained by the three-dimensional Mott variable-range hopping (3D-Mott-VRH).     

Synthesis and modification of well-ordered layered cathode oxide LiNi<Subscript>2/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript>

Oxalic-acid-based co-precipitation method was employed to prepare LiNi_2/3Mn_1/3O₂ sample with a high-ordered structure. Li⁺, Ni²⁺ and Mn²⁺ acetates were used as starting materials. The influence of the amount of lithium source in the starting materials on Li⁺ content, disorder of Li⁺-Ni²⁺ ions, and electrochemical performance has been investigated. Rietveld refinement shows that the sample prepared with 20% excess Li-source in the starting materials exhibits a perfect ordered structure. A specific discharge capacity is as high as 172 mAh/g at C/20 in the voltage range of 4.35–2.7 V. However, the cyclability is not satisfactory: about 25.3% fade in capacity was observed over 50 cycles. Chemically stable SiO2 was coated on the surface of LiNi_2/3Mn_1/3O₂ particles. A significant improvement in cyclability was attained with 3 wt% SiO2 coating, which is ascribable to the protection of LiNi_2/3Mn_1/3O₂ particles from being dissolved into the electrolyte.     

Electrochemical performance of a nickel-rich LiNi<Subscript>0.6</Subscript>Co<Subscript>0.2</Subscript>Mn<Subscript>0.2</Subscript>O<Subscript>2</Subscript> cathode material for lithium-ion batteries under different cut-off voltages

A spherical-like Ni_0.6Co_0.2Mn_0.2(OH)₂ precursor was tuned homogeneously to synthesize LiNi_0.6Co_0.2Mn_0.2O₂ as a cathode material for lithium-ion batteries. The effects of calcination temperature on the crystal structure, morphology, and the electrochemical performance of the as-prepared LiNi_0.6Co_0.2Mn_0.2O₂ were investigated in detail. The as-prepared material was characterized by X-ray diffraction, scanning electron microscopy, laser particle size analysis, charge-discharge tests, and cyclic voltammetry measurements. The results show that the spherical-like LiNi_0.6Co_0.2Mn_0.2O₂ material obtained by calcination at 900℃ displayed the most significant layered structure among samples calcined at various temperatures, with a particle size of approximately 10 μm. It delivered an initial discharge capacity of 189.2 mAh·g-1 at 0.2C with a capacity retention of 94.0% after 100 cycles between 2.7 and 4.3 V. The as-prepared cathode material also exhibited good rate performance, with a discharge capacity of 119.6 mAh·g-1 at 5C. Furthermore, within the cut-off voltage ranges from 2.7 to 4.3, 4.4, and 4.5 V, the initial discharge capacities of the calcined samples were 170.7, 180.9, and 192.8 mAh·g-1, respectively, at a rate of 1C. The corresponding retentions were 86.8%, 80.3%, and 74.4% after 200 cycles, respectively.     

分子印迹磁性荧光复合微球的制备及其性能研究

复杂生物体系中蛋白质的高效分离分析在生物分离、蛋白质纯化与检测等生命科学研究领域中具有重要的意义.本文以磁性荧光复合微球（Fe₃O₄MNP-ZnSQDs）为载体,利用表面印迹技术在Fe₃O₄MNP-ZnSQDs表面构建"核-壳"结构的磁性荧光蛋白印迹微球（Fe₃O₄MNP-ZnSQD@MIPs）,并用于溶菌酶蛋白的快速分离.结果表明,制备的Fe₃O₄MNP-ZnSQD@MIPs具有分散性好、粒径均一、荧光发射强、磁响应明显等特点.在最优条件下,该印迹微球在15 min达到吸附平衡,最大吸附容量可达645.76 m g· g-1,饱和磁强度为40 em u· g-1,且具有良好的选择性,印迹因子为2.15.该磁性荧光分子印迹微球成本低、耗时短、使用简单、吸附量高且选择性好,可用于大批量样品检测中溶菌酶的快速分离与纯化.