壁面绿化及热效应对浅型街谷内污染物扩散与转化的影响研究

采用经风洞实验验证的CFD数值模型,就壁面绿化和热效应对浅型街谷内污染物扩散和NO_x-O₃光化学转化的影响开展研究。考虑了4种壁面受热模式以及4种叶面积密度的壁面绿化模式,并采用臭氧消耗率衡量光化学反应的剧烈程度。结果表明,壁面受热会改变街道峡谷内的流动结构,背风面受热和地面受热能够增加峡谷内顺时针旋涡的尺度,迎风面受热会削弱该旋涡的尺度,全壁面受热则会破坏旋涡结构。壁面绿化的设置能够有效降低峡谷内平均温度,促进峡谷内旋涡结构的重构,并且不同程度降低平均臭氧消耗率。因此,壁面绿化对缓解城市热岛效应和光化学污染具有积极的意义。     

Structures and stability of (HAlNH)n (n=1－15)

The geometries, electronic states, vibrational spectra and thermodynamic properties for (HAlNH)_n clusters with n=1－15 have been investigated using the ab initio DFT/B3LYP method with basis sets 6-31G* and their ground state structures obtained. Comparison of the (HAlNH)_nwith (AlN)_n clusters shows that the skeletons of (HAlNH)_nconsist of four-membered and six-membered rings made of Al-N bonds, and either Al or N atom forms four bonds in which three ones are Al-N bonds and the rest is Al-H or N-H bond. The number of Al-N bonds of (HAlNH)_n is equal to that of (AlN)_n. The magic number regularity of (HAlNH)_n is n =2, 4, 6, 8, etc., all of which are even numbers.     

二维Ti3C2Tx MXene材料的制备与工艺优化

二维（2D）过渡金属碳/氮化物（MXene）材料是当前最受关注的二维材料之一,其中二维碳化钛（Ti₃C₂T_x MXene）材料的研究最为广泛。该材料目前主要通过刻蚀三元碳化物或氮化物（MAX相）后进一步插层得到,因此MAX相材料的纯度和制备工艺条件直接决定了Ti₃C₂T_x MXene材料的物化性质。主要完成了不同Ti₃AlC₂ MAX相材料的筛选,选择氢氟酸（HF）刻蚀,并优化了不同的插层方法,制备了一系列Ti₃C₂T_x MXene材料。通过X射线衍射（XRD）、场发射扫描电镜（FESEM）、透射电子显微镜（TEM）、原子力显微镜（AFM）和X射线光电子能谱（XPS）等表征,确定使用原位锂离子（Li⁺）插层法可有效获得单层Ti₃C₂T_x MXene材料。制备的单层Ti₃C₂T_x MXene材料的表面平整,片径约为150 nm,厚度约为2 nm。同时,创新性地采用涡旋震荡辅助材料分层,极大地缩短了超声时间,提高了单层Ti₃C₂T_x MXene材料的产率（可达70%）,并且可以避免材料氧化,为Ti₃C₂T_x MXene材料未来应用提供了新方法。     

氧化吸收法同步脱除燃烧烟气中SO2，NOx和CO2的化学热力学及其评价

湿化学法同步脱除烟气中气态污染物是燃烧源大气污染控制的重要方法之一,为探究采用不同氧化吸收策略同时脱除燃烧烟气中SO_2,NO_x和CO_2的可行性,基于化学热力学原理,分析了9种联合氧化吸收策略的性能,具体的氧化吸收策略包括:H_2O_2-NH_3·H_2O,H_2O_2-MDEA,H_2O_2-NaOH,O3-NH_3·H_2O,O3-MDEA,O3-NaOH,NaClO_2-NH_3·H_2O,NaClO_2-MDEA和NaClO_2-NaOH,并提出新的动态加权法对其性能进行综合评价。结果表明:上述所有策略均具有SO_2,NO_x和CO_2捕获的可行性。O3-NaOH,NaClO_2-MDEA和NaOH做吸收剂的氧化吸收溶液分别对单一脱硫、脱硝和脱碳效果最好。当综合考虑同步脱除SO_2,NO_x和CO_2时,NaClO_2-MDEA优于其他策略,其结果可为燃烧烟气中的气体污染物的联合脱除提供参考。     

Chemical states of the atoms in magnetic multilayers Ta/NiO x /Ni81Fe19/Ta and Co/AlO x /Co

