Identification and functional analysis of 23 novel box C／D snoRNAs from Oryza sativa

In a cDNA library generated from rice small nuclear RNAs,30box C/D small nucleolar RNAs (snoRNAs) were identiffied through preliminary screen.Except 7 known snoRNAs such as U14,all snoRNAs were identified in rice for the first time experimentally.Among the 23 novel snoRNAs,11 snoRNAs appear rice-specific,6 snoRNAs are unique to plants,the remaining 6 snoRNAs have their counterparts in both Arabidopsis and yeast or mammals according to the conserved antisense sequencs that guide 2‘-O-ribose methylation of rRNA,17 of the 23 novel snoRNAs were predicted to guide 24 2‘‘-O-ribose methylations at the specificsites of rice 5.8S,18S,25S rRNAs,among which 19 methylated sites were determined by primer extension at low dNTP concentrations.The remaining 6 snoRNAs devoid of rRNA antisense elements may represent novel snoRNA species in rice.The results show that constructing a cDNA library from small nuclear RNAs is an effective experimental approach for novel snoRNA is identification.The novel snoRNAs are important in elucidating the genomic organization and expression of plant snoRNA genes and the mechanism through which 2‘‘-O-ribose methylations took place in rRNAs.     

Synthesis and performance of Ca-α/β-SiAlON composites from tailings

Ca-α/β-SiAlON composites were prepared using Ca-α/β-SiAlON powder synthesized from gold ore tailings, which contained abundant Si and Al elements as the major raw materials together with minor additives, through a pressure-less sintering method. The influences of sintering temperature on the phase composition and microstructure of the composites were analyzed. The scanning electron microscopy images of the composites show the interlacing of grains with elongated columnar, short columnar and plate-like morphologies. The composites sintered at 1520℃ for 6 h have a flexural strength of 352 MPa, Vickers hardness of 11.2 GPa, and fracture toughness of 4.8 MPa·m1/2. The relative content of each phase in the products is I(Ca-α-SiAlON):I(β-SiAlON):I(Fe₃Si) = 23:74:3, where I_i stands for the diffraction peak intensity of phase i.     

Microstructural evolution of titanium matrix composite coatings reinforced by in situ synthesized TiB and TiC by laser cladding

<正>Titanium-based composite coatings reinforced by in situ synthesized TiB and TiC particles were successfully fabricated on Ti6Al4V by laser cladding using Ti-B_4C-Al or Ti-B_4C-C-Al powders as the precursor materials.The microstructural and metallographic analyses were made by X-ray diffraction(XRD),optical microscope(OM),scanning electron microscopy(SEM),and electron probe microanalysis (EPMA).The results show that the coatings are mainly composed ofα-Ti cellular dendrites and a eutectic transformation product in which a large number of coarse and fine needle-shaped TiB and a few equiaxial TiC particles are homogeneously embedded.A thin dilution zone with a thickness of about 100μm is present at the interface,and it consists of a few TiB and TiC reinforcements and a large number of lamella grains growing parallel to the heat flux direction in which a thin needle-shaped microstructure exists due to the martensitic transformation. The microstructural evolution can be divided into four stages:precipitation and growth of primaryβ-Ti phase,formation of the binary eutecticumβ-Ti+TiB,formation of the ternary eutecticumβ-Ti+TiB+TiC,and solid transformation fromβ-Ti toα-Ti.     

Regulation of canonical Wnt/β-catenin pathway in the nucleus

Canonical Wnt/β-catenin pathway plays a central role in development, homeostasis, as well as tumorigenesis. The regulation of the pathway involves various and complicated mechanisms, including the extracellular, intracellular and endonuclear regulation. As the key component of the pathway, the Lefl/Tcfs-β-catenin complex is also the key target of regulation in the nucleus. In the current review, we are going to summarize the regulators in the nucleus which can modify the transcrip- tional activity of the Wnt/β-catenin pathway.     

