Electrochemistry study on PEO-LiClO<Subscript>4</Subscript>-ZSM5 composite polymer electrolyte

Allsolid-statelithiumpolymerbatteriesmaybeoneofthebestchoicesforelectrochemicalpowersourceofthefuturecharacterizedbyitshighenergydensities,goodcyclability,reliabilityandsafety[1,2].PEO-LiXbasedpoly-merelectrolyteshadreceivedextensiveattention[4,5],foritspotentialcapabilitytobeusedascandidatematerialforthetraditionalliquidelectrolytes,sinceWrightetal.foundthatthecomplexofPEOandalkalinesaltshadtheabilityofionicconductivityin1973[3].ThegeneralconceptofthetransportofLi+inthepolymerelectrolytewa…     

An electrochemical impedance spectroscopic study of the electronic and ionic transport properties of LiCoO2 cathode

The storage behavior and process of the first delithiation-lithiation of LiCoO2 cathode were investigated by electrochemical impedance spectroscopy(EIS). The electronic and ionic transport properties of LiCoO2 cathode along with variation of electrode potential were obtained in 1 mol·L?1 LiPF6-EC:DMC:DEC electrolyte solution. It was found that after 9 h storage of the LiCoO2 cathode in electrolyte solu-tions,a new arc appears in the medium frequency range in Nyquist plots of EIS,which increases with increasing the storage time. In the charge/discharge processes,the diameter of the new arc is reversi-bly changed with electrode potential. Such variation coincides well with the electrode potential de-pendence of electronic conductivity of the LiCoO2. Thus this new EIS feature is attributed to the change of electronic conductivity of LixCoO2 during storage of the LiCoO2 cathode in electrolyte solutions,as well as in processes of intercalation-deintercalationtion of lithium ions. It has been revealed that the reversible increase and decrease of the resistance of SEI film in charge-discharge processes can be also ascribed to the variation of electronic conductance of active materials of the LiCoO2 cathode.     

Synthesis of LiFePO4 in situ vapor-grown carbon fiber （VGCF） composite cathode material via microwave pyrolysis chemical vapor deposition

One of the most important factors that limits the use of LiFePO 4 as cathode material for lithium ion batteries is its low electronic conductivity.In order to solve this problem,LiFePO 4 in situ vapor-grown carbon fiber (VGCF) composite cathode material has been prepared in a single step through microwave pyrolysis chemical vapor deposition.The phase,microstructure,and electrochemical performance of the composites were investigated.Compared with the cathodes without in situ VGCF,the initial discharge capacity of the composite electrode increases from 109 to 144 mA h g-1 at a 0.5-C rate,and the total electric resistance decreases from 538 to 66.The possible reasons for these effects are proposed.     

Synthesis of LiCo<Subscript>0.3</Subscript>Ni<Subscript>0.7</Subscript>O<Subscript>2</Subscript> as cathode materials for lithium ion batteries by citric acid-assisted sol-gel method

The synthesis process of LiCo0.3Ni0.7O2 was investigated by FT-IR, mass spectroscopy, elemental analysis, SEM, BET, TG/DTA and XRD in this paper. The results revealed that lithium and transition metal ions were trapped homogeneously on an atomic scale throughout the precursor. Li2CO3, NiO and CoO are the intermediate products obtained after decomposition of the precursor and Li2CO3 undergoes direct reactions with NiO and CoO to form LiCo0.3Ni0.7O2. Moreover, the kinetics of formation of LiCo0.3Ni0.7O2 by dtrate sol-gel method is faster than the case of the conventional solid-state reaction between lithium carbonate and corresponding reactants. The single phase of LiCo0.3Ni0.7O2 was synthesized at temperature as low as 550℃. The discharge capacity of LiCo0.3Ni0.7O2 increases from 127 to 185 mAh/g as the caldnation temperature increasing from 550 to 750℃. After 100 cycles, the discharge capacity of the sample calcined at 750℃ is 155 mAh/g. The electrochemical study shows that the LiCo0.3Ni0.7O2 has high discharge capacity and good cycling behavior for lithium ion batteries.     

Synthesis and modification of well-ordered layered cathode oxide LiNi<Subscript>2/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript>

Oxalic-acid-based co-precipitation method was employed to prepare LiNi_2/3Mn_1/3O₂ sample with a high-ordered structure. Li⁺, Ni²⁺ and Mn²⁺ acetates were used as starting materials. The influence of the amount of lithium source in the starting materials on Li⁺ content, disorder of Li⁺-Ni²⁺ ions, and electrochemical performance has been investigated. Rietveld refinement shows that the sample prepared with 20% excess Li-source in the starting materials exhibits a perfect ordered structure. A specific discharge capacity is as high as 172 mAh/g at C/20 in the voltage range of 4.35–2.7 V. However, the cyclability is not satisfactory: about 25.3% fade in capacity was observed over 50 cycles. Chemically stable SiO2 was coated on the surface of LiNi_2/3Mn_1/3O₂ particles. A significant improvement in cyclability was attained with 3 wt% SiO2 coating, which is ascribable to the protection of LiNi_2/3Mn_1/3O₂ particles from being dissolved into the electrolyte.     

