Catalyst enhanced chemical vapor deposition of nano-particle nickel films on teflon surface

Films formed with nanosized nickel particles on teflon surface were prepared by means of catalyst enhanced chemical vapor deposition (CECVD) with Ni(dmg)₂, Ni(acac)₂, Ni(hfac)₂, Ni(TMHD)₂, and Ni(cp)₂ as precursors, and complexes Pd(hfac)₂, PdCl₂ and Pd(η ³-2-methylallyl)acac as catalyst under carrier gas (H₂). The film growth rate depends on the precursors and substrate temperature. The chemical value, purity and surface morphology of the Ni particle films were characterized by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The films obtained were shiny with silvery color, and consisted of grains with a particle size of 50–140 nm. The Ni was metallic of which the purity was about 90%–95% from XPS analysis. SEM micrograph showed that the film had good morphology.      

Synthesis and characterization of carbon-bridged bis(phenolate) lanthanum alkoxides and their catalytic behavior for the polymerization of L-lactide

Four lanthanum alkoxides stabilized by a carbon-bridged bis(phenolate) ligand were synthesized and their catalytic behavior for the ring-opening polymerization of L-lactide was explored. Reactions of [(MBMP)LaCp(THF) 2 ] (MBMP 2 = 2,2′-methylene-bis(6-tert-butyl-4-methyl phenoxo)) with HOCH 2 Ph, HOCH 2 CF 3 , HOCH(CH 3 ) 2 , and HOCH 2 CH 2 N(CH 3 ) 2 , respectively, in a 1:1 molar ratio in THF gave the dimeric lanthanum alkoxo complexes [(MBMP)Ln(μ-OR)(THF) 2 ] 2 (OR = OCH 2 Ph(1), OCH 2 CF 3 (2), OCH(CH 3 ) 2 (3), OCH 2 CH 2 N(CH 3 ) 2 (4)]. These complexes were well characterized, and the definitive molecular structure of complex 1 was determined. It was found that complexes 1 to 4 are efficient initiators for the ring-opening polymerization of L-lactide. The structure of the alkoxo groups has a significant effect on the catalytic behavior, and complex 2 can initiate L-lactide polymerization in a controlled manner.     

Development of Fe(III)-containing ether-functionalized imidazolium ionic liquids for aryl Grignard cross-coupling of alkyl halides

A series of Fe(Ⅲ)-containing imidazolium-based ionic liquids containing ether substituents,including[C3OMim][FeCl4](1,[C3OMim]=1-(2-methoxyethyl)-3-methylimidazolium),[C3OiPim][FeCl4](2,[C3OiPim]=1-isopropyl-3-(2-methoxyethyl)imidazolium),[C3OBim][FeCl4](3,[C3OBim]=1-butyl-3-(2-methoxyethyl)imidazolium),[(C3O)2im][FeCl4](4,[(C3O)2im]=1,3-bis(2-methoxyethyl)imidazolium),[C3OMim][FeBr4](5)and[(C3O)2im][FeBr4](6),were prepared and characterized by elemental analysis,Raman spectroscopy and electrospray ionization mass spectrometry.The catalytic performances of 1–6 and related Fe(III)-based catalysts in the cross-coupling of aryl Grignard reagents with alkyl halides bearing-hydrogens were studied,revealing that mono(ether)functionality improves the catalytic activity and that bis(ether)functionality improves the reusability.After simply decanting the product contained in the ethereal layer,complex 4,which containing bis(ether)-functionalized imidazolium cation,could be successfully recycled seven times.     

C-H···Pd(II) interaction-driven homochiral M helix formation of neutral (R,R)-bis(pyrrol-2-ylmethyl- eneamino) cyclohexane palladium(II) complex

A chiral complex of (R,R)-Pd was prepared by reaction of optically pure (R,R)-bis(pyrrol-2-ylmethyl-eneamino) cyclohexane ligand with Pd(OAc)2·2H2O under the base condition at room temperature. The weak intermolecular C-H···Pd interaction was found to be responsible for the homochiral M helix for-mation of the neutral,chiral,mononuclear (R,R)-Pd in the crystal packing.     