Ta/NiO _x /Ni₈₁Fe₁₉/Ta and Co/AlO _x /Co multilayers were prepared by rf reactive and dc magnetron sputtering. The exchange coupling field (H _ex) and the coercivity (H _c) of NiO _x /Ni₈₁Fe₁₉ as a function of the ratio of Ar to O₂ during the deposition process were studied. The composition and chemical states at the interface region of NiO _x /NiFe were also investigated using the X-ray photoelectron spectroscopy (XPS) and peak decomposition technique. The results show that when the ratio of Ar to O₂ is equal to 7 and the argon sputtering pressure is 0.57 Pa, the x value is approximately 1 and the valence of nickel is +2. At this point, NiO _x is antiferromagnetic NiO and the corresponding H_ex is the largest. As the ratio of Ar/O₂ deviates from 7, the H _ex will decrease due to the presence of magnetic impurities such as Ni⁺³ or metallic Ni at the interface region of NiO _x /NiFe, while the H _c will increase due to the metallic Ni. Al layers in Co/AlO _x /Co multilayers were also studied by angle-resolved XPS. Our finding is that the bottom Co could be completely covered by depositing an Al layer about 1.8 nm. The thickness of AlO _x was 1.2 nm.     

Magnetoelectric and converse magnetoelectric res ponses in TbxDy1-xFe2-y alloy ＆ Pb（Mg1/3Nb2/3）（1-x）TixO3 crystal laminated composites

Measured results of magnetoelectric （ME） and converse magnetoelectric （CME） effects of TbxDy1-xFe2-y/ Pb（Mg1/3Nb2/3）（1-x）TixO3/TbxDy1-xFe2-y （TD/PMNT/TD） and PMNT/TD/PMNT laminated composites are presented. ME effect was determined by measuring laminate voltage output under a Helmholtz-generated AC field biased by a DC field （0-1 kOe） （1Oe = 79.58 A/m）. The CME effect was measured by recording the voltage induced in a solenoid encompassing the ME sample while exposed to a DC bias field and PMNT layer driven by a 10 V AC source. The ME and CME responses in the two laminated structure are linear. The highest values of ME coefficients in TD/PMNT/TD and PMNT/TD/PMNT composites are 384 mV/Oe and 158 mV/Oe, respectively, while the highest values of CME coefficients in the two composites are 118 mG/V and 162 mG/V （1 G=10^-4 T）, respectively.     

The concentration quenching characteristics of 5D3-7FJ and 5D4-7FJ (J=0―6) transitions of Tb3+ in YBO3:Tb3+ phosphor

The photoluminescence quenching behaviors of ^5D3-^7Fj and ^5D4-^7Fj （J = 0—6） transitions of Tb^3＋ in YBO3：Tb under 130—290 nm excitation were systematically investigated. The results revealed that the quenching concentrations of both ^5D3-^7Fj and ^5D4-^7Fj transitions of Tb^3＋ in YBO3：Tb were mainly dependent on excitation wavelength. Particularly, the quenching concentrations of ^5D4-^7Fj transitions of Tb^3＋ under 130—290 nm excitation were correlated with excitation bands of YBO3：Tb. The quenching concentrations of ^5D3-^7Fj transitions remained at low concentration （2%） under 186—290 nm excitation and then increased gradually with energy of incoming excitation photon when excited at 130—186 nm. This dependence should be involved in their excitation mechanisms and quenching pathway in particular excitation region.[第一段]     

小球藻(Chlorella vulgaris)抗铵品系的紫外诱变选育

【目的】获得耐受高铵浓度的优良养殖小球藻(Chlorella vulgaris)品系,可以有效防止其在养殖过程中被轮虫,纤毛虫等污染生物吞食。【方法】首先对小球藻进行紫外线诱变,然后用高浓度NH_4HCO_3作为筛选压力对其进行筛选。【结果】筛选到具有生长优势的小球藻突变株B4和C6,培养12d,在NH_4HCO_3浓度为800mg/L、1 000mg/L、1 200mg/L条件下,B4和C6的生物量比出发藻株分别提高41.18%和9.54%,32.64%和29.41%,37.74%和22.85%;对比出发藻株,B4和C6的最大光能转化效率有显著提高。【结论】突变株B4和C6在高铵培养条件下更能显示生长优势,且它们的生长优势可能来自光合效率的提高。     

块结构r-循环矩阵的性质及其算法研究

提出了一种新的块循环矩阵,称之为块首尾差r-循环矩阵(简记为bFLDCM_r)。首先,验证了其线性运算结果和矩阵乘积仍是bFLDCM_r;其次,给出了bFLDCM_r的判别法和非奇异性判定的充要条件,并讨论了bFLDCM_r的对角化;最后,利用Sherman-Morrison-Woodbury公式,给出了三对角块r-循环线性系统求解的直接算法。     

NMR studies of the interaction betweenBacillis subtilis neutral proteinase and inorganic metal compounds

The interaction betweenBacillis subtilis neutral proteinase (B.S.NP) and inorganic metal compounds (CoCl₂, NiCl₂) was investigated by¹H NMR spectroscopy. It has been shown that the Zn(II) ion in the active center of the native enzyme may directly interact with external CoCl₂ and NiCl₂, producing Co(II)- and Ni(II)-substituted derivatives, and their¹H NMR spectra were obtained for the first time. From the¹H NMR spectra, the coordinated structure of the active center in the native enzyme was described.     

