几种纯金属熔体原子团簇的微观热收缩现象

利用高温液态金属X射线衍射仪对纯金属In、Ga、Ge、Ag、Cu、Al、Sn等在液相线以上不同温度进行了实验研究,得到了其衍射强度、结构因子、双体分布函数、径向分布函数以及平均最近邻原子间距、原子配位数.实验结果表明,纯金属In、Ge、Ag、Cu、Al、Sn等在液相线以上较大温度范围内,原子团簇都存在微观热收缩现象,几种金属的微观热收缩都具有一个共同的特点--在整个测试温度区间内热收缩是不均匀的,每种金属在各温度区间内的热收缩程度以及特征不同.在此基础上进一步探讨了微观热收缩现象的机理以及熔体内发生的结构变化.     

Firewalking

Summary Firewalking is known throughout recorded history and around the world. Ordinarily it is associated with religious beliefs or mystical states of mind in which the gods or unusual mental powers provide extraordinary protection for true believers or those with proper training. However, firewalking commonly involves hot materials of low heat capacity and poor thermal conductivity and sometimes the use of insulation. The excited or trance-like states of firewalkers contribute to the firewalkers' subjective experience but are not required for a successful walk. We conclude that elementary knowledge of physics and psychology is sufficient to explain the known observations of firewalking.     

超低介电常数材料和多孔SiOCH薄膜

集成电路的特征尺寸将降低到0．1μm，这时器件内部金属连线的电阻和绝缘介质层的电容所形成的阻容造成的延时、串扰、功耗已经成为限制器件性能的主要因素。目前集成电路的金属连线价质层材料为铝／二氧化硅配置，用电阻更小的铜取代铝作金属连线，用低介电常数(低K)材料取代二氧化硅作介质层成为科学意义重要、应用价值巨大的研究课题，微电子器件正经历着一场材料的重大变革中。本文着重评述了纳米尺度微电子器件对低介电常数(低k)薄膜材料的要求，介绍了多孔硅基低k薄膜的研究进展。     

Firewalking

Firewalking is known throughout recorded history and around the world. Ordinarily it is associated with religious beliefs or mystical states of mind in which the gods or unusual mental powers provide extraordinary protection for true believers or those with proper training. However, firewalking commonly involves hot materials of low heat capacity and poor thermal conductivity and sometimes the use of insulation. The excited or trance-like states of firewalkers contribute to the firewalkers' subjective experience but are not required for a successful walk. We conclude that elementary knowledge of physics and psychology is sufficient to explain the known observations of firewalking.     

陶瓷颗粒(纤维)增强聚合物复合电子封装与基板材料

本文论述了陶瓷颗粒(纤维)增强聚合物基复合电子封装与基板材料体系和性能特点,介绍了复合基板材料的实验研究和理论研究进展情况,根据实验研究和文献报道并结合目前在微电子封装领域广泛应用的环氧塑封材料,对复合电子封装与基板材料的发展趋势进行了分析和评述。     

纳米团簇晶体的制备和结构研究

利用表面调制“幻数团簇”的方法制备出Al、Ga和In的纳米团簇人造晶体。这种方法是用Si(111) 7× 7表面作为“模板”生长尺寸相同和分布有序的纳米团簇。通过扫描隧道显微镜 (STM )原位分析结合第一性原理计算确定了金属纳米团簇的原子结构以及这些结构的形成机理。我们的研究表明对生长动力学的精确控制是制备团簇晶体的关键所在。此外 ,这种方法并不局限于制备某一种金属团簇。人造纳米团簇具有高的热稳定性和独特的结构使它们有希望在实际中得到广泛的应用。     

固体氧化物燃料电池金属连接体材料

本文简述了固体氧化物燃料电池(SOFC)连接体材料的发展过程,重点介绍了金属连接体材料的研发现状。目前研究和使用的合金有三种:Cr基合金、Ni基合金和铁素体不锈钢。Cr基合金的耐热温度能达到SOFC的要求,并且其表面氧化后生成的Cr2O3有很高的电导率,但是Cr元素的挥发很容易引起阴极中毒而降低电池性能;Ni基合金有很高的抗氧化性,但其热膨胀系数(TEC)比电解质(如YSZ)大很多,热膨胀系数的不匹配很容易造成电池破裂;铁素体不锈钢能满足SOFC所要求的强度,并且有合适的热膨胀系数,但是也需要在其表面制备保护层来降低氧化速率和Cr挥发。本文以有代表性的合金作为例子对三种合金的性质作了总结,并给出了本实验室所开发的几种Fe-Cr高温合金(铁素体不锈钢)的性能。最后总结了合金连接体的发展方向。     

Thermal conductivity of wax comb and its effect on heat balance in colonial honey bees (Apis mellifera L.)