Ionic iron（III） complex of aryloxo-linked bis（imidazolium） cations： efficient and recyclable catalyst for aryl Grignard cross-coupling of alkyl chlorides

A novel phenol-linked bis（imidazolium） salt, H3LCl2 （L = O-4-C（CH3）3-C6H2-2,6-di[CH2{C（NCHCH- NAr）}]2, Ar = 2,6-diisopropylphenyl, 1）, was designed and used to prepare an ionic iron（III） complex [H2L][FeCl4] （2）. Complex 2 was a highly efficient catalyst for aryl Grignard cross-coupling of alkyl chlorides bearing β-hydrogens. Furthermore, complex 2 was reusable and could be reused in at least eight times without significant loss in catalytic activity.     

Synthesis, structure, optoelectronic properties of novel zinc Schiff-base complexes

Two novel zinc Schiff-base complexes, bis-(N-(2-hydroxybenzidene)-p-aminodimethylaniline)zinc(II) (2) and bis-(N-(2-hydroxy-1-naphthidene)-p-aminodimethylaniline)zinc(II) (4) were designed and synthesized. Both the complexes exhibit good solubility in organic solvents and excellent thermal stabilities. A single crystal of 2 was grown and its crystalline structure was determined from X-ray diffraction data. Analysis of the electronic structures of both the zinc complexes calculated by density functional theory reveals a localization of orbital. The UV-Vis absorption and photoluminescence profiles of 4 in thin film are similar to those of 2, but the emission for 4 is red-shifted compared to 2. Three-layered devices with a configuration of ITO/NPB/2/Alq 3 /LiF/Al and ITO/NPB/4/Alq 3 /LiF/Al show a yellow and red emission, respectively.     

Microstructure and improved mechanical properties of ultrafine-grained Mo-12Si-8.5B (at.%) alloys with addition of ZrB2

Multi-hierarchical Mo-12Si-8.5B-x Zr B_2(x=0,0.5,1.0,1.5,2.5 wt%)alloys consisting of three ultrafine-grained(UFG,0.47–0.81μm)phases of Mo_5Si B_2(T2),Mo_3Si and Mo solid solution(α-Mo)were prepared by mechanical alloying following hot pressing.Microstructure observations showed that the intermetallic phases(Mo_3Si and T2)distributed dispersedly in the continuousα-Mo matrix associated with the homogeneously embedded nanoscaled particles(10–225 nm)in the grain interiors and at the grain boundaries.The Mo-12Si-8.5B-x Zr B_2alloys exhibited monotonically increasing compressive strength to 3.13 GPa with increasing content of Zr B_2,and the fracture toughness increased about 27%and reached at 11.5 MPa m~(1/2)at 1.0 wt%Zr B_2,rendering the Mo-12Si-8.5B-1.0 wt%Zr B_2alloy possessing the best combined mechanical properties of high strength and high toughness.The underlying reason for the superior mechanical properties of the Mo-12Si-8.5B-x Zr B_2alloys is that the dispersedly distributed nanosized particles in the UFG multi-phased-matrix can not only effectively block the dislocation motion to increase the strength but also store the dislocations to increase the strain hardening ability during mechanical deformation.     

Selective catalytic reduction of NO x by hydrogen over modified Pd/TiO2-Al2O3 catalyst under lean-burn conditions

A series of Ni, Sn and Ca modified Pd/TiO2-Al2O3 catalysts were prepared by the incipient wetness impregnation method and their catalytic performance for the selective catalytic reduction of NOx by H2 was evaluated. The results showed that the NOx conversion and N2 selectivity were improved over Pd-Sn/TiO2-Al2O3 and Pd-Ni/TiO2- Al2O3 catalysts above 200 ℃. More importantly, the N2 selectivity and high-temperature activity of Pd-Sn/TiO2- Al2O3 catalyst was far superior to the single Pd/TiO2-Al2O3 catalyst. The optimal Sn loading was 2 wt.%. X-ray diffrac- tion （XRD） results showed that the interaction between Pd and Sn promotes the dispersion of Pd over TiO2-Al2O3. Temper- ature-programmed reduction （Ha-TPR） results demonstrated that the addition of Sn contributes to the formation of PdO and improving the redox property of Pd/TiOz-Al2O3. The addi- tives of Ni and Sn also facilitated the absorption of NOx and the oxidation of NO to NOa, which play important roles in the selective catalytic reduction of NOx by hydrogen.     

