A Contact and Non-Contact Hybrid Profilometer with Large Range

A novel hybrid instrument of contact and non-contact measurement with large range is developed, and both measurement systems are based on a Linnik interference microscope and on white-light interference measuring techniques. The ambiguity presented in conventional monochromatic interferometers is not present in the contact and non-contact measurement, and they have a virtually unlimited unambiguous range. For the contact measurement, the vertical measuring range is ±5 mm with a resolution of 1 nm and the horizontal measuring range is ±25 mm in x-range and y-range with a resolution of 1.25 μm; for the non-contact measurement, the vertical measuring range is ~5 mm with a resolution of 1 nm and the horizontal resolution better than 0.5 urn.     

Solvothermal synthesis and ferromagnetic property of bamboo-shoot-like oriented carbon micromaterials

Bamboo-shoot-like oriented carbon micromaterials (BOCMs) were synthesized by a solvothermal method at 450°C for 4 h using deoiled asphalt (DOA) as carbon source, toluene as solvent, ferrocene as catalyst precursor and amphiphilic triblock copolymer P123 as surfactant. The morphology and structure of the products were characterized by X-ray diffraction, field emission scanning electron microscopy, high resolution transmission electron microscopy and Fourier transform infrared spectroscopy. The results reveal that the obtained products have good distribution with uniform diameters of about 0.5 μm and the lengths of 1–1.5μm, and hydrogen-carbon bonds are observed on the surface of BOCMs. The growth mechanism of BOCMs is discussed, in which that the catalysis of ferrocene and the dispersion and assembly of the aromatic molecules of DOA directed by P123 are critical to the formation of the BOCMs. The coercivity value (231.91 Oe) from the measurement of a vibrating sample magnetometer shows that the BOCMs have an obvious ferromagnetic behavior.     

Experimental investigation of parallel optical data storage using pyrrylfulgide photochromic material

The optical storage characteristics of a new kind of organic photochromic material棗pyrrylfulgide were experimentally investigated in the established parallel optical data storage system. Using the pyrrylfulgide/PMMA film as a photon-mode recording medium, micro-images and encoded binary digital data were recorded, readout and erased in this parallel system. The storage density currently reaches 3?107 bit/cm2. The recorded information on the film can be kept for years in darkness at room temperature.     

Polishing technology of surface for diamond film using the method of laser ablation

Conclusion Good unity in thickness and a smooth surface of diamond film are obtained by using the methods of laser ablation and machine grind to the surface of diamond film. Compared with the machine polishing method, the polishing rate increased by over 10 times. After laser ablation and machine polishing, the thickness change and the roughness of a diamond film with 400 μm thickness and 1 cm² area are 10–15 μm and 0.05 μm, and this film is basically suitable to using in electronics.     

Preparation of protein-loaded microspheres with size≤10 μm by electrostatic droplet generation technology

AT PRESENT, ALMOST ALL PROTEIN DRUGS HAVE TO BE CLINI- CALLY ADMINISTERED VIA INJECTION ROUTES SUCH AS INTRAVE- NOUS INJECTION. ONE OF THE IMPORTANT PROBLEMS CON- FRONTED IS THAT THESE DRUGS SHOULD BE INJECTED REPEATEDLY DUE TO SHORT HALF-LIFE IN BLOOD. I…     

A bulk metal/ceramic composite material with a cellular structure

Metal/ceramic composite materials can be divided into two groups: one is ceramic reinforced metal matrix composite, and the other is metal toughened ceramic matrix composite. The research on these materials mainly focuses on the mechanical properties due …     

Characteristics of inclusions in high-Al steel during electroslag remelting process

The characteristics of inclusions in high-Al steel refined by electroslag remelting (ESR) were investigated by image analysis, scanning electron microscopy (SEM), and energy-dispersive spectrometry (EDS). The results show that the size of almost all the inclusions observed in ESR ingots is less than 5 μm. Inclusions smaller than 3 μm take nearly 75% of the total inclusions observed in each ingot. Inclusions observed in ESR ingots are pure AlN as dominating precipitates and some fine spherical Al₂O₃ inclusions with a size of 1 μm or less. It is also found that protective gas operation and slag deoxidation treatment during ESR process have significant effects on the number of inclusions smaller than 2 μm but little effects on that of inclusions larger than 2 μm. Thermodynamic calculations show that AlN inclusions are unable to precipitate in the liquid metal pool under the present experimental conditions, while the precipitation of AlN inclusions could take place at the solidifying front due to the microsegregation of Al and N in liquid steel during solidification.     