Synthesis and Structure of Polypyrrole Derivatives／V2O5 Nanocomposites

Poly ( N, N, N-trimethyl ( 2-pyrrol-l-yl ) ethyl ammonium iodide )/V2O5 ( PTPAI/V2O5) nanocomposites were synthesized by sol-gel method. This method involved formation of vanadium pentoxide xerogel in the prcscnce of polypyrrole derivatives solution. X-ray diffraction(XRD) indicated that the polypyrrole derivative particles encapsulated in the fibrous V2O5 network and the layered distance significantly increased from 1. 077 39 to 1. 354 56 nm. The interaction between polypyrrole and V2O5 in the ‘nanocomposites‘ was characterized by IR spectroscopy. The Scanning Electron Microscope(SEM) micrographs reveal the structural contrasts between the hybrid materials and the pristine vanadium oxide xerogel.     

尾矿絮凝沉降的温度变化特征及其机理

Rapid flocculation and settlement (FS) of mine tailings is significant for the improvement and development of the filling process, whereas the settlement velocity (SV) of tailings in FS has been recognized as a key parameter to evaluate the settlement effect. However, the influence of temperature on the SV and its mechanism have not been studied. FS experiments on tailings with various ambient temperatures were carried out. The SVs of tailings with a solid waste content of 10wt% and an anionic polyacrylamide content of 20 g·t?1 were measured at different temperatures. The SV presented an “N”-shaped variation curve as the temperature changed from 5 to 40°C. The mechanism of these results can be explained from the perspective of the electric double-layer repulsive force, molecular dynamics, and the polymer flocculation principle, as revealed from the scanning electron microscopy of floc particles. The findings will be beneficial in the design of tailings dewatering processes and save costs in the production of cemented paste backfill.     

联■唑啉类手性配体在不对称氢迁移反应中的应用

Four chiral iridium(Ⅰ) complexes are synthesized from bioxazoles and [Ir(COD)Cl]2 (COD=1, 5- cyclooctadiene in situ. The complexes are used as enantioselective catalysis in the asymmetric hydrogen transfer reactions of acteophenone. It is found that the highest opticalyeild is up to 31.5%.     

Synthesis, characterization and magnetic properties of near monodisperse Fe3O4 sub-microspheres

Near monodisperse Fe3O4 sub-microspheres with an average diameter of 170 nm have been synthesized by a solvothermal reduction method, using K3[Fe（CN）6] as the raw material in the absence of any surfactants at 200~C℃ for 24 h. The products were detected by XRD, FESEM, TEM, and XPS. The investigation of the reaction parameters indicates that ethylene glycol plays a key role both as reducing agent and solvent. In addition, the reaction time and temperature also have important influences on the final product. The hysteresis loop of the near monodisperse Fe3O4 sub-microspheres shows a ferromagnetic behavior with saturation magnetization of 60.8 emu/g and coercivity of 124.7Oe.     

Down-regulation of αGal epitopes by co-transfection of α1,3-galactosidase gene and α1,2–fucosyltransferase gene

The polycarbohydrate structure of Galα1- 3Ga1β1-4GluNAc-R （known as αGal epitopes of xenoantigen）, produced by α1-3-galactosyltransferase （α1,3-GT） in the course of animal development, is the major xenoantigen on the cell surface of porcine which causes hyperacute rejection in pig-to-human xenotransplantation. Alpha-1,3-galactosidase （AGL）, a hydrolytic enzyme, can remove the terminal α1,3-galactosyi from the Galα1-3Galβ1-4GluNAc-R structure resulting in cleaning αGai epitopes from the porcine cells. Aipha-1,2-fucosyitransferase （HT） can modify the surface carbohydrate phenotype of porcine cells, bringing about reduction of αGai epitopes expression. In this study, human AGL and HT gene were co-transfected to porcine fetal fibroblast （PFFb） in equimolar concentration to reduce the xenoantigen. Gene and protein of hAGL and HT were both detected to express at high level by RT-PCR and Western blot, respectively. There was an 84% reduction in αGai xenoantigen and an 82% increase in H antigen as assayed by flow cytometry in the AGL and HT gene co-transfected PFFb. The number and morphology of transgenic PFFb chromosome were normal. Findings indicate that Galα1-3Gal epitopes of PFFb could be down regulated by AGL and HT co-transfection without deleterious effects on the chromosomal profile of the transgenic ceil.     