Hydrothermal synthesis of pyrrhotite (Fex-1S) nanoplates and their antibacterial, cytotoxic activity study

The aim of this study was to synthesize and characterize Fe_(x-1)S 2D-nanostructures with pyrrhotite phase,as well as to explore their biological(antibacterial and cytotoxic)properties,namely the expression of reactive oxygen species(ROS)in the exposure of cells and bacteria.Based on hydrothermal synthesis,the characterization of asprepared 2D-nanostructures was performed by XRD,SEM,EDS,and TEM,in which the single-crystalline pyrrhotite phased Fe_(x-1)S nanoplate morphology was observed.The antibacterial activities of Fe_(x-1)S nanoplates against human pathogenic strains such as Staphylococcus aureus,Escherichia coli,and Enterococcus faecalis were tested.Minimum inhibitory concentration(MIC)and minimum bactericidal concentration(MBC)were determined following the broth microdilution method.Cytotoxicity and expression of intracellular ROS of pyrrhotite nanoplates on Human Gingival Fibroblast(HGF),Human Pulp Cells(HPC)and Human Osteoblast(HBC)were calculated.Cell viability was determined by the MTT method.All experiments were performed of three independent experiments and data were analyzed by Kruskal-Wallis and Mann-Whitney tests,also Pearson′s Correlation was performed.The nanoplates exhibited good bactericidal effect.All types of cells tested showed slight cytotoxicity.It was found that intracellular ROS is produced when cells and bacteria tested are exposed to pyrrhotite nanoplates in presence of both air and peroxide hydrogen.ROS production levels were higher in the bacteria than the cells exposed to these nanoplates.     

Morphology controllable synthesis of Pd/CeO2–ZrO2 catalysts and its structure-activity relationship in three-way catalytic performance

CeO₂–ZrO₂ mixed oxides with controlled morphologies (i.e., nanorod, nano-polyhedral and disordered shape) were synthesized through either hydrothermal or coprecipitation method, and the corresponding supported Pd/CeO₂–ZrO₂ catalysts were also prepared by conventional impregnation. The obtained catalysts were subjected to systematic structural/physio-chemical characterizations as well as three-way catalytic performance evaluations. The results showed that CeO₂–ZrO₂ mixed oxides presented different exposed crystal planes: namely disordered CZ-di mainly exposed (111) crystal planes, nanorod CZ-ro mainly exposed (111) crystal planes and few (100) crystal planes, while nano-polyhedral CZ-po exposed both (111) and (100) crystal planes. Clear structure-activity relationship could be demonstrated between the TWC (Three-way catalysts) performance of Pd/CeO₂–ZrO₂ and such different microstructures, as (100) and (111) crystal planes exposed by CZ-ro and CZ-po were beneficial for the surface oxygen vacancies formation, thus increasing the Pd-support interaction and effectively decreasing the light-off temperature of HC and NO elimination. On the other hand, the disordered CZ-di retained more lattice oxygen content, leading to better catalytic activity of CO elimination for the corresponding Pd/CZ-di catalyst.     

Measurement of the absorption spectrum of H2O+ in the visible region

Together with the 74 lines belonging to (0,9,0)- (0,0,0) band, the high-resolution absorption spectrum of H₂O⁺ A²A₁-X²B₁ system was observed in the visible region of 16680 — 17300 cm^-1 using optical heterodyne magnetic rotation enhanced velocity modulation spectroscopy for the first time, which verifies the high sensitivity and high signal to noise ratio (S/N) of this technique.     