Theoretical study on the lithium bond interaction of furan homologues C4H4Y （Y=O,S） with LiCH3 via DFT and MP2

The optimizations geometries and interaction energy corrected by BSSE of the complexes between C4H4Y （Y=O, S） and CHiLi have been calculated at the B3LYP/6-311＋＋G^＊＊ and MP2/6-311＋＋G^＊＊ levels. Three complexes were obtained. Abnormally, the calculations showed that all the C10--Li14 bond lengths increased obviously but the blue-shift of C10-Li14 stretching frequency occurred after formed complexes. The calculated binding energy with basis set super-position error （BSSE） and zero-point vibrational energy corrections of complexes I-III is -45.757, -35.700 and -39.107 kJ·mol^-1, respectively. The analyses on the combining interaction with the atom-in-molecules theory （AIM） also showed that a relatively strong lithium bond interaction presented in furan homologues C4H4Y-LiCH3 systems. Natural bond orbital theory （NBO） analysis has been performed, and the results revealed that the complex I is formed with n-σ type lithium bond interaction between C4H40 and LiCH3, complex II is formed with TT-s type lithium bond interaction between C4H4O and LiCH3, and complex III is formed with TT-s and n-s type lithium bond interactions between C4H4S and LiCH3, respectively.     

Filter Paper-Derived Three-Dimensional Carbon Fibers Film Supported Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> as a Superior Binder-Free Anode Material for High Performance Lithium-Ion Batteries

Highly uniform and tight adhering of Fe₃O₄ particles on carbon fiber film (Fe₃O₄/CFF) is achieved through a simple in-situ thermal oxidation method. Particularly, 3D CFF with interconnected structure can shorten transfer path and buffer the volume expansion during charge-discharge cycling. Herein, the obtained Fe₃O₄/CFF anode exhibits a stable cycling performance and excellent high rate capability. The cell delivers a reversible capacity of 1 711 mAh·g^–1 at a current density of 100 mA·g^–1 after 100 cycles. Even at a high rate density of 2 A·g^–1, the specific capacity also can maintain 1 034 mAh·g^–1 after 100 cycles. The simplified fabrication is featured with low-cost and this binder-free perspective holds great potential in mass-production of high-performance metal oxide electrochemical devices.     

MgFeSiO4 prepared via a molten salt method as a new cathode material for rechargeable magnesium batteries

Well-crystallized MgFeSiO₄ microparticles were synthesized at different temperatures by a simple molten salt method using KCl flux. As a new cathode for rechargeable magnesium batteries, the material shows a reversible Mg²⁺ intercalation-deintercalation process. In 0.25 mol/L Mg(AlCl₂EtBu)₂/THF electrolyte, MgFeSiO₄ synthesized at 900??C can deliver a 125.1 mAh/g initial discharge capacity and a 91.4% capacity retention on the 20th cycle at a rate of 0.1C (about 15.6 mA/g). The results show that MgFeSiO₄ could be a good host for Mg²⁺ intercalation, and a potential cathode material for high-energy rechargeable magnesium batteries.     

Thermoluminescence characteristics of Li2B4O7：Cu,As,P

This paper reports the thermoluminescence （TL） characteristics of lithium borate activated by Cu, Ag and P. The glow curves and spectra of thermoluminescence were measured, and the thermoluminescence response as a function of the absorbed dose and the fading behavior were studied. The results indicate that TL of this material has a low fading and wide linear dose response （10^-4-10^3 Gy）.     

结晶态FePO4在锂电池中的应用

在不同的温度、物质的量比和煅烧时间等条件下,分别制备FePO4正极材料,并进行X射线衍射(XRD)测试、准开路电压(QOCV)和恒流充放电(CCV)等电化学测试.经湿法研磨后,结晶态FePO4的充放电容量有很大提高,有良好循环特性,表明结晶态FePO4可以通过控制颗粒特性提高比容量,可成为低成本环保型锂电池正极材料.     