Agglomerating Growth of One-Dimensional Carbon Nano-Materials Synthesized from Ethanol Flames

One-dimensional carbon nano-materials （ODCNMs） synthesized from ethanol flames exhibit various agglomerated morphologies, such as ＂chrysanthemum-like＂, ＂hairball-like＂ or ＂orange-peel-like＂, ＂vertically aligned＂ and ＂wrinkling-pileup＂. The present work studied the agglomerating process and the growth mechanism by using scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. It is thought that the size and distribution of the catalyst particles produced from pretreatment of the substrates play a key role during the formation of agglomerations. It is expected that the steady growth of ODCNMs in flames will be improved through the preparation of the catalysts.     

Preparation of β-SiC by combustion synthesis in a large-scale reactor

The feasibility of 5 kg β-SiC synthesized in one batch was demonstrated through igniting the mixture of Si, C-black and polytetrafluoroethylene (PTFE) under different nitrogen pressures. The effect of experimental parameters, including the contents of PTFE, nitrogen pressure, preheating, and raw materials distribution forms were investigated. The results show that the products are β-SiC with equiaxed grains. The average grain size is less than 200 nm. The powders loaded loosely promote reaction heat dispersing, resulting in small grains. High purity β-SiC powders are obtained when the PTFE content is as low as 5wt%, which simplifies the process and decreases the cost effectively. The ceramic sintered from the obtained β-SiC powders presents the hardness of 22.20 GPa, the bending strength as high as 715.15 MPa and the fracture toughness of 8.179 MPa·m1/2, which are higher than those of ceramics fabricated with α-SiC produced by combustion synthesis.     

Morphology of α-Si3N4 in Fe–Si3N4 prepared via flash combustion

The state and formation mechanism ofα-Si3N4 in Fe–Si3N4 prepared by flash combustion were investigated by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The results indicate thatα-Si3N4 crystals exist only in the Fe–Si3N4 dense areas. When FeSi75 particles react with N2, which generates substantial heat, a large number of Si solid particles evaporate. The prod-uct between Si gas and N2 is a mixture ofα-Si3N4 andβ-Si3N4. At the later stage of the flash combustion process,α-Si3N4 crystals dissolve and reprecipitate asβ-Si3N4 and theβ-Si3N4 crystals grow outward from the dense areas in the product pool. As the temperature decreases, the α-Si3N4 crystals cool before transforming into β-Si3N4 crystals in the dense areas of Fe–Si3N4. The phase composition of flash-combustion-synthesized Fe–Si3N4 is controllable through manipulation of the gas-phase reaction in the early stage and theα→βtrans-formation in the later stage.     

Effects of alloying and high-temperature heat treatment on the microstructure of Nb–Ti–Si based ultrahigh temperatur e alloys