Summary Wax comb was found to have a thermal conductivity of 0.36×10^–3 cal/cm sec °C. At low air temperatures, honey bees,Apis mellifera L., form clusters inbetween the combs in their nests. The combs provide insulation and the bee behavior actually increases the insulating effectiveness of the combs. When they form a compact living layer over the wax comb, the conductivity can be reduced to 0.065×10^–3 cal/cm see °C. Some aspects of the role of the wax comb in heat balance are examined in this paper.     

Effects of the metals,Be, Fe,Cu and Al,on the mobility of immunoglobulin receptors

Summary Cap formation in mouse spleen cells induced by antiimmunoglobulin was inhibited by the metals Be, Fe, Cu and Al. Be was especially strong as an inhibitor of cap formation. It is suggested that these metals might change the mobility of the membrane and have some biological effects on the cross association of antigen receptors when B lymphocytes are attached by them.     

Tubes,randomness, and Brownian motions: or,how engineers learned to start worrying about electronic noise

In this paper, we examine the pioneering research on electronic noise—the current fluctuations in electronic circuit devices due to their intrinsic physical characteristics rather than their defects—in Germany and the U.S. during the 1910s–1920s. Such research was not just another demonstration of the general randomness of the physical world Einstein’s work on Brownian motion had revealed. In contrast, we stress the importance of a particular engineering context to electronic noise studies: the motivation to design and improve high-gain thermionic-tube amplifiers for radio and wired communications. Engineering scientists’ endeavors to understand electronic noise started in 1918, when Walter Schottky at Siemens formulated a theory of “shot noise,” current fluctuations owing to the random emissions of discrete electrons in a tube. Schottky’s theory was revised and experimentally tested at Siemens, General Electric, and AT&T during the 1920s, leading to the discoveries of several other types of noise and an increasing interest in the thermal fluctuations in electronic circuits. In 1925–1928, J.B. Johnson and Harry Nyquist at Bell Labs developed a theory of thermal noise for any electrical resistor at a non-zero temperature. Although these studies were initiated to chart the fundamental performance limit of electronic technology, they ended up assisting the empirical determination of individual electronic components’ characteristics.     

电子封装热应力数值分析

针对目前电子封装的封装密度越来越高、封装厚度越来越薄、封装体在基板上所占面积越来越大,发热引起的失效越来越严重等问题,以晶体管瞬态热应力分析为例,建立热力耦合力学模型.利用ansys研究电子封装热失效问题,得到温度场、应力场和变彤场的分布规律.温度和应力的主要规律包括两点,一是温度和应力都在角点处变化明显,应力比较集中.温度从上到下逐层变化,逐渐减小,并且层与层之间温度变化不大,模型中间部分温度层厚度几乎相同,下半部分同一温度层有规律的变化.二是当温度较高时,在受约束面上和角点处应力值较大,并且在模型的角点和中部出现应力集中现象.     

Scientific Governance in Britain 1914–79

John Harrison (1693–1776) is regarded as the father of chronometry. During his lifetime, he relentlessly pursued one of humankind's greatest and oldest challenges—that of finding the longitude at sea. In succeeding (according to the rules dictated by an Act of Parliament), he bequeathed to humankind the most accurate portable timekeeper the world had ever seen. It is a remarkable fact that his timekeeper, known today as H4, remains more accurate than the majority of expensive mechanical wristwatches manufactured today. Such accuracy required novel approaches to address the various difficulties that befall all mechanical watches, and Harrison overcame many of these with his own innovations. The reduction or elimination of friction is one such problem with clocks and watches, and from an early age Harrison demonstrated his mastery in this subject. This is typified by his choice of woods in his early clocks, and in later clocks by his ‘grasshopper’ escapement. In the 1750s, Harrison's attention switched from clocks to watches, necessitating a hardwearing, low friction material to be found for the pallets in the escapement of his timekeepers. He found these properties in diamond, and in utilizing this to great effect in H4's escapement, he became one of the first people to use diamond as a high-tech material. This paper describes a scientific investigation into the diamond pallets of H4 using Raman microscopy, X-ray diffraction and optical microscopy, to elucidate why diamond was used rather than a more conventional jewel such as ruby, and to gain some insight into how Harrison might have achieved their unconventional morphology. From the evidence presented here, together with evidence collected from primary sources, it is shown that his use of diamond as a hard, low friction material was nothing other than extraordinary, and should be regarded in the same high esteem as his other technological gifts to the world.     