Synthesis, spectra, structure and quantum chemistry study on two novel oxovanadium complexes with hydrotris （pyrazolyl） borate ligands

Vanadium is a trace element in lives. Though vana- dium was investigated in life science from 1876, the importance of vanadium in lives was not recognized until 1971[1,2]. Since bromoperoxidase and nitrogenase were found and proved that vanadium plays an …     

A Ti–Zr–Cu–Ni–Co–Fe–Al–Sn amorphous filler metal for improving the strength of Ti–6Al–4V alloy brazing joint

Ti_(50)Zr_(27)Cu_8Ni_4Co_3Fe_2Al_3Sn_3(at%) amorphous filler metal with low Cu and Ni contents in a melt-spun ribbon form was developed for improving mechanical properties of Ti–6Al–4V alloy brazing joint through decreasing brittle intermetallics in the braze zone. Investigation on the crystallization behavior of the multicomponent Ti–Zr–Cu–Ni–Co–Fe–Al–Sn amorphous alloy indicates the high stability of the supercooled liquid against crystallization that favors the formation of amorphous structure. The Ti–6Al–4V joint brazed with this Ti-based amorphous filler metal with low total content of Cu and Ni at 1203K for 900s mainly consists of α-Ti, β-Ti,minor Ti–Zr-rich phase and only a small amount of Ti_3Cu intermetallics, leading to the high shear strength of the joint of about 460 MPa. Multicomponent composition design of amorphous alloys is an effective way of tailoring filler metals for improving the joint strength.     

Effect of bromization on the propertises of a series of substituted 1,8,15,22—tetra（2,4—ditertbutylphenoxy） phthalocyanines

A series of 1,8,15,22-tetra(2,4-ditertbutylphen-oxy) phthalocyanines [α-（oAr）4PcM,M1=(H)2,M2=Pd,M3=Cu,M4=Zn,M5=Pb] were synthesized in this study.Each compound was bromized in two kinds of solvent.One is the solvent mixture of 1,1,2-trichloroethane and water,the other is 1,1,2-trichloroethane alone.The effects of solvent,bromine excess added and reaction duration on the bromization reaction were studied.The shift of maximum absorbance wave-length both is solution and in solid thin film was investigated comparatively,discovering that both were bathochromism but the former was more.TG data showed that the temperature of thermal decomposition decreased continuously with the increase of numbers of bromine.Finally,the fragments produced during the bromization of (OAr)4PcPb in 1,1,2-trichloroethane were characterized by GC/MS.Based on the electronic structure,the possible mechanism of decomposition of these compounds was presented and discussed.     

A novel Pd/silicalite-1 composite membrane for hydrogen separation

A novel Pd/silicalite-1 composite membrane supported on the macroporous tubular stainless steel substrate was successfully fabricated by electroless plating at 303 K. The structure, morphology and gaseous permeability of the membrane were detected by X-ray diffractiometry （XRD）, scanning electron microscopy （SEM） and single-gas permeation test, respectively. Results confirm the formation of a thin, smooth, and continuous Pd/silicalite-1 composite membrane. The obtained composite membrane shows a high H2 permeance of 1.15×10^-6 mol. m^-2. s^-1. Pa^-1 with moderate H2 selectivity of 250 for H2/N2 at 773 K, at 0.1 MPa pressure drop, suggesting the potential application for H2 separation.     

Synthesis, structure of iron(III)-containing imidazolium salts and their catalytic activity in the alkylation of aryl Grignard reagents

A series of iron(III)-containing imidazolium salts of the general formula [DRim][FeX₄] (R = 2,6-diisopropylphenyl, IPr, X = Cl, 1; R = IPr, X = Br, 2; R = tertbutyl, ^t Bu, X = Cl, 3; R = isopropyl, ⁱ Pr, X = Cl, 4; R = benzyl, Bn, X = Cl, 5; R = Bn, X = Br, 6) have been prepared in high yields via reactions of anhydrous ferric halides with equivalent of the corresponding N,N-dihydrocarby-limidazolium halides, where 2–6 are novel ones. All of the complexes were characterized by elemental analysis, Raman spectroscopy, electrospray ionization mass spectroscopy, and X-ray crystallography for 1 and 2. All of them were non-hygroscopic and air-stable, with four of them existing as solids (1–4) and two as liquids (5 and 6) at room temperature. A preliminary catalytic study on the coupling of 4-tolylmagnesium bromide with cyclohexyl bromide revealed that 1 and 3 possessed the highest activity. In comparison, 2, 4 and 5 exhibited moderate activity and the least active complex was 6.     