Field emission characteristics of ZnO nanotetrapods and the effect of thermal annealing in hydrogen

Large-scale tetrapod-like ZnO nanostructures have been synthesized using a thermal chemical vapor deposition method on a silicon substrate. The high-purity nanotetrapods show sharp tips geometry with a wurtzite structure. The field emission properties of the uniform ZnO nanostructural material are investigated at different anode-cathode distances. The turn-on field for the ZnO nanotetrapods is found to be about 3.7 V/μm at a current density of 1 μA/cm^2. The field emission behavior obeys Fowler-Nordheim relationship. More importantly, the field emission properties are improved after annearing in hydrogen, and therefore high emission current and low turn-on field are obtained. These results indicate that tetrapod-like ZnO nanostructures are a promising candidate for cold cathode emitters.     

Determination of copy number for 5S rDNA and centromeric sequence RCS2 in rice by Fiber-FISH

The copy number of 5S rDNA and centromeric sequence RCS2 was determined by extended DNA fiber based fluorescence in situ hybridization (Fiber-FISH) in rice (Oryza sativa ssp. indica cv. Guangluai No. 4) genome. In order to determine the copy number, it is necessary to know the basepair number that a given length DNA fiber contains under a microscope. Therefore, the length of two DNA fragments, in which the basepair number had been already known, was measured. The insert sequence of the tested BAC 38D17 was 136 kb and its extended DNA was 56.4 μm long, 2.41 kb/μm on average, while that of the tested BAC 44B4 was 144.5 kb in total and 55.7 μm long, 2.60 kb/μm on average under the microscope. They were very close to the theoretical value of B-DNA in the Watson-Crick DNA model, which is 2.97 kb/μm. According to the average value of basepair number per μm of the two samples mentioned above, that is, 2.51 kb/μm, it could be estimated that the copy number was about 686 for 5S rDNA and 286-1121 for the centromere sequence RCS2.     

Handheld optical coherence tomography device for photodynamic therapy

Photodynamic therapy (PDT) is a very effective treatment for port wine stains (PWS). To guide and assess PDT treatment, a handheld optical coherence tomography (OCT) probe was designed for real-time imaging of the PWS patient. The system uses a light source with a center wavelength of 1310 nm, -3 dB bandwidth of 90 nm and an optical power of 9 mW. The system also has a spatial resolution of 8 μm (lateral) × 7 μm (axial), an imaging rate of 4 frames per second, and a 102 dB sensitivity. We then demonstrate that the OCT imaging system can clearly distinguish between normal and PWS tissues. Therefore, the system can provide valuable guidance for PDT treatment.     

Impact of cloud inhomogeneity on bi-directional reflectance

This paper uses SHDOM （Spherical Harmonics Discrete Ordinate Method） to calculate the nadir bidirectional reflectance distribution function （BRDF） of the cumulus and stratocumulus fields at the wavelengths of 0.67 μm and 2.13 μm, and discusses the impact of cloud inhomogeneity on BRDF. The cloud fields are adopted from 13RC Phase Ⅱ, which are used to compare 3D radiative transfer models. The simulation results show that the cu field has 6% abnormal BRDF values （BRDF〉1） with the increase of solar zenith angle. Further analyses show that grid cells whose BRDF is greater than one gather together at the local trough of the top of cloud. These regions can receive not only the direct incident solar beam, but also the beam scattered by the higher cloud of its neighborhood. Hence, the BRDF of those regions is enhanced. The abnormal BRDF phenomenon shows that the cloud inhomogeneity can result in inconsistency between satellite observation and plane parallel theory, implying that the reflectance observed by high resolution satellite is maybe enhanced by the cloud 3D effects. Thus one should take this fact into account when using the product retrieved by these data. The dominant solar zenith angles are quite large in the mid-high altitude area, and the impact of cloud inhomogeneity on these areas may be more significant.     