Electrochemical reversibility of magnesium deposition-dissolution on aluminum substrates in Grignard reagent/THF solutions

The electrochemical behavior of magnesium deposition-dissolution on scratched aluminum foils in Grignard reagent/tetrahydrofuran (THF) solutions (1 mol L-1 EtMgBr/THF), which is regarded as a potential electrolyte of rechargeable magnesium batteries, was studied by using various methods such as cyclic voltammetry (CV), scanning electron microscopy (SEM), X-ray diffraction (XRD) and charge-discharge (deposition-dissolution) tests. The results present that the obtained magnesium deposits do not exhibit the morphology of dendrite and the Mg-Al alloy is not found on the surface of aluminum foils. The magnesium deposited on the aluminum substrates have excellent electrochemical cyclic performance in 1 mol L-1 EtMgBr/THF solution. The aluminum can be used as a candidate material of the negative current collector for rechargeable magnesium batteries.     

Electrochemical performance of a nickel-rich LiNi<Subscript>0.6</Subscript>Co<Subscript>0.2</Subscript>Mn<Subscript>0.2</Subscript>O<Subscript>2</Subscript> cathode material for lithium-ion batteries under different cut-off voltages

A spherical-like Ni_0.6Co_0.2Mn_0.2(OH)₂ precursor was tuned homogeneously to synthesize LiNi_0.6Co_0.2Mn_0.2O₂ as a cathode material for lithium-ion batteries. The effects of calcination temperature on the crystal structure, morphology, and the electrochemical performance of the as-prepared LiNi_0.6Co_0.2Mn_0.2O₂ were investigated in detail. The as-prepared material was characterized by X-ray diffraction, scanning electron microscopy, laser particle size analysis, charge-discharge tests, and cyclic voltammetry measurements. The results show that the spherical-like LiNi_0.6Co_0.2Mn_0.2O₂ material obtained by calcination at 900℃ displayed the most significant layered structure among samples calcined at various temperatures, with a particle size of approximately 10 μm. It delivered an initial discharge capacity of 189.2 mAh·g-1 at 0.2C with a capacity retention of 94.0% after 100 cycles between 2.7 and 4.3 V. The as-prepared cathode material also exhibited good rate performance, with a discharge capacity of 119.6 mAh·g-1 at 5C. Furthermore, within the cut-off voltage ranges from 2.7 to 4.3, 4.4, and 4.5 V, the initial discharge capacities of the calcined samples were 170.7, 180.9, and 192.8 mAh·g-1, respectively, at a rate of 1C. The corresponding retentions were 86.8%, 80.3%, and 74.4% after 200 cycles, respectively.     

CuO掺杂纳米SnO2锂离子电池负极材料的合成与电化学性能

以SnCl₄·5H₂O、Cu(NO₃)₂·3H₂O和NH₃·H₂O为原料,采用化学共沉淀法制备了CuO掺杂的纳米SnO₂粉末.运用X射线衍射、扫描电镜等手段对合成粉末进行了表征.将合成粉末作为锂离子电池负极材料,研究了其充放电容量、循环性能和交流阻抗等电化学性能.结果表明：采用化学共沉淀法可以得到平均粒度为87 nm的CuO掺杂的纳米SnO₂粉末;在SnO2中掺入CuO,并没有改变SnO₂的结构,但能够有效抑制SnO₂粒子的长大;CuO掺杂的纳米SnO₂粉末的可逆容量可以达到752 mA·g^-1,经60次循环后,CuO掺杂的纳米SnO₂粉末的容量保持率分别为93.6%,优于纳米SnO₂ (92.0%),掺杂CuO改善了纳米SnO₂的循环性能.     

Enhanced low-temperature performance of slight Mn-substituted LiFePO<Subscript>4</Subscript>/C cathode for lithium ion batteries

Low temperature performance of LiFePO₄/C cathode was remarkably improved by slight Mn-substitution. Electrochemical measurements showed that about 95% of the discharge capacity of LiFe_0.98Mn_0.02PO₄/C cathode at 20°C was obtained at 0°C, compared to 85% of that of LiFePO₄/C cathode. The LiFe_0.98Mn_0.02PO₄/C sample also presented enhanced rate performance at −20°C with the discharge capacities of 124.4 mA h/g (0.1C), 99.8 mA h/g (1C), 80.7mAh/g (2C) and 70 mA h/g (5C), respectively, while pristine LiFePO₄/C only delivered capacities of 120.5 mA h/g (0.1C), 90.7 mA h/g (1C), 70.4 mA h/g (2C) and 52.2 mA h/g (5C). Cyclic voltammetry measurements demonstrated an obvious improvement of the lithium insertion-extraction process of the LiFePO₄/C cathode by slight Mn-substitution. The results of FSEM observation and electrical conductivity measurement indicated that slight Mn-substitution minimized the particle size of LiFe_0.98Mn_0.02PO₄/C and also obviously improved the electrical conductivity of the compound, thus obviously enhances the interface reaction process on the cathode.     