The phase co mpositions, microstructure and especi ally phase i nterfaces in the as-cast and heat-treated Nb– Ti–Si based ultrahigh temperature alloys have been investigated. It is shown that β(Nb,X)5Si3 and γ(Nb,X)5Si3 are the primary p hase s in the Nb–22Ti–16Si–5Cr–5Al (S1) (at%) and Nb–20Ti–16Si–6C r–4Al–5Hf–2B–0.06Y (S2) (at% ) alloys, respectively. The Nb solid solution (Nbss) is the primary phase in Nb–22Ti–14Si–5Hf–3Al–1. 5B –0.0 6Y (S3) (at%) alloy . An orientation relationship between Nbss and γ(Nb,X)5Si3 was determine d to be (1-10)Nb//(101-0)γ and [111]Nb//[0001]γ in the as-cast S2 and S3 alloys. Some original β(Nb,X)5Si3 transfor med into α(Nb,X)5Si3 because Al and Cr diffused from the β(Nb,X)5Si3 to Nbss during heattreatment at 1500 °C for 50 h in the S1 alloy. Mean while, Ti diffused from Nbss to β(Nb,X)5Si3, which induced a Ti to generate near the interface between Nbss and Ti-rich β(Nb,X)5Si3. The orientation relationship between the newl y-formed a Ti and previous Nbss was (110 )Nb//(1-10-1) αTi and [001]Nb//(12-3-1)αTi. Among the ( Nb,X)5Si3 phases , the contents o f Cr and Al in β(Nb,X)5Si3 are n earl y the same as those in γ(Nb,X)5Si3 but obviously hi gher than those in the α(Nb,X)5Si3, where as the content of Si in α(Nb,X)5Si3 is nearly the same a s that in γ(Nb,X)5Si3 but higher than that in the β(Nb,X)5Si3     

A novel audio watermarking scheme using multiscale wavelet modulation

A novel audio watermarking scheme to embed robust and inaudible watermarks for the purpose of copyright protection is proposed. The key innovation is to add time-frequency redundancy into watermark signals by multiscale wavelet modulation. In order to maximize the watermarking strength within perceptual constraints, the signals synthesized from different scales are masked using a frequency auditory model, respectively, and then intergrated to form the final watermark signal. The detection structure is built using the redundancy in watermark signals, and the performance is further enhanced by modeling the statistical behaviors of wavelet coefficients as generalized Gaussian distribution. The use of original audio signal is not required in watermark detection. The experimental results show that our approach can achieve not only good transparency but also satisfying robustness to common audio manipulations.     

Control of coupling among three major factors for formation of high-efficiency gas reservoir——A case study on the oolitic beach gas reservoir in Feixianguan Formation in the northeast Sichuan Basin

Through a case study of the high-efficiency gas reservoir in Feixianguan Formation in the northeast Sichuan Basin, quantitative and semi-quantitative analyses of key elements such as hydrocarbon generation, migration and accumulation, and reservoir evolution as well as their interplay in the critical moment of reservoir formation controlled by the energy field were carried out, by means of numerical modeling of the energy field. It was found that the climax time for Permian hydrocarbon generation was Late Triassic-Early Jurassic and accumulation of oil and gas has resulted in large-scale paleoreservoirs in paleostructural traps in Feixianguan Formation, a process facilitated by fractures connecting the sources. The paleoreservoirs have been turned into high-efficiency gas kitchens due to pyrolysis, which resulted from deep burial at a temperature of 170―210 ℃ as induced by tremendously thick sedimentation in the foreland basin of Daba Mountain in Late Jurassic-Cretaceous period. Meanwhile, abundant acid gas like H2S produced from thermo-chemical sulfate reduction (TSR) at high temperatures leads to extensive dissolution of dolostone in the paleoreservoirs, which may in turn result in modification of the reservoirs and preservation of the reservoir rock porosity. The present distribution of gas reservoirs was ultimately determined in the processes of adjustment, cooling and decompression of the paleoreservoirs resulting from intense deformation in the front of Daba Mountain during the Himalayan orogeny.     

Isolation and identification of the three rice monotelosomics

In order to obtain rice monotelosomic, the progeny of 24 telotrisomics, derived from an indica rice variety, Zhongxian 3037, were screened. The variants that differed morphologically from the diploids and the original primary trisomics as well as the telotrisomics were collected for cytological identification. The variants with 24 chromosomes were selected according to the prometaphase chromosomes. From these variants, three monotelosomies with one chromosome arm deletion in each were verified by fluorescence in situ hybridization （FISH） using a rice centromeric BAC clone of 17p22 as a marker probe. The three monotelosomics were derived from telotrisomic 1S, 4L and 11L, respectively. Further identification was conducted on the prometaphase or pachytene chromosomes of the three variants, which were probed with the same centromeric BAC clone together with the corresponding chromosome arm specific makers, a0059H02 （on the short arm of chromosome 1）, a0034E24 （on the long arm of chromosome 4）, and a0071H11 （on the long arm of chromosome 11）. The results indicated that the telocentric chromosomes in the three monotelosom. ics were derived from their respective corresponding telotrisomics. According to the telocentric chromosomes of the variants, they were monotelosomic 1S （one long arm of chromosome 1 was lost）, monotelosomic 4L （one short arm of chromosome 4 was lost） and monotelosomic 11L （one short arm of chromosome 11 was lost）, respectively.     

