针织服装结构设计方法研究

由针织面料弹性变化及方向性提出建立人体静态净化样板。通过对日本文化原型胸省、肩省处理和松度调整，得到的图形称为“针织服装原型”。对照人体静态净化尺寸作了合理性分析，提出了运用针织服装原型进行结构设计的方法。     

OpenGL 导入3DS 模型模拟服装试穿

提出了通过读取3DS文件并结合OpenGL 图形库构建三维人体模型及服装试穿的新方法。首先利用3DS Studio M AX获得三维人体及服装模型,在分析了3DS文件的结构基础之上,借助Delphi语言对3DS文件进行读取;然后根据读取的顶点相关数据,进行人体与服装的拟合;最后得到所需的人体及服装模型。利用OpenGL 的模型视图变换函数,可以对人体模型进行任意角度的旋转。在此基础上,又利用纹理映射技术进行不同服装材质的模拟,使服装设计者可以从多方位、多角度观察不同材质面料的人体着装效果。     

Study on the Relation between Garment Style and Ease Distribution

IntroductionGarment pattern design is a 3 D to 2 D surfacemapping process. Traditionally, thegarmentpattern designcan be classified as “Drafting Method” and “DrapingMethod”.“Drafting”is a direct drawing of the garmentpattern using known body measurements from themannequin. Since this method does not requiremanipulation in the 3 D space, it is called“flat patterntechnique”. All flatpattern design masters approximate thegarment pattern using …     

三维服装计算机辅助设计的曲面逼近和消隐

本文介绍了三维服装 CAD 系统 GCAD-2中的人体曲面逼近和曲面消隐等的处理方法。三维服装 CAD 系统中的人体曲面模型是三维服装造型的基础,也是二维原型服装的依据。作者按照计算机辅助服装设计的基本要求,根据人体测量系统输入的数据,提出一种在最小二乘意义上的人体曲面逼近方法。采用这种方法,构造的人体曲面模型计算量小,可以方便地进行修改、控制和进行隐面处理和浓淡处理等。     

基于三维人体测量的参数化人台的研究

为了提高服装的合体性，在对三维人体测量结果统计分析的基础上，提出了参数化人台设计技术路线．在VC＋＋．net单文档视图模式下调用OpenGL，通过多边形曲面造型方法实现了可用按钮和键盘来控制的参数化人台设计．结果生成了反映人体特征的标准系列人台和个性化人台，用于三维服装CAD和服装人台的制作。     

Study on Body Form and Garment Size Series of the Middle Age and Aged People

This paper was designed to analyze on the data, which was obtained from "National Physique Fitness Investigation Report (2000)". In order to get the typical body form and figure type of the middle age and aged people, it was focused on the body form data of this group (age 40 - 60). After calculation and analyzing, the distinguishing feature of body form and the distribution of figure type were deduced. Finally, the re-classification of body form for Chinese middle age and aged people was suggested. It as also suggested that a new garment size series especially for the middle age and aged should be built to fit for these people. This conclusion would be useful and significant to design and production for clothing company, especially that who take the aged people as their target consumer.     

基于年龄细分的青年女性身体数据分析

以年龄细分为依据,针对西北地区18～25岁在校女大学生,采用随机抽样的方式,使用目前最先进的德国3D非接触三维人体测量仪进行身体数据采集,并以SPSS11.0数据软件进行分析,得出控制部位相关数值.所得数据可以直接用于原型制板及制作规格尺寸参考,对于女装生产企业具有一定的实用性和参考性.     

基于VRML的服装协同设计系统

基于虚拟现实技术，提出了一个服装协同设计的原型系统．该系统采用VRML技术构建，以三维服装模型为设计对象，为异地设计师交流协作提供了平台．分析了服装设计的特定要求，建立了该原型系统的各主要功能模块，探讨了组建该协同环境的关键技术．该系统是服装业应用虚拟现实技术实现数字化的一项有益尝试．     

DESIGN AND IMPLEMENTATION OF A 3-DIMENSIONAL COMPUTER AIDED GARMENT DESIGN SYSTEM

A 3-Dimensional computer aided garment design (CAGD) system has been developed andimplemented on a high-performance workstation. We studied various approaches to the func-tional modelling of garment designs for the system. According to the characteristic data of a hu-man body, the models of human body and the garment are displayed on the screen, then we canmodify the garment with various styles and different sizes. The system can transform the 3-Dgarment to the 2-D pieces. The system has improved design efficiency. Various potential alterna-tives and improvement of the system have also been studied and explored.     

中韩两国青年女性着装意愿与行为比较

以中国江苏省和韩国首尔地区20~25岁青年女性为调查对象,采用问卷调查方式,就中韩两国青年女性对服装造型及不同款式搭配、适体性与长短款变化等款式形态偏爱程度和着装习惯等进行了调查.使用SPSS17.0统计软件,运用描述分析、均值比较、相关分析等统计方法,对中韩两国青年女性着装意愿和着装行为等进行了分析比较.研究结果表明,韩国女性对于紧身凸显体型和身体暴露面积大的服装偏爱度高于中国,中韩两国女性对于宽松型服装的穿着频率都高,这些结论为中韩两国服装行业的产品设计和贸易提供了较有价值的参考信息.     