简单图的L(2,1,1)-标号

给出了完全图、完全二分图、路、圈等简单图的L(2,1,1)-标号数。对最大度为Δ 的一般图G,给出了构造L(2,1,1)-标号的一个算法, 证明了λ_2,1,1(G)≤Δ³- Δ²+2Δ。     

Enhanced dielectric performance of Dy - substituted YMn2O5 for high-frequency applications

The dielectric performances as well as the effects of Dy³⁺ ions content at A sites of YMn₂O₅ (YMO) [x ​= ​0 (YDM₀) and x ​= ​0.4 (YDM_0.4)] polycrystalline samples were explored. These compounds were synthesized via sol–gel method. X-Ray diffraction and Raman measurements proved the high quality of the compounds that crystallized in an orthorhombic structure with the Pbam space group. Besides, impedance spectroscopy and electrical modulus studies revealed that both samples exhibited a non-Debye's type of relaxation. The decrease of impedance for YDM_0.4 compared to the pure YDM₀, may be attributed to the decrease in charge transfer resistance. Concerning the fit of impedance spectra, they confirmed that both compounds were simultaneously capacitive and resistive. Furthermore, the activation energies obtained from Modulus and complex impedance were proven to be neighboring, suggesting that the relaxation process refers to electron hopping. For each compound, the evolution of ε' and tan ​δ with temperature indicated a clearer relaxor behavior, namely the existence of two relaxations. The first one detected at low temperature is related to the charge carriers hopping between Mn³⁺ and Mn⁴⁺ and the second at high temperature is associated with oxygen vacancies. The reduced hopping rate with Dy³⁺ substitution for Y³⁺ ions at A sites is responsible for the decrease in dielectric constant and dielectric loss. These significant findings demonstrate that these materials can be invested in a fruitful use in UV photo-detector and power applications in high frequency as microwave, millimeter wave signal processing, for civilian, military and space applications.     

Effect of Pd doping on the acetone-sensing properties of NdFeO<Subscript>3</Subscript>

The acetone-sensing properties of the undoped and Pd doped perovskite-type oxides NdFeO₃ were investigated from room temperature to 400°C. The perovskite-type NdFeO₃ was synthesized by a sol-gel method, and the dopants Pd with the content from 1wt% to 5wt% were implanted into NdFeO₃ nanoparticles by thermal diffusion. X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques show that NdFeO₃ is an orthorhombic structure with the average particle size of about 40 nm. A giant acetone-sensing response of 675.7 is observed when the Pd content in NdFeO₃ powders is about 3wt%. The response and recovery time of the sensor to the 5×10⁻⁴ acetone gas are 16 and 1 s, respectively. At the same time, it performs a good selectivity to acetone gas and may be a new promising material candidate for the acetone-sensor development.     

Spectroscopic characterization and stereodynamics of ferrocenylselenoethers Pt(II), Pd(II), Rh(III) complexes

Ferrocenlyselenides (C₅H₅FeC₅H₄SeR, Fe(C₅H₄SeR)₂) and their complexes of metal Pt, Pd, Rh (R=undecenyl, benzyl, phenyl) have been prepared. The spectroscopic characterization has been examined by mass spectrum, XPS, IR and NMR. IR, NMR spectra of C₅H₅Fe C₅H₄Se (CH₂)₉ CH=CH₂PtCl₂ reveal C=C double-bond in Fe(C₅H₄Se (CH₂)₉CH=CH₂)₂ Pt Cl₂ is free because of binding with Pt(II). The results obtained from^H,¹³C and⁷⁷Se NMR indicate that invertomers ofmeso anddl species existence. The ratio ofmeso/dl for BUnSeF Pt is ca 70/30, whereas four and three invertomers for BUnSeF Pt and BBSeFPd have been clearly observed from¹H NMR spectra. Tian Bingshou: born in Feb. 1938, Associate professor