Materials for Lithium Batteries Prepared via Mechanochemical Route

1 Results Nanostructured materials are currently of interest for lithium-ion batteries due to relevant demands for high-rate performance batteries and the aspect of structural stability (reversibility) under charge-discharge processes.Decreasing of particle size facilitates the reducing of diffuse paths for lithium ions as compared with micron-sized materials and the increasing of surface contact between electrode and electrolyte leading to acceleration of ionic transport and of charge-discharge process...     

N-phenylmaleimide as a New Ploymerizable Additive for Overcharge Protection of Lithium-ion Batteries

1 Results In persuit of better safety controls of lithium batteries,much efforts has been focused on the development of the internal and self-actuating overcharge protection additives.We report a novel electropolymerizable electrolyte additive for overcharge protection of lithium batteries. Electrochemical properties and overcharge behavior of NPM as a new polymerizable electrolyte additive for overcharge protection of lithium ion batteries are studied by cyclic voltammetry,charge-discharge measurements...     

Preparation and characterization of a novel composite microporous polymer electrolyte for Li-ion batteries

A novel composite microporous polymer electrolyte composed of poly（vinylidene fluoride-co-hexafluoropropylene） （PVdF-HFP） and mesoporous SBA-15 was prepared. The composite solid polymer electrolyte （CSPE） exhibits ionic conductivity as high as 0.30 mS·cm^-1 with a composition of SBA-15 ： PVdF-HFP=3 ： 8 at room temperature. Infrared transmission spectroscopic results suggested that the mechanism of micropore formation is similar to that of the phase inversion. X-ray diffraction （XRD） results demonstrated that the addition of SBA-15 inhibits the crystallization of PVdF-HFP, while the SBA-15 preserves well its ordered mesoporous structure during the course of preparation. The Li/CSPE/MCF of half-cell was assembled, and it showed a good electrochemical and cyclability performance during charge-discharge cycles.     

石墨烯-碳量子点复合材料的电化学性能研究

采用Hummers法和水热法,制备石墨烯和碳量子点溶液作为前驱体,然后通过一步煅烧法制得石墨烯-碳量子点复合材料。借助SEM、UV-Vis、FTIR等手段,对样品的形貌和结构进行表征;利用循环伏安法(CV)、差分脉冲伏安法(DPV)及恒流充放电循环测试等,重点考察了样品的电化学性能。结果表明,在石墨烯表面负载碳量子点可增加材料的比表面积并改善其机械性能,由于活性位点的增加,所制石墨烯-碳量子点复合电极具有较好的可逆性及电化学活性;在检测不同浓度双氧水时,复合电极的灵敏度为纯石墨烯电极的1.4倍左右;石墨烯-碳量子点复合材料作为锂离子电池负极使用时,与纯石墨烯材料相比具有更好的循环稳定性,且容量保持率提高了1.67倍。     

Li3N film modified separator with homogenization effect of lithium ions for stable lithium metal battery

Lithium metal anode with high theoretical capacity is considered to be one of the most potential anode materials of the next generation. However, the growth of lithium dendrite seriously affects the application of lithium metal anode and the development of lithium metal batteries (LMBs). Herein, an ultrathin Li₃N film modified separator to homogenize the lithium ions and protect the lithium metal anode was reported. Due to the intrinsic properties of Li₃N, the functional separator possessed good thermal stability, mechanical properties and electrolyte wettability, and the homogenization of the lithium ion was realized without increasing the interface impedance. With this functional separator, the Li/Li symmetrical cell could achieve a long cycle with low overpotential for 1000 ​h at a current density of 1 ​mA ​cm⁻². Furthermore, when the full battery was assembled with LiFePO₄ and the discharge capacity could be maintained at 151 mAh g⁻¹ after 400 cycles at 1 ​C. In addition, the full battery also showed good rate performance, and provided a high discharge capacity of 114 mAh g⁻¹ at 5 ​C.     

Electrochemical properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.3</Subscript>Ti<Subscript>0.2</Subscript>O<Subscript>4</Subscript>/Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> cells

Spinel compounds LiNi_0.5Mn_1.3Ti_0.2O₄ (LNMTO) and Li₄Ti₅O₁₂ (LTO) were synthesized by different methods. The particle sizes of LNMTO and LTO are 0.5–2 and 0.5–0.8 μm, respectively. The LNMTO/LTO cell exhibits better electrochemical properties at both a low current rate of 0.2C and a high current rate of 1C. When the specific capacity was determined based on the mass of the LNMTO cathode, the LNMTO/LTO cell delivered 137 mA·h·g⁻¹ at 0.2C and 118.2 mA·h·g⁻¹ at 1C, and the corresponding capacity retentions after 30 cycles are 88.5% and 92.4%, respectively.