完全图Kn的{P5,C5}分解

图分解问题已在很多邻域中得到了广泛的应用。用P₅表示5个顶点的路，C₅表示5个顶点的圈，本研究讨论了完全图K_n分解成5个顶点的路P₅和圈C₅的存在性，给出完全图K_n存在{P₅,C₅}-强制分解的充分必要条件是n≥7(n≠8)，以及完全图K_n存在{P₅,C₅}-分解的充分必要条件是n≥5(n≠6)。     

基于谣言攻击的产品需求波动CISRaRd模型研究

与产品相关的谣言影响个体对于产品的判断及购买欲望,进而波及整个供应链中产品的市场需求.考虑个体的情绪和个体对谣言的判断,将经典谣言传播模型中的免疫者R细分成为蒙蔽者R_a和清醒者R_d,两种状态的个体都知道但不传播谣言,不同的是R_a受谣言蒙蔽相信谣言不购买产品,R_d作为清醒者不相信谣言,且继续购买产品.基于系统动力学构建CISR_aR_d谣言传播模型,对模型进行稳定性证明,探讨谣言攻击对产品需求的遏制情况,并在此基础上进行了数值模拟.研究表明,与产品相关的谣言严重制约产品的市场需求,商家在应对谣言攻击时所作出的正面宣传对于产品需求的恢复有其积极意义.     

均匀分散的纳米银/介孔氮化碳复合微粒的协同光催化性能研究

为了有效还原污染水中的硝基化合物和光解水制氢,采用浸渍法制备纳米银/介孔石墨相氮化碳(Ag/mpg-C_3N_4)复合微粒,继而通过简单吸附法制备Ag/5-OH-ZnTPP/mpg-C_3N_4复合微粒,利用BET,SEM,XRD和XPS等表征方法对所制备复合微粒的形貌、微观结构和组成进行测试,结果显示,介孔石墨相氮化碳(mpg-C_3N_4)呈多孔片层状,纳米银粒子(AgNPs)均匀分散于mpg-C_3N_4表面及片层间。通过UV-vis DRS,PL和PT等表征方法对Ag/5-OH-ZnTPP/mpg-C_3N_4复合微粒的光电性能进行测试,结果表明,AgNPs的引入和锌卟啉的表面敏化作用提高了mpg-C_3N_4基体对可见光的利用率。选用对硝基苯酚还原和光解水制氢为模型反应,经贵金属沉积改性及锌卟啉表面敏化改性后显著提高了mpg-C_3N_4基体的光催化活性。因此,Ag/5-OH-ZnTPP/mpg-C_3N_4复合微粒对4-NP的还原反应及光解水制氢具有高效催化活性。     

准东高铁煤与稻草秆热解NOx前驱物释放规律研究

氨(NH_3)和氰氢酸(HCN)是燃料热解过程中的主要含氮化合物,也是燃烧过程中重要的NO_x前驱物,因此研究热解过程中HCN/NH_3的释放规律与转化机制,对降低NO_x排放意义重大。借助热重-质谱联用(TG-MS)系统开展实验研究,探讨了准东高铁煤与稻草秆热解过程中NO_x前驱物的释放规律。研究表明:准东高铁煤与稻草秆的热解产物中,NH_3是主要的NO_x前驱物;NH_3与HNCO、HCN与CH_3CN的释放规律趋同;同等实验条件下,稻草秆热解的NO_x前驱物释放量明显高于准东高铁煤的;准东高铁煤与稻草秆混合热解时,当稻草杆掺混质量百分比从10%增加至40%时,NO_x前驱物的释放量呈先减少后增加的趋势,NO_x前驱物释放量最低时的掺混比为30%,说明稻草秆与准东高铁煤共热解时,二者对NO_x前驱物的释放具有一定的协同耦合抑制作用。     

首尾差r-循环矩阵的判别方法及逆和广义逆的快速算法

提出了一种新的循环矩阵,称之为首尾差r-循环矩阵(简记为FLDcircr矩阵).验证了它的线性运算、矩阵乘积、逆矩阵等仍为FLDcircr矩阵.通过构造基本FLDcircr矩阵,给出FLDcircr矩阵的判别方法及逆和广义逆的快速算法.     

PPY@Fe_3O_4的制备及其磁共振成像和光热性能

通过合理转化残余铁(Fe)在聚吡咯(PPY)纳米粒子原位生产了磁性四氧化三铁(Fe_3O_4)晶体,从而合成PPY@Fe_3O_4纳米粒子.得到的PPY@Fe_3O_4纳米粒子具有突出的横向弛豫时间(T_2)加权磁共振成像(MRI)效果和良好的光热性能,在肿瘤的诊断和治疗中具有良好的应用前景.     

