精纺毛型织物中纱线表观直径探讨

讨论了精纺毛型织物中纱线表观直径3种分布状态，将织物分为两大类，分析经纬纱交织点处和孔隙处表观直径之间与理论直径之间的关系；给出了表观直径与织物结构参数间的关系；利用多元统计分析方法建立了表观直径与织物结构参数之间的关系方程，验证结果表明：除纬向化纤长丝对方程有较大的误差平均误差率大于23％之外，方程对其范围内的织物平均误差控制在10%以内。     

Characterization of Deformations of Multiaxial Warp Knitted Fabrics during Forming Process

The typical structure(with four inserting yarn systems) of multi-axial warp knitted fabrics shows unsatisfactory conformability according to hemisphere pressing experi-ments.The structure containing only two bias inserting yarn systems(TBMWK fabric),however,proves to possess good conformability.This paper characterized in detail the forming behavior of TBMWK fabric.It was found that the two bias inserting yarn systems tend to gather always along the weft direction,and the angles between them along this direction are basically linear to the perpendicular distances from the measured points to the longitudinal axis of the hemisphere.And the     

Absorption and Permeability of Air-jet Textured Glass Fiber Yarn and Its Fabric for Resin

The Absorption and permeability of air-jet textured glass fiber yarn and its fabric and bonded tenacity of the fabric have been studied in relation to the main parameters, air supplied pressure and overfeed ratio. It has been observed that increasing the level of main parameters improves the coated ratio of the textured yarn and its fabric as well as the bonded tenacity of the fabric made of textured yarn. Comparison of absorption or permeability between textured and supplied yarns, and comparison of absorption or permeability and bonded tenacity between the two kinds of fabrics have been elucidated.     

Three-Dimension Parametric Simulation of Knitted Fabric Based on the Twisted Loop Model

To enhance the realistic simulation effect of knitted fabric, a new three-dimension （3D） twisted loop model was proposed. This model was constructed by using Non-uniform Rational B-Spline （NURBS） surface. The control points of this surface were generated through rotating the cross-section along the center path of yarn. The cross-section of yarn was generated based on the two-level hexagonal ~lose packing model. Both of the center path and the cross-section were fitted by NURBS. With this twisted loop model, 3D parametric simulation of knitted fabric was realized in 3DS MAX by utilizing MAXScript and analyzing the relationships between structure parameters （including the wale-spacing, the course-spacing, the yarn diameter, .and the fabric thickness） and geometric model. The simulation of knitted fabric has 3D realistic twist effect dearly. Furthermore, the structure parameters and the twist parameters of fabric can be modified interactively.     

经编间隔织物压缩性能的实验研究及计算机仿真

目的改善经编间隔织物结构设计粗放化、经验化的现状,为在给定工作应力下的经编间隔织物结构参数设计提供基础。方法从平板压缩和球形压缩试验开始,探讨织物结构参数(如间隔纱细度、面密度、垫纱角度等)对织物压缩性能的影响,给出织物的缓冲特性曲线,并建立了计算机仿真有限元模型。结果仿真计算显示,理论计算结果与试验数据基本吻合。结论该有限元模型可用于经编间隔织物的结构参数设计。     

纱线均匀度指标离散率及与织物外观质量的关系

本文根据离散率的定义,讨论了离散率的意义,由所假设的随机纱条的条件,推导了随机纱条的离散率公式和近似的计算式.并用18.2 tex(32°)普梳纯棉纱做了纱线均匀度与针织物和机织物外观质量之间的对照试验,且对实验结果进行了分析。     

Strength Properties of 3D Solid Orthogonal Panel Fabrics

IntroductionWith the development of high performance fiber andtextile perform manufacturing technology, fiber reinforcedcomposite materials are getting more and more attractivebecause they have many advantages such as their highstiffness and strength at low density, high specific energyabsorption behavior, and excellent fatigue performance.Therefore they are frequently used in a wide variety ofapplications[1], although most of them are two dimensional(2D) laminated comp…     