An investigation on supercooling directional solidification process of Cu-Ni single phase alloy

Supercooling directional solidification (SDS) is put fotward by combination of melt supercooling and conventional solidification by application of supercooling inheritance. On the self-designed SDS equipment, SDS of Cu-Ni alloy was achieved successfully The results are as follows f (i) The primary arm spacing is about 30 μm, the growth of secondary arms are strongly suppressed. The primary arm spacing is nearly the same as LMC method (GL=25 K/mm, V=500 pm/s), the primary stems are straight, fine and completed. with an inclination angle of about 5.8° (ii) A semi-quantitative T-T model is brought fotward to describe the dendrite growth rate V vs. undercooling AT The prediction of T-T model agrees well with experimental results. The formation of fine equiaxed dendrites, transition region and dendrite region can be explained successfully by △T-V-x relation of T-T model.     

Underwater holmium-laser-pulse-induced complete cavitation bubble movements and acoustic transients

The complete evolution of holmium-laser-pulse-induced cavitation bubble movements and acoustic transients underwater are investigated experimentally. The laser was single fiber-guided and had a 300 mJ pulse energy and 300 μs pulse duration (full width at half-maximum). In our experiments, more than four oscillations and four acoustic transients were demonstrated. 272 μs after laser onset, the cavitation bubbles reached their maximum transverse and longitudinal lengths of 2046 and 1914 μm, respectively. The maximum transverse and longitudinal bubble wall velocities were 28.9 and 39.2 m/s at 560 and 528 μs after laser onset, respectively. This investigation will be helpful to make good use of cavitation effect in medical applications of holmium laser pulses.     

Porosity and permeability evolution and evaluation in anisotropic porosity multiscale-multiphase-multicomponent structure

Based on the hybrid hypersingular integral equation-lattice Boltzmann methods (HHIE-LBM), the porosity and permeability evolution and evaluation process in anisotropic saturated porosity multiscale-multiphase-multicomponent (ASP-MS-MP-MC) structures under ultra high temperature and pressure conditions was analyzed on parallel CPU and GPU platforms. First, virtual physical models at multi-spatial scales (2 μm, 5 μm and 10 μm) were restructured by computerized microtomography technology and data. Second, using HHIE-LBM methods, the anisotropic porosity and permeability tensor at core level and pore level under ultra high temperature and pressure conditions were calculated. Third, the evolution and evaluation process of the porosity and permeability as a function of multi temporal spatial scales was investigated. Finally, the relationship between porosity and permeability and ASP-MS-MP-MC structures (micro-meso-macro-scale) was explored.     

相移数字全息成像孔径合成数值模拟

提出相移数字全息中以子图拼接扩大等效芯片尺寸来提高分辨率的方法。使用相关方法拼接了相移数字全息中4幅子图,扩大了记录范围,提高了成像分辨率。以4条5微米宽的狭缝为实验物体进行了模拟实验。结果表明,文中孔径合成技术能够明显提高系统成像分辨率,经孔径合成后分辨宽度小于5微米。     

<Emphasis Type="Italic">In-situ</Emphasis> trace element analyses of zircons from Dabieshan Huangzhen eclogite: Trace element characteristics of eclogite-facies metamorphic zircon