Fine mapping of the red plant gene R1 in upland cotton(Gossypium hirsutum)

Sub 16 is a substitution line with G. hirsutum cv. TM-1 genetic background except that the 16th chromosome (Chr. 16) is replaced by the corresponding homozygous chromosome of G. barbadense cv. 3-79, and T586 is a G. hirsutum multiple gene marker line with 8 dominant mutation genes. The R ₁ gene for anthocyanin pigmentation was tagged in Chr. 16 in T586. The objective of this research was to screen SSR markers tightly linked with R ₁ by using the F₂ segregating population containing 1259 plants derived from the cross of Sub 16 and T586 and the backbone genetic linkage map from G. hirsutum×G. barbadense BC₁ newly updated by our laboratory. Genetic analysis suggested that the segregation ratio of red plants in the F₂ population fit Mendelian 1:2:1 inheritance, confirming that the red plant trait was controlled by an incomplete dominance gene. Preliminary mapping of R ₁ was conducted using 237 randomLy selected F₂ individuals and JoinMap v3.0 software. Then, a fine map of R1 was constructed using the F₂ segregating population containing 1259 plants, and R ₁ was located between NAU4956 and NAU6752, with only 0.49 cM to the nearest maker loci (NAU6752). These results provided a foundation for map-based cloning of R ₁ and further development of cotton cultivars with red fibers by transgenic technology. Supported by National Natural Science Foundation of China (Grant No. 30730067) and Programme of Introducing Talents of Discipline to Universities (Grant No. B08025)     

Vegetation evolution on the central Chinese Loess Plateau since late Quaternary evidenced by elemental carbon isotopic composition

There are many controversial issues in loess studies such as natural vegetation types on the Chinese Loess Plateau during the historical periods and the spatial and temporal evolution of C3/C4 plants. Elemental carbon isotopic composition （δ^13Cec） in the loess section may offer new evidence for these problems. Elemental carbon （EC） is produced by incomplete combustion of vegetation, and its carbon isotopic composition has a very small difference from that of the formal vegetation, then δ^13Cec can be used as a record to recover the changes of vegetation. Elemental carbon was extracted by applying the oxidation method from the Ioess-paleosol sequence in the central Chinese Loess Plateau, and its car- bon isotope composition was analyzed by the isotope mass spectrometer. The results showed that the vegetation in this region was a mixed type of C3 and C4 plants, dominated with C3 plants in most of the time. Since late Quaternary, C3/C4 plants may not follow a simple glacial-interglacial cycle mode on the Chinese Loess Plateau, but showing fluctuations. C3 plants increased gradually in L4 period, and more C3 plants occurred during $3 period, and C4 plants increased again during L3-- L2 periods, after that, Cs plants dominated again during S1 --S0 periods. During periods of paleosol development, C3 plants were abundant in S3 and S1, and there were more Ca plants in S2 and SO. During periods of loess sedimen- tation, there were more C3 plants in L4 and L1, and there were more C4 plants in L3 and L2. On the orbital timescale, the vegetation variations revealed by δ^13Cec record are consistent with the results of pollen data and also similar to the results obtained by organic carbon isotopic composition since the last glacial period.     

Preparation and optical properties of solid solution semiconductor (Zn x Cd1−x S) doped silica glasses

Semiconductor(Zn_xCd_1−x S) doped silica glasses were prepared by Sol-Gel process andin situ growth technique. The structure of the materials was characterized by X-ray diffraction technique, the particle size of semiconductor crystallites from X-ray patterns was estimated less than 10 nm. From absorption spectra, it is obtained that the absorption edges shifted to short wavelength direction when Zn contents increased, and the absorption edge can be adjusted from 2.46 eV to 2.96 eV by controlling Zn contents. The third-order nonlinear optical susceptibility was studied at 532 nm with 8 ns pulse laser by degenerate four wave mixing (DFWM) technique.     

Synthesis of layered LiMnO2 byin situ oxidation-intercalation and a study of the reaction mechanism and electrochemical performance

Using Mn(OH)₂ as precursor, LiOH as lithiating agent and (NH₄)₂S₂O₈ as oxidant, layeredo-LiMnO₂ was obtained by a novel method—in situ oxidation-intercalation under mild conditions (80 °C). The product was characterized by XRD, ICP, TEM and⁷Li-NMR. The results reveal that orthorhombic LiMnO₂ with high purity and good crystallinity can be obtained by this method. During electrochemical tests, a LiMnO₂/Li cell shows an initial reversible capacity of 208 mAh · g⁻¹ and a reversible capacity of 180 mAh · g⁻¹ after 30 cycles at room temperature.