An Experimental Study of Aspect Ratio on the Tensile Properties of an Elastic Fabric for Making-up of Pressure Garments

The“cut-and-sewn” pressure garments are normally tailored made in various sizes according to the size of human body as well as the area of burn wounds.When a tubular pressure garment is cut in different length and width measurements,different aspect ratio will be occurred on the elastic fabric for making up the pressuregarment. Many therapists in Hong Kong concerned the change of aspect ratio may affect the tensile properties of the elastic fabric and ultimately will affect the skin-and-garment interface pressure for the patient.The aim of     

Digital 3D Modeling of Whole Garment Based on Structure Illumination

IntroductionAs the development of production and design of wholegar ment in the infor mation age ,the digitalization of wholegar ment becomes more and more i mportant and necessaryin the field of textile . The digitalization of whole gar mentprovides the convenience and the advantage for the designand the production of whole gar ment .The digitalization of whole gar ment emphasizes on the3D model of it . Digital3D modelingis referred as a processof the recovery of three-di mensional model fro…     

立体构成在立体裁制教学中的应用

就当今的服装发展趋势而言，单纯的平面结构形式已无法满足现代服装设计的要求，设计界呼唤一种能凭借匠意与经验运用服装材料在人体或模型上进行造型的立体构成艺术，因而立体裁制教学改变了传统概念上的只定义为一种获取服装裁片的裁剪技术，而成为了一种立体造型的设计手段。将立体构成的形式应用在立体裁制教学中可从两方面入手：一为服装材料与人体在空间的立体构成关系，二为服装材料之间的局部立体构成关系。     

Study of 3D Mannequin and Garment Modeling in Garment CAD

On the base of studying the modeling technique of man-nequin and garment curved surface with non-uniform rational B-spline(NURBS),several methods of mannequin data pickup on 2D screen are proposed.A garment style creating method,which gets the key points for garment style modeling by drawing panel contour aroundthe mannequin on the screen and calculating the offset value between the body and the garment,is presented.Then 3D garment styles can be easily modeled with the key points and interactively modified.     

论服装造型与人体关系

本文从美学、心理学、文化学、卫生学，人体测量学，服装人体工程学，材料学，设计学、人体美等角度，对服装造型与人体美的关系作了系统的阐述和分析，作者认为服装造型，一要依附人体体形；二要有利人体健康；三要适应人体运动；四要体现人体美化。     

基于可展曲面的3D服装原型建模与服装样板生成

基于3D人体数据,提出一种新的3D服装原型建模方式,并通过展开得到2D服装样板.首先利用分段水平B样条曲线(PHBC)建立参数化人台,识别人体标记点和服装结构线框架模型,然后分布适当松量在框架模型之中,同时实现基于框架模型的可展曲面构造方法——DBT算法,最后通过整合带有松量的框架和DBT算法,构建出可展3D服装原型,并生成服装样板.     

试论"欧美板"在中国成衣业中的可借鉴性

板型是一项充满艺术创造的技术，是成衣业的主要技术支柱。该文认为中国成衣业应借鉴欧美板的科学理念，从观念更新、标准服装人体和服装规格的研究确立及制板原理等方面着手研究，进而推动中国成衣业的发展。     

影响青年女性服装衣袖结构的人体参数研究

使用三维人体扫描技术采集了与服装衣袖结构设计相关的人体数据，应用SPSS软件对这些数据进行主成分分析、因子分析、相关分析和回归分析等一系列的数据分析，发现了人体各部位间潜在的关系，并得出了一系列影响青年女性服装衣袖结构设计的人体参数的回归方程，为紧身合体式女装衣袖结构设计提供了合理可行的相关人体部位的数据参考。     

国内主要服装零售市场商务休闲男装品牌比价体系研究

选择商务休闲男装品牌作为研究对象，基于国内主要服装零售市场实地调研资料与统计分析，得出商务休闲男装品牌的比价体系，并经产品成本和案例品牌的实证研究，该比价体系一方面丰富了服装营销理论，另一方面对商务休闲男装品牌的价格制定提供指导。     

Ease Allowance Distributed Features of Different Garment Styles

To investigate the effect of fashion style on ease distributed features in different body parts and orientations,three female shirts with the same size specifications but different silhouettes were designed.Seven female participants whose body shape were similar to Chinese garment size standard were scanned by three dimensional human body scanner both with and without experimental shirts.The ease distribution of three shirts was measured and analyzed by using Geomagic Qualify software.The results show that ease distribution of most body parts can be influenced by garment styles except the upper back and chest.Ease allowances are not evenly distributed in different orientations of body parts,and it tends to be lager at lateral body than at medial.This knowledge can be applied in pattern design for better fitness.