The internal structures of zircons in eclogite from Huangzhen have been studied by cathodoluminescence (CL) microscopy. Two growth stages were distinguished: protolith magmatic cores and metamorphic overgrowth rims. These different domains were analyzed for trace elements using LAM-ICP-MS. The protolith and the overgrowth zircons have different trace elements characteristics. The trace element contents of protolith zircons are high and very variable. The overgrowth zircons show a typical trace element feature of equilibrium with garnet, e.g. low contents of HREE (132.2–197.6 μg/g) and small differential degree of HREE ((Yb/Gd)_CN=8.6–11.9). The contents of Nb, Ta and the ratio of Nb/Ta are lower in the metamorphic domains (0.5–1.4 μg/g, 0.7–1.5 μg/g, 0.3–1.3, respectively) than in the protolith domains (3.8–19.7 μg/g, 2.7–12.1 μg/g, 1.0–4.6, respectively). This is the first time to give the evidence that the metamorphic zircon equilibrates with the rutile, which formed during the peak metamorphic stage. The REEs and other trace elements data demonstrate that the metamorphic zircons overgrow in the eclogite-facies conditions. The trace element composition of zircon can therefore give new ways to constrain their formation conditions.     

Evaluation of virus removal in MBR using coliphages T4

A membrane bioreactor (MBR) with gravity drain was tested for domestic wastewater for 65 days. Resultss howed that the effluent quality was excellent, and met with the reuse water standard of China (GB/T 18920-2002). Virus removal in the membrane separation process was investigated by employing coliphages T4 as a tracer. Two microfiltration membrane modules, with pore sizes of 0.22 and 0.1 μm, were used to investigate their effects on virus rejection at the transmembrane pressure of 8.5 kPa. It was found that 0.1 μm membrane had complete rejection of virus, and 0.22 μm membrane had significant rejection of virus. In the longterm operation of this MBR, no significant difference was observed between both pore sizes because the virus concentrations of the effluent in both cases were in the same order. Effluent virus concentration at steady state of MBR running was less than 2 PFU/mL. The removal ratios of coliphage T4 in MF processes were more than 10^5.5. The membrane surface deposits played an important role in the rejection of virus. The formation of cake clay on the membrane surface was the main cause of high rejection of colipbage T4 with MF of 0.22 μm.     

Novel high PSRR current reference based on subthreshold MOSFETs

This paper takes full advantages of the I-V transconductance characteristics of metal-oxide semiconductor field effect transistor （MOSFET） operating in the subthreshold region and the enhancement pre-regulator technique with the high gain negative feedback loop. The proposed reference circuit, designed with the SMIC 0.18 μm standard complementary metal-oxide semiconductor （CMOS） logic process technology, exhibits a stable current of about 1.701 μA with much low temperature coefficient （TC） of 2.5×10^-4μA/℃ in the temperature range of-40 to 150℃ at 1.5 V supply voltage, and also achieves a best PSRR over a broad frequency. The PSRR is about - 126 dB at DC frequency and remains -92 dB at the frequency higher 100 MHz. Moreover the proposed reference circuit operates stably at the supply voltage higher 1.2 V and has good process compatibility.     

Fast formation of NaA zeolite membrane in the microwave field

NaA zeolite membrane was successfully synthesized on the porous α-Al₂O₃ support by microwave heating. The synthesis of NaA zeolite membrane in the microwave field only needs 15 min and the synthesis time is 10 times shorter than that by conventional heating. SEM characterization indicates that the zeolite crystals in the NaA zeolite membrane synthesized by microwave heating are uniform in size; the membrane thickness is about 4 μm and is thinner than that of the NaA zeolite membrane synthesized by conventional heating. Gas permeation studies indicate that the permeances of the NaA zeolite membrane synthesized by microwave heating are 3–4 times higher than those of the NaA zeolite membrane synthesized by conventional heating, while their permselectivities are comparable.     

Fabrication and structural characterization of large-scale uniform SnO<Subscript>2</Subscript> nanotube arrays by sol-gel method

Semiconductor SnO2 nanotube arrays were fabricated by sol-gel method based on highly ordered nanoporous anodic alumina membrane. Their microstructures were characterized by scanning electron microscopy,transmission electron microscopy, selective electron diffraction spectroscopy and X-ray diffraction. Results indicated that SnO2 nanotubes have a thickness of about 20-30 nm,and a diameter of about 100-200 nm. The length of the nanotubes is about 1 μn, XRD and SEDS indicated that these SnO2 nanotubes are polycrystalline.