Control of coupling among three major factors for formation of high-efficiency gas reservoir A case study on the oolitic beach gas reservoir in Feixianguan Formation in the northeast Sichuan Basin

Through a case study of the high-efficiency gas reservoir in Feixianguan Formation in the northeast Sichuan Basin, quantitative and semi-quantitative analyses of key elements such as hydrocarbon generation, migration and accumulation, and reservoir evolution as well as their interplay in the critical moment of reservoir formation controlled by the energy field were carried out, by means of numerical modeling of the energy field. It was found that the climax time for Permian hydrocarbon generation was Late Triassic-Early Jurassic and accumulation of oil and gas has resulted in large-scale paleoreservoirs in paleostructural traps in Feixianguan Formation, a process facilitated by fractures connecting the sources. The paleoreservoirs have been turned into high-efficiency gas kitchens due to pyrolysis, which resulted from deep burial at a temperature of 170-210℃ as induced by tremendously thick sedimentation in the foreland basin of Daba Mountain in Late Jurassic-Cretaceous period. Meanwhile, abundant acid gas like H2S produced from thermo-chemical sulfate reduction （TSR） at high temperatures leads to extensive dissolution of dolostone in the paleoreservoirs, which may in turn result in modification of the reservoirs and preservation of the reservoir rock porosity. The present distribution of gas reservoirs was ultimately determined in the processes of adjustment, cooling and decompression of the paleoreservoirs resulting from intense deformation in the front of Daba Mountain during the Himalayan orogeny.     

The Microstructure of Graphite Spherulites in Cast Iron

The microstructure of graphite spherulites (G.S.) in Ce addition ductile cast iron was carried out using transmission electron microscopy (TEM) techniques. The structral characterization of the graphites is as following: there are platelets growing along the periphery as well as fan-like structure formed from platelet aggregates in the diameter section of spherulite, in which most of the platelets are with sizes ranging from several to tens nm in radial; the [001] direction of the platelets would have a tend to parallel to radial of the G. S. and meanwhile, they also a small misorientation deviated from the radial among the platelets each other. It shows that the anisotropy of graphites has been restrained by adding Ce element in cast iron and the structural characterization of the G. S. is consistent with the Double' s model of the conical helixes formed in helical growing and branching.     

Decomposition mechanism of chromite in sulfuric acid-dichromic acid solution

The sulfuric acid leaching process is regarded as a promising, cleaner method to prepare trivalent chromium products from chromite; however, the decomposition mechanism of the ore is poorly understood. In this work, binary spinels of Mg-Al, Mg-Fe, and Mg-Cr in the powdered and lump states were synthesized and used as raw materials to investigate the decomposition mechanism of chromite in sulfuric acid-dichromic acid solution. The leaching yields of metallic elements and the changes in morphology of the spinel were studied. The experimental results showed that the three spinels were stable in sulfuric acid solution and that dichromic acid had little influence on the decomposition behavior of the Mg-Al spinel and Mg-Fe spinel because Mg2+, Al3+, and Fe3+ in spinels cannot be oxidized by Cr6+. However, in the case of the Mg-Cr spinel, dichromic acid substantially promoted the decomposition efficiency and functioned as a catalyst. The decomposition mechanism of chromite in sulfuric acid-dichromic acid solution was illustrated on the basis of the findings of this study.