有机功能材料薄膜与器件

具有光、电、磁物理功能的有机材料的出现促进新思想、新概念、新材料的发展；有机功能材料的电子状态、导电机理以及杂质的影响完全有别于无机金属和半导体，因此，在深入探索结构与功能的关系的基础上，有可能开展分子、聚集态以及器件设计的研究。若与有机化合物的结构多样化，良好的加工性、成膜和成纤性等特点相结合，有可能实现无机电子材料所难兼具的电子行为。进而实现“分子电路”的设想。这里，我们对有机功能材料的基本概念、种类，功能材料薄膜的沉积、器件的构筑，分子电子学和分子器件的概念作了一个较为全面的介绍。     

聚苯胺-十二烷基苯磺酸/有机蒙脱土纳米复合材料的合成与表征

以十二烷基苯磺酸(DBSA)为掺杂剂和乳化剂,过硫酸铵(APS)为引发剂,采用乳液插层聚合(emulsion intercalated polymerization)方法合成了十二烷基苯磺酸掺杂聚苯胺/有机蒙脱土纳米复合材料(简称PANI-DBSA/organo-MMT).研究表明,在苯胺、DBSA、APS三者物质量比为1:1:1时,苯胺与有机蒙脱土(organo-MMT)质量比为1:3时,复合材料的电导率最高可达2.63 ×10-2 s/cm.用XRD、FT-IR、TGA和SEM对复合材料进行了表征,结果表明PANI-DBSA能够有效地插层到有机蒙脱土层间,并在蒙脱土表面形成包覆结构,形成连续的导电相,从而使复合材料具有良好的导电性.TGA试验结果表明复合材料的热性能较本体聚合物得到有效改善.     

Application of the ion-thinning methods to the high-resolution study of human dental enamel crystals]

Ion thinning technique applied to high resolution T.E.M. study of human dental enamel crystallites makes it possible to visualize a great number of dislocations. Dislocations proved not to be due to artifacts induced by the ultramicrotome diamond knife. They are related to the crystal apartite structure.     

Rapid temperature programmed gas-liquid chromatography of volatile fatty acids (C1−C7) for the identification of anaerobic bacteria

Summary A gas liquid chromatography method for the separation of 10 volatile fatty acids (C₁–C₇ and isomers) has been improved by using oven temperature programmed conditions. In our conditions, the proprietary stationary phase SP 1220 introduced by Supelco Inc., gave sharp separation of volatile fatty acids in less than 8 min. This method was suitable for analyses with both thermal conductivity and flame ionization detectors.     

多孔Cu2O／SnO2复合薄膜的制备及其可见光催化降解罗丹明B的性能

采用浸渍-沉积方法在电沉积的多孔Cu薄膜上修饰一层纳米SnO2,经低温热氧化处理制备出多孔Cu2O／SnO2复合多层薄膜。运用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X-射线粉末衍射仪（XRD）、紫外可见漫反射光谱（UV—vis DRS）和荧光光谱（FS）技术表征了薄膜的结构、形貌和光学性质。测试了薄膜在可见光下降解罗丹明B（RhB）的性能。结果表明,在30℃的0．2mol／LCuSO4＋1．5mol／L H2SO4镀液中,以1.5A／cm^2电流沉积20s得蓟的多孔Cu薄膜,在SnO2溶胶中浸渍10s并重复5次,再经空气气氛下100℃焙烧30min,锻得的多孔复夸薄膜显示良好的可见光催化降解RhB的性铯。     

Temperaturabhängigkeit der elektrischen Leitfähigkeit einiger Tocopherole

Summary The electrical dark conductivity of several tocopherols has been measured and found to be analogous to that of organic semiconductors. Conductivity at 25°C varies between 10^–14 and 10^{–11 –1} cm^–1. The temperature dependence of the tocopherols yields a thermal activation energy of 1.6 ± 0.15 eV for most of the substances.     

Distribution of metals in annual rings of the beech (Fagus sylvatica) as an expression of environmental changes

Summary Annual rings of 140–160-year-old beeches (Fagus sylvatica) from St. Ingbert, Saarland (FRG) were prepared and analyzed for 14 metals by atomic absorption spectroscopy. According to the chronological variations of their concentrations, the elements could be divided into three groups: 1) Metals without any tendency for chronological changes. This was established for Na, K, Cu, Cr, Co, Ni, Pb, and Cd. 2) Metals with a recent decrease of their concentrations, appropriate for Ca, Mg, Mn, and Zn. 3) Metals with a recent tendency to increase, e.g. Fe and Al. These variations are discussed in connection with the industrial history of the Saarland region and the influence of acid immissions which may alter the soil and thereby the trace element metabolism of the trees with consequences for the vitality of the plants.     

IGBT 模块故障机理及其预报方法综述

以IGBT模块的内部结构和材料特性为基础,研究了焊料层疲劳、铝键接线断裂或剥离、DCB基片失效等封装级故障产生机理;分析栅氧化层击穿、电过应力、辐射失效等器件级故障的产生机理;最后,分别给出了两大类故障的预报方法。