Prediction Method for Tensile Property of Woven Fabrics in Lower Loads

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｔｅｎｓｉｌｅｐｒｏｐｅｒｔｙｏｆｆａｂｒｉｃｓｉｎｌｏｗｅｒｌｏａｄｓｉｓｖｅｒｙｉｍｐｏｒ ｔａｎｔ,ｉｔａｆｆｅｃｔｓｔｈｅｆｏｒｍａｂｉｌｉｔｙ ,ｃｏｍｆｏｒｔａｂｌｅａｂｉｌｉｔｙａｎｄｈａｎｄｌｅｏｆｇａｒｍｅｎｔｓ Ｔｈｉｓｐｒｏｐｅｒｔｙｓｈｏｕｌｄｂｅａｓｃｅｒｔａｉｎｅｄａｃｃｕｒａｔｅｌｙｂｙａｂｉ ａｘｉａｌｌｏａｄ ｄｅｆｏｒｍａｔｉｏｎｍｅａｓｕｒｅｍｅｎｔｂｅｃａｕｓｅｔｈｅｗｏｖｅｎｆａｂｒｉｃｓａｒｅａｋｉｎｄｏｆａｎｉｓｏｔｒｏｐｙｍ…     

基于花式纱线结构的抗静电羊绒织物的开发

以涤纶基导电长丝为芯纱、锦纶低弹丝为固结纱、羊绒粗纱经牵伸后为饰纱,开发了4种抗静电羊绒花式纱线（花式平线、波形线各2种）,并分别制成纬平织物.对织物的抗静电性能进行测试,对比试验结果表明,抗静电羊绒花式纱线织物的电荷面密度仅为同线密度纯羊绒织物的1/8.同时分析了花式纱线的结构和包缠捻度的大小对织物抗静电性能的影响,研究发现：花式平线的导电效果优于波形线;随着捻度增加,由抗静电羊绒花式纱线制成的织物电荷面密度有减小的迹象.     

Analysis of the Porosity Changing after Moisture Absorption in Functional Knitted Fabrics

The paper analyses the effect of stitch geometricalmodality changing after moisture absorption on the porosityof knitted fabrics, and educes the formulas between porosityand stitch parameters. Regarding as the cell stitch, theincreasing of yam diameter brings the porosity decreasingand the fabric shrinking in the wale direction. While thediameter keeps invariability, the yarn elongating brings thefabric humping up as well as the increasing porosity. Theair-permeability experiments have been conducted to validatethe theoretical analysis, and there is reasonable agreementbetween the theories and experiments.     

织造和染整加工前后精梳毛纱拉伸性能的关系

为了根据织造前纱线的拉伸性能和织造、后整理工艺预测织物的拉伸性能,研究了织造和染整加工前后精梳毛纱拉伸性能的关系,获得了三方面的结论:(1)经常规后整理加工的各种精梳毛织物中经纱的伸长变形能力没有显著差异,但其纬纱的伸长变形能力与织造和染整工艺有关。(2)坯布染色情况下织造前纱线的伸长变形曲线在伸长率方向扩大一定倍数以后与织物中纱线的伸长变形曲线相当。纱线染色情况下织造前纱线的伸长变形曲线的某一部分与织物中纱线的伸长变形曲线相当。(3)后整理加工中的经向张力和拉幅张力对精梳毛织物中纱线的伸长变形能力的影响特别大。树脂整理有降低织物变形特别是变形回复能力的作用。     

单面羊毛衫添纱织物编织的研究

分析了垫纱横角和垫纱纵角对羊毛针织绒线在织物中显现情况的影响规律，推导出了横机纱线断面轨迹方程，通过上机确定了编织毛盖棉织物时较理想的垫纱角度．     

锦纶66包芯纱牛仔面料开发

使用锦纶66纤维开发高性能、高品质的牛仔面料,以粘胶为外包纤维,锦纶66或氨纶为芯丝制成36.4和28.0 tex的包芯纱为纬纱,使用剑杆织机使其与36.4和28.0 tex的纯棉纱线进行交织,制成牛仔面料。对锦纶66包芯纱和氨纶包芯纱所织制的6种牛仔面料进行色牢度、耐磨性、强力、弹性回复性、折皱回复性和弯曲性能等性能测试并进行对比分析,发现锦纶66包芯纱牛仔面料的弹性达到氨纶包芯纱牛仔面料的弹性水平,且其强力和柔软度更佳。以粘胶/锦纶66(3.33 tex/10 F)包芯纱织制面料比粘胶/锦纶66(3.33 tex/34 F)强力更大、弹性回复性更好,且更柔软。同时,采用36.4 tex纱线所织制的面料的强力、弹性和折皱回复性更好,但28.0 tex纱线所织制的面料更柔软。     

Dobby CAD系统的研究与实现

系统充分考虑了纱线的三维特性，利用纱线的光照模型，实现对纱线的模拟，考虑了浮长线对织物外观的影响，结合系统中各参数，实现了对织物外观的模拟，模拟效果具有较强的真实感。     

Influence of Wires Properties on Warp-Knitted Loop Geometry in Plane Based on Theory of Elastic Rod

Based on classic theory of elastic rod,the warp-knitted loop geometry in plane is independent of yarn properties,while there is a certain gap between the geometrical model and the actual fabrics.According to this problem,further analysis of loop geometry is done based on the theory of elastic rod with theoretical calculation and experiments.The theoretical analysis found that the distance between the contacted points at the loop root affected the loop geometry,and the distance was affected by the ratio of bending rigidity and the friction between yarns.The experiments,forming simple loop by taking the yarn as an elastic rod,found that the bending rigidity affected the loop geometry.Then the relationships between warp-knitted loop geometry in plane of metallic fabrics and wires properties were studied.The results show that metallic fabrics are more suitable for the theory of elastic rod;the friction and bending rigidity of wire yarns affect the loop geometry in plane.Also,the elongation of yarn affects the loop geometry in the actual warp-knitted fabric.     

利用长丝的结构参数计算长丝芯吸速率的方法

通过有捻长丝织物芯吸速率的测试，利用一元线性回归方法，发现有捻长丝织物芯吸速率与长丝细度的平方根和捻度之商间存在着较好的线性关系。因此该回归方程可作为计算长丝织物芯吸速率的一个经验方式。     

织物透气性与织物覆盖系数关系的研究

测试研究了六种不同纬密织物的透气量·气压差的关系，证实了空气透过织物时粘滞阻力和惯性阻力同时存在；求算了的回归方程式，相关系数一般在０．９８以上；进一步分析和计算了ａ，ｂ与复盖系数，呈不等轴双曲线关系．     

转杯纱、环锭纱及其针织物性能研究

系统地对普梳和精梳转杯纱、普梳和精梳环锭纱等4种纱线及其相应针织物的各种性能,尤其是力学性能进行了比较系统的测试分析,并对其中某些性能的差异显著性作出分析检验。     

织编物的组织结构

织编物是把机织与针织的原理相结合所生产出的一种带条纹的织物。为了深入研究织编物的特性、用以指导在设计这一类织编物时所遇到的种种问题,我们有必要对织编物的组织结构进行研究。本文就织编物的厚度与经纬纱的细度,经纬纱的密度与用纱量之间的关系,织编物的几种基本组织结构及其经纬密度的配置,以及经纬向的强力与伸长,纱线复盖度与透光及透气性的问题一一作了研究,虽然这一工作仅仅是开始,但它有助于对这类新型织物的生产研究工作,以供这方面工作的同志参考。     

VARIATION OF WOVEN FABRIC GEOMETRY——Non-uniform Flattening of Yarns

In previous research much effort has been devoted to the geometry of woven fabrics and relat-ed problems under the assumption of constant yarn configuration in fabric.This paper will first re-port that image crimp (yarn crimp measured by an image analysis method) seems larger than actualvalue.From the explanation of this result,the variation of yarn configuration in woven fabric dueto the non-uniform flattening is revealed.The significance of this actual structure of woven fabricsis discussed.It is believed that the variation of yarn configuration is very important for fabric per-formance,and may be an advantage